quickcycles Posted April 8, 2009 Share Posted April 8, 2009 One of my drives will not burn anymore? It just gets to Leadin and then doen't do anymore? No error or anything? Running Windows 7 at the mo. Here's the log: I 14:05:06 ImgBurn Version 2.4.3.0 started! I 14:05:06 Microsoft Windows 7 Ultimate Edition (6.1, Build 7068) I 14:05:06 Total Physical Memory: 1,965,496 KB - Available: 1,207,492 KB I 14:05:06 Initialising SPTI... I 14:05:06 Searching for SCSI / ATAPI devices... I 14:05:06 Found 1 DVD Link to comment Share on other sites More sharing options...
Shamus_McFartfinger Posted April 8, 2009 Share Posted April 8, 2009 Slow your burn down and see what happens. While you're there, toss a blank into your drive and select WRITE MODE from the pulldown menu and then copy and paste the info from the window on the right to this forum. Link to comment Share on other sites More sharing options...
quickcycles Posted April 9, 2009 Author Share Posted April 9, 2009 I write at slow speeds anyway (2.4x) normally so can't go much slower. Is this what you mean for write mode info: PIONEER DVD-RW DVR-215 1.22 (ATA) Current Profile: DVD+R DL Disc Information: Status: Empty Erasable: No Free Sectors: 3,827,520 Free Space: 7,838,760,960 bytes Free Time: 850:35:45 (MM:SS:FF) DVD Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted April 9, 2009 Share Posted April 9, 2009 do all discs (various brands / dyes) get stuck in the same way? What happens if you try with Taiyo Yuden / Verbatim media? Link to comment Share on other sites More sharing options...
quickcycles Posted April 9, 2009 Author Share Posted April 9, 2009 I've tried DVD5 DVD9 and CDr All with the same prob - I'm thinking it's more a drive prob than an IMGburn prob? QC Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted April 9, 2009 Share Posted April 9, 2009 Try the drive in another pc if you can. Link to comment Share on other sites More sharing options...
quickcycles Posted April 9, 2009 Author Share Posted April 9, 2009 don't have another PC I'm afraid to try it in? totally nothing to do with IMGBurn but perhaps you know, it's a new drive that worked ok, but I then upgraded the firmware and (I think) it's since then I've had the probs. Is it possible to downgrade the firmware? QC Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted April 9, 2009 Share Posted April 9, 2009 How about using a linux live cd or something and testing it under that? Or perhaps you've already tried it under a clean build of a non beta OS? (i.e. XP SP3) What controller is the drive attached to? Intel? Nvidia? Official firmware releases don't let you downgrade. I believe there are ways around it though - check the pioneer forum at cdfreaks. Link to comment Share on other sites More sharing options...
Recommended Posts