older than dirt Posted March 20, 2009 Posted March 20, 2009 (edited) what went wrong ,and how do I fix it Disc ID: MKM-001-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (Last Recorded): Disc ID: MKM-001-00 Book Type: DVD-ROM Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,450,783 Last Physical Sector in Layer 0: 2,110,367 I 01:32:40 ImgBurn Version 2.4.2.0 started! I 01:32:40 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 01:32:40 Total Physical Memory: 522,472 KB - Available: 217,028 KB I 01:32:40 Initialising SPTI... I 01:32:40 Searching for SCSI / ATAPI devices... I 01:32:40 Found 1 CD-ROM, 1 DVD Edited March 22, 2009 by older than dirt
LIGHTNING UK! Posted March 20, 2009 Posted March 20, 2009 Have you tried burning at 4x? (note that 1x isn't actually possible... your options are 2.4x and 4x) Where are you Verbatim discs made? (look on the spindle/box) The ones from Singapore are the best. Your drive is getting on a bit now, it's probably got dirty over the years so you could try running a cleaning disc though it. Failing that, get a new drive.
older than dirt Posted March 20, 2009 Author Posted March 20, 2009 Have you tried burning at 4x? (note that 1x isn't actually possible... your options are 2.4x and 4x) Where are you Verbatim discs made? (look on the spindle/box) The ones from Singapore are the best. Your drive is getting on a bit now, it's probably got dirty over the years so you could try running a cleaning disc though it. Failing that, get a new drive. thanks for the fast relpy the disc's are from Singapore learned the hard and expensive way bought memorex first NEVER AGAIN. as far as speed goes most of the post said burn'en slow The disc speed is 2.4 and the only thing lower was 1 will try again at 2.4 . As far as the drive the whole puter is an antique ,but it keep put ,puten along thanks agian for the advice .will clean it and speed it up and give it another try
older than dirt Posted March 21, 2009 Author Posted March 21, 2009 tried at 4x speed and got new errors Failed to read sector -#- Reason L-EC Uncorrectable Error.So now what do i do. Any help is appreciated. thanks to youI 12:44:00 ImgBurn Version 2.4.2.0 started! I 12:44:00 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 12:44:00 Total Physical Memory: 522,472 KB - Available: 181,672 KB I 12:44:00 Initialising SPTI... I 12:44:00 Searching for SCSI / ATAPI devices... I 12:44:00 Found 1 CD-ROM, 1 DVD
Cynthia Posted March 21, 2009 Posted March 21, 2009 Based on the log, your burner is burning the disc so bad that it can't even be read during the verify stage. If you scan the disc with either Nero DiscSpeed or DVDInfoPro I think you will see very bad results even on the parts it could read. Time to get a new shiny burner.
LIGHTNING UK! Posted March 21, 2009 Posted March 21, 2009 Read the last line of my previous post again.
older than dirt Posted March 22, 2009 Author Posted March 22, 2009 Thank You Lighting UK and Cynthia. Guess it is time buy a new burner. going to try to clean it again.Do you have any suggestion on one for my puter optplex110 told ya antique 733 MHz p3 processor 512 ram Thanks again
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now