KingNero Posted March 18, 2009 Posted March 18, 2009 (edited) Upon attempting to change the booktype for DVD+R, so I can burn in DVD-R I receive an invalid command operation code error. I've browed around a bit and could not find a solution, I'm also new at this, so please bear with me. HL-DT-ST DVDRAM GSA-T50F TT03 (ATAPI) Current Profile: DVD+R Disc Information: Status: Empty Erasable: No Free Sectors: 2,295,104 Free Space: 4,700,372,992 bytes Free Time: 510:03:29 (MM:SS:FF) Supported Write Speeds: 4x, 8x Disc Control Blocks Information: HL-DT-ST GSA-T50F Physical Format Information (Last Recorded): Disc ID: RITEK-R05-01 Book Type: DVD+R Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,491,711 Last Physical Sector in Layer 0: 0 Edited March 18, 2009 by KingNero
LOCOENG Posted March 18, 2009 Posted March 18, 2009 Disc Information:Status: Empty You have to burn something to the disc before you can booktype it and the result will be DVD-ROM not DVD-R. Have you changed the booktype in the settings for your drive?
KingNero Posted March 18, 2009 Author Posted March 18, 2009 I've only attempted to change settings through IMGburn. I'll burn something and report my findings.
LOCOENG Posted March 18, 2009 Posted March 18, 2009 You have to have a disc in the drive when you change the settings from 'DVD+R' to 'DVD-ROM', then if the change went through you should have a popup saying "success!"
KingNero Posted March 18, 2009 Author Posted March 18, 2009 I'm sorry, but is that before I begin to Burn my Disk or after? If it's before, I still get the error while trying to change
LIGHTNING UK! Posted March 18, 2009 Posted March 18, 2009 It should all be automatic so if it's not working, either your drive doesn't support the booktype command or your drivers are blocking it.
KingNero Posted March 18, 2009 Author Posted March 18, 2009 (edited) Where would I look to see if It's supported? Edit: Nevermind, problem solved, I can Change it now. Edited March 18, 2009 by KingNero
scotty_buttons Posted March 20, 2009 Posted March 20, 2009 yes plz tell us cuz im having the same problem
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now