ChrisMecca Posted April 12, 2009 Posted April 12, 2009 I 18:54:08 ImgBurn Version 2.4.4.0 started! I 18:54:08 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1) I 18:54:08 Total Physical Memory: 3,144,064 KB - Available: 2,284,248 KB I 18:54:08 Initialising SPTI... I 18:54:08 Searching for SCSI / ATAPI devices... E 18:54:10 CreateFile Failed! - Device: '\\.\D:' E 18:54:10 Reason: The maximum number of secrets that may be stored in a single system has been exceeded. W 18:54:10 Errors were encountered when trying to access a drive. W 18:54:10 This drive will not be visible in the program. W 18:54:10 No devices detected! The is only if i have a DL DVD in my drive..... If i have a normal DVD it detects my drive, and after i put a DL DVD in it acts as if another program is using it prevents IMGBURN from using it...anyone know what to do?
LIGHTNING UK! Posted April 12, 2009 Posted April 12, 2009 Something else probably IS accessing the drive. What other burning software do you have installed?
ChrisMecca Posted April 12, 2009 Author Posted April 12, 2009 Something else probably IS accessing the drive. What other burning software do you have installed? I had Nero and DVD Suite w.e that is but that was on the CD that came with my DVD Drive, and i know my DVD Drive can burn DL DVD's, and i believe i tried to uninstall them but still a no go.
LIGHTNING UK! Posted April 13, 2009 Posted April 13, 2009 It's probably something like packet writing software that's messing it up. Go through the add/remove programs thing again in Control Panel.
ChrisMecca Posted April 13, 2009 Author Posted April 13, 2009 It's probably something like packet writing software that's messing it up. Go through the add/remove programs thing again in Control Panel. okay ill look.. do you have any clue what this means though? E 18:54:10 Reason: The maximum number of secrets that may be stored in a single system has been exceeded.
LIGHTNING UK! Posted April 13, 2009 Posted April 13, 2009 It's just the translation to the error code Windows is reporting when ImgBurn tries to access the drive. The error code is 1381 = ERROR_TOO_MANY_SECRETS I have no idea why the OS would be reporting that but let's hope you can track down whatever's causing it.
casketizer Posted April 13, 2009 Posted April 13, 2009 (edited) From my experience this error is triggered when some app tries to access a*.vob or another encrypted file on a DVD before the DVD was authenticated by a DVD Player. Windoze then completely locks the drive and throws out that error. When I last encountered it, it was caused by some Vista Sidebar gadget. Normally this error should only pop up on a Windows Version where US Export Restrictions apply. On those you can only encrypt 4096 files per drive. If exceeded, this error pops up. Edited April 13, 2009 by casketizer
ChrisMecca Posted April 13, 2009 Author Posted April 13, 2009 (edited) From my experience this error is triggered when some app tries to access a*.vob or another encrypted file on a DVD before the DVD was authenticated by a DVD Player. Windoze then completely locks the drive and throws out that error. When I last encountered it, it was caused by some Vista Sidebar gadget. Normally this error should only pop up on a Windows Version where US Export Restrictions apply. On those you can only encrypt 4096 files per drive. If exceeded, this error pops up. Well than how would i fix it? BTW i have a LG IHL-DT-ST_GH22NS30 Edited April 13, 2009 by ChrisMecca
LIGHTNING UK! Posted April 13, 2009 Posted April 13, 2009 Do you actually have a disc in the drive? Did you look for other software that could be using it? Try 'Unlocker' or 'Process Explorer' to see what it might be. You can find more info on these tools in the FAQ.
ChrisMecca Posted April 13, 2009 Author Posted April 13, 2009 (edited) Do you actually have a disc in the drive? Did you look for other software that could be using it? Try 'Unlocker' or 'Process Explorer' to see what it might be. You can find more info on these tools in the FAQ. The thing is that if i have a normal DVD in the drive when i boot up my computer if finds my drive and its fine, but if i put a DL DVD it gives me that error after i hit burn, ive tried unlocker and process explorer they both find nothing else that is using my disk drive, either i uninstalled the wrong drivers a while ago when i was tryin to uninstall a virtual drive manually or there is a bug in the program....but idk, im about to just save whatever i need and go and format my HDD and reinstall windows EDIT: I just realized that this error only comes up when its a Blank DL DVD in my drive, if it has somethin on the DVD it finds my drive perfectly fine EDIT2: I 13:58:42 ImgBurn Version 2.4.4.0 started! I 13:58:42 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1) I 13:58:42 Total Physical Memory: 3,144,064 KB - Available: 2,119,512 KB I 13:58:42 Initialising SPTI... I 13:58:42 Searching for SCSI / ATAPI devices... E 13:58:45 CreateFile Failed! - Device: '\\.\CdRom0' (D:) E 13:58:45 Reason: The maximum number of secrets that may be stored in a single system has been exceeded. W 13:58:45 Errors were encountered when trying to access a drive. W 13:58:45 This drive will not be visible in the program. W 13:58:45 No devices detected! I 13:59:07 Searching for SCSI / ATAPI devices... I 13:59:20 Found 1 DVD Edited April 13, 2009 by ChrisMecca
Recommended Posts