sparafucille Posted December 3, 2011 Share Posted December 3, 2011 Greetings Windows XP Pro ++ SP3 ImgBurn 2.5.6 LG x22 I tried to burn data on a Verbatim DVD+R (speed = x8) twice and failed (Synchronize failed message at the end). Did it many times before. Does this mean that my LG should be replaced? Here's the log file: ; //****************************************\\ ; ImgBurn Version 2.5.6.0 - Log ; שבת, 03 דצמבר 2011, 12:50:23 ; \\****************************************// ; ; I 12:41:58 ImgBurn Version 2.5.6.0 started! I 12:41:58 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 12:41:58 Total Physical Memory: 2,095,532 KB - Available: 1,319,748 KB I 12:41:58 Initialising SPTI... I 12:41:58 Searching for SCSI / ATAPI devices... I 12:41:58 -> Drive 1 - Info: HL-DT-ST DVDRAM GH22LS50 TL02-01 (I:) (ATA) I 12:41:58 Found 1 DVD±RW/RAM! I 12:42:16 Operation Started! I 12:42:16 Building Image Tree... I 12:42:26 Checking Directory Depth... I 12:42:26 Calculating Totals... I 12:42:26 Preparing Image... I 12:42:26 Contents: 16 Files, 4 Folders I 12:42:26 Content Type: Data I 12:42:26 Data Type: MODE1/2048 I 12:42:26 File System(s): ISO9660, Joliet, UDF (1.02) I 12:42:26 Volume Label: 100 I 12:42:26 Size: 4,515,668,195 bytes I 12:42:26 Sectors: 2,204,920 I 12:42:26 Image Size: 4,516,315,136 bytes I 12:42:26 Image Sectors: 2,205,232 I 12:42:27 Operation Successfully Completed! - Duration: 00:00:10 I 12:42:27 Operation Started! I 12:42:27 Source File: -==/\/[bUILD IMAGE]\/\==- I 12:42:27 Source File Sectors: 2,205,232 (MODE1/2048) I 12:42:27 Source File Size: 4,516,315,136 bytes I 12:42:27 Source File Volume Identifier: 100 I 12:42:27 Source File Volume Set Identifier: 3F8365480021A623 I 12:42:27 Source File Application Identifier: ImgBurn v2.5.6.0 - The Ultimate Image Burner! I 12:42:27 Source File Implementation Identifier: ImgBurn I 12:42:27 Source File File System(s): ISO9660, Joliet, UDF (1.02) I 12:42:27 Destination Device: [5:0:0] HL-DT-ST DVDRAM GH22LS50 TL02 (I:) (ATA) I 12:42:27 Destination Media Type: DVD+R (Disc ID: MCC-004-00) I 12:42:27 Destination Media Supported Write Speeds: 4x, 8x, 12x, 16x, 18x, 20x, 22x I 12:42:27 Destination Media Sectors: 2,295,104 I 12:42:27 Write Mode: DVD I 12:42:27 Write Type: DAO I 12:42:27 Write Speed: 8x I 12:42:27 DVD+R Reserve Track: No I 12:42:27 Link Size: Auto I 12:42:27 Lock Volume: Yes I 12:42:27 Test Mode: No I 12:42:27 OPC: No I 12:42:27 BURN-Proof: Enabled I 12:42:27 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x) I 12:42:27 Book Type Setting: DVD-ROM I 12:42:27 Filling Buffer... (40 MB) I 12:42:28 Writing LeadIn... I 12:42:53 Writing Session 1 of 1... (1 Track, LBA: 0 - 2205231) I 12:42:53 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2205231) I 12:49:43 Synchronising Cache... W 12:49:50 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Program Memory Area Update Failure W 12:49:50 Synchronise Cache Failed! - Reason: Program Memory Area Update Failure W 12:49:50 Retrying (1 of 3)... W 12:49:54 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Program Memory Area Update Failure W 12:49:54 Retry Failed - Reason: Program Memory Area Update Failure W 12:49:54 Retrying (2 of 3)... W 12:49:58 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Program Memory Area Update Failure W 12:49:58 Retry Failed - Reason: Program Memory Area Update Failure W 12:49:58 Retrying (3 of 3)... W 12:50:02 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Program Memory Area Update Failure W 12:50:02 Retry Failed - Reason: Program Memory Area Update Failure E 12:50:14 Synchronise Cache Failed! - Reason: Program Memory Area Update Failure I 12:50:14 Synchronising Cache (Last Attempt!)... E 12:50:15 Synchronise Cache Failed! - Reason: Unknown (ASC: 0xA0, ASCQ: 0x80) I 12:50:15 Closing Track... I 12:50:16 Finalising Disc... W 12:50:17 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Session Fixation Error - Incomplete Track in Session W 12:50:17 Finalise Disc Failed! - Reason: Session Fixation Error - Incomplete Track in Session W 12:50:17 Retrying (1 of 3)... W 12:50:18 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Session Fixation Error - Incomplete Track in Session W 12:50:18 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session W 12:50:18 Retrying (2 of 3)... W 12:50:19 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Session Fixation Error - Incomplete Track in Session W 12:50:19 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session W 12:50:19 Retrying (3 of 3)... W 12:50:20 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Session Fixation Error - Incomplete Track in Session W 12:50:20 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session E 12:50:21 Finalise Disc Failed! - Reason: Session Fixation Error - Incomplete Track in Session I 12:50:21 Finalising Disc (Last Attempt!)... E 12:50:21 Finalise Disc Failed! - Reason: Session Fixation Error - Incomplete Track in Session E 12:50:21 Failed to Write Image! I 12:50:21 Exporting Graph Data... I 12:50:21 Graph Data File: E:\Burn\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GH22LS50_TL02_שבת-03-דצמבר-2011_12-42_MCC-004-00_8x.ibg I 12:50:21 Export Successfully Completed! E 12:50:21 Operation Failed! - Duration: 00:07:54 I 12:50:21 Average Write Rate: 10,757 KB/s (7.8x) - Maximum Write Rate: 11,185 KB/s (8.1x) I 12:50:23 Close Request Acknowledged I 12:50:23 Closing Down... I 12:50:23 Shutting down SPTI... I 12:50:23 ImgBurn closed! many thanks Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted December 3, 2011 Share Posted December 3, 2011 Give it one more go at 16x. Have you tried cleaning the drive with a cleaning disc? If it still fails after that, yeah, get yourself another one. Link to comment Share on other sites More sharing options...
mmalves Posted December 3, 2011 Share Posted December 3, 2011 I 12:42:27 Destination Device: [5:0:0] HL-DT-ST DVDRAM GH22LS50 TL02 (I:) (ATA) Also apply the latest firmware for your burner. Link to comment Share on other sites More sharing options...
sparafucille Posted December 3, 2011 Author Share Posted December 3, 2011 I 12:42:27 Destination Device: [5:0:0] HL-DT-ST DVDRAM GH22LS50 TL02 (I:) (ATA) Also apply the latest firmware for your burner. Sorry for my ignorance: did you mean that I should download TL03 from 2010 and apply it? thanks again Link to comment Share on other sites More sharing options...
sparafucille Posted December 3, 2011 Author Share Posted December 3, 2011 Give it one more go at 16x. Have you tried cleaning the drive with a cleaning disc? If it still fails after that, yeah, get yourself another one. This is odd, since I burned under optimal conditions: the PC was closed (shutdown) I opened it, waited for the OS to mount and the disk to stop blinking with its led. So that memory was at it best. No applications was in the background except for the usual processes. And I do it 3-4 times a day. Always at the speed of x8, except for DLs which I burn in x4 (my PC is too weak, still core 2 duo with 2GB RAM) And I never failed in years. but I'm willing to try. thanks for the quick reply Link to comment Share on other sites More sharing options...
sparafucille Posted December 3, 2011 Author Share Posted December 3, 2011 I 12:42:27 Destination Device: [5:0:0] HL-DT-ST DVDRAM GH22LS50 TL02 (I:) (ATA) Also apply the latest firmware for your burner. Bingo!! thank you so much for your good and quick advice. Tomorrow I'll try burning a DL. If it works I won't have to apply the warranty (I still have 9 months to go). bless you! Link to comment Share on other sites More sharing options...
sparafucille Posted December 10, 2011 Author Share Posted December 10, 2011 Greetings I was too quick to deduce that firmware upgrade solved the problem. Situation now is this: succeed in burn one but throw three to the garbage. Didn't add log file since it is the same as the one at the top except for the firmware change. Decided to clean the disk, defrag and see what happens. Small improvement: now I burn one and throw only two to the garbage. maybe it's really time to replace the LG. Will report if replacement helped. Thanks for your help. Link to comment Share on other sites More sharing options...
Recommended Posts