dbminter Posted October 7, 2014 Share Posted October 7, 2014 This is the first time I've tried burning these inkjet Verbatim DVD+R DL's in my new PC. I've burned 2 in a row with the same error. EDIT: This errors out always shortly after the layer break is reached. I/O error ScsiStatus: 0x02 Interpretation: Check condition CDB: 2A 00 00 23 F2 D0 00 00 20 00 Interpretation: Write (10) - Sectors: 2355920 - 2355951 Sense area: 71 00 04 00 23 F0 F0 0E 00 00 00 00 44 00 00 00 00 00 SK Interpretation: Hardware error ASC/ASCQ Interpretation: Internal Target Failure I 18:40:36 Writing Layer 1... (LBA: 1997008 - 3994015)W 18:41:44 Waiting for buffers to recover... (LBA: 2228784)W 18:41:52 Waiting for hard disk activity to reach threshold level...I 18:41:59 Writing Sectors...W 18:42:24 Failed to Write Sectors 2355920 - 2355951 - Reason: Internal Target FailureW 18:42:24 Retrying (1 of 20)...W 18:42:33 Retry Failed - Reason: Invalid Address For WriteW 18:42:33 Retrying (20 of 20)...W 18:42:33 Retry Failed - Reason: Invalid Address For WriteE 18:46:33 Failed to Write Sectors 2355920 - 2355951 - Reason: Internal Target FailureE 18:46:33 Next Writable Address: 2355472I 18:46:33 Synchronising Cache...W 18:46:36 User opted to skip the 'Close Track/Session/Disc' functions.E 18:46:36 Failed to Write Image! I just burned a non inkjet Verbatim DVD+R DL with the same MID (MID: MKM-003-00) last week without a problem in this drive. I'll try burning again in the same drive with one of those DVD+R DL's from the same stack that worked. I can't test in my LG BD drive because it stopped writing DVD+R DL's in January and I use it only as a reader now. I could test on my USB LiteOn but as it's not SATA like this internal drive, the tests wouldn't be the same. Although it would show if the stack of inkjet discs had gone bad if it failed, too. In the meantime, I'll test one of these non inkjet MKM-003-00's and see if the drive maybe has gone bad since last week. But, I'd like to get advice from LUK on what this error may actually mean. Link to comment Share on other sites More sharing options...
dbminter Posted October 8, 2014 Author Share Posted October 8, 2014 Well, looks like the non-inkjet discs are still burning okay. I've gotten past the layer break to almost 80%. So, it seems to be these injket discs somehow. I will let the burn complete and Verify complete to make sure it still works and then try burning one of these inkjets in the USB LiteOn. I'm not entirely sure I've ever burned one of these inkjet MKM-003-00 DVD+R DL's in this Pioneer drive. The drive just may not like them. However, the MID is the same for both discs. That doesn't necessarily mean they're exactly the same, does it? So, whatever you can offer on this LUK would be appreciated. EDIT: The non-inkjet MKM-003-00 burned and Verified with no errors. Link to comment Share on other sites More sharing options...
dbminter Posted October 8, 2014 Author Share Posted October 8, 2014 The USB burn has gotten past the layer break. I'll need for the burn to complete and Verify to finish to know for sure, but I seem to have nailed it down. Yeah, the USB burn on the inkjet MKM-003-00 completed and Verified successfully. The Pioneer doesn't like inkjet MKM-003-00, yet likes non-inkjet MKM-003-00. Go figure. I don't think I've ever actually burned one of these inkets in the drive before. Now I know to test each new drive with each media I have for it to make sure. So, I guess Pioneer goes on my list because it can't write a media I need it to write. However, what choice do I have? LG's don't write 8x DVD+RW correctly and possibly all rewritable DVD media. Anyway, not that it probably matters anymore, but can anyone determine anything about this issue from the error codes I posted before? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 8, 2014 Share Posted October 8, 2014 You should have posted the full log I'd give the pioneer another go having turned on the 'perform opc before write' option. The discs might be slightly off spec from what the firmware expects and that may compensate for it. Link to comment Share on other sites More sharing options...
dbminter Posted October 8, 2014 Author Share Posted October 8, 2014 Sorry. I only posted what I thought was valid. Besides, there's no need for the Retries 2 through 19. I still have the image file I was testing with so I'll try what you said. Link to comment Share on other sites More sharing options...
dbminter Posted October 8, 2014 Author Share Posted October 8, 2014 Where would I turn on this Perform OPC before write option? Link to comment Share on other sites More sharing options...
dbminter Posted October 8, 2014 Author Share Posted October 8, 2014 Never mind. Found it right where it should be. Under the Write Options tab. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 8, 2014 Share Posted October 8, 2014 I was actually more interested in the log entries above what you posted. Link to comment Share on other sites More sharing options...
dbminter Posted October 8, 2014 Author Share Posted October 8, 2014 Well, I changed the settings and was going to post the log after this burn. However, it appears that changing the OPC setting may have done the trick. I'm past where it bombed out before. 72% right now. I will still need for the Verify to complete. I will post the log regardless. Link to comment Share on other sites More sharing options...
dbminter Posted October 8, 2014 Author Share Posted October 8, 2014 Actually, I just looked in the logs folder and found the file containing a full log from a failed burn before. //****************************************\\; ImgBurn Version 2.5.8.0 - Log; Tuesday, 07 October 2014, 19:57:30; \\****************************************//;;I 18:21:57 Project Successfully Loaded!I 18:21:57 ImgBurn Version 2.5.8.0 started!I 18:21:57 Microsoft Windows 8 Core x64 Edition (6.2, Build 9200)I 18:21:57 Total Physical Memory: 12,532,952 KiB - Available: 9,249,348 KiBI 18:21:57 Initialising SPTI...I 18:21:57 Searching for SCSI / ATAPI devices...I 18:21:57 -> Drive 1 - Info: ELBY CLONEDRIVE 1.4 (N:) (SCSI)I 18:21:58 -> Drive 2 - Info: PIONEER BD-RW BDR-209M 1.20-ID60 (S:) (SATA)I 18:21:58 -> Drive 3 - Info: ELBY CLONEDRIVE 1.4 (L:) (SCSI)I 18:21:58 -> Drive 4 - Info: ELBY CLONEDRIVE 1.4 (Q:) (SCSI)I 18:21:58 -> Drive 5 - Info: HL-DT-ST BD-RE WH14NS40 1.03-A0 (K:) (SATA)I 18:21:58 Found 3 BD-ROM/HD DVD-ROMs and 2 BD-RE XLs!I 18:22:12 Operation Started!I 18:22:12 Building Image Tree...I 18:22:13 Corrected file system selection for DVD Video disc.I 18:22:14 Corrected UDF revision selection for DVD Video disc.I 18:22:14 Calculating Totals...I 18:22:14 Preparing Image...I 18:22:19 Using Layer Break LBA: 1855066 -> 2078128 (VTS_02, PGC: 2, Chapter: 1, Cell: 1, Vob/Cell ID: 2/1, Time: 00:00:00, SPLIP: No)I 18:22:19 Contents: 21 Files, 2 FoldersI 18:22:19 Content Type: DVD VideoI 18:22:19 Data Type: MODE1/2048I 18:22:19 File System(s): ISO9660, UDF (1.02)I 18:22:19 Volume Label: [Not Configured]I 18:22:19 IFO/BUP 32K Padding: EnabledI 18:22:19 Region Code: 1, 2, 3, 4, 5, 6, 7, 8I 18:22:19 TV System: NTSCI 18:22:19 Size: 8,054,568,960 bytesI 18:22:19 Sectors: 3,932,895I 18:22:19 Image Size: 8,512,012,288 bytesI 18:22:19 Image Sectors: 4,156,256I 18:22:19 Operation Successfully Completed! - Duration: 00:00:07I 18:22:40 Operation Started!I 18:22:40 Source File Sectors: 3,994,016 (MODE1/2048)I 18:22:40 Source File Size: 8,179,744,768 bytesI 18:22:40 Source File Volume Set Identifier: 45479250003CF191I 18:22:40 Source File Application Identifier: IMGBURN V2.5.8.0 - THE ULTIMATE IMAGE BURNER!I 18:22:40 Source File Implementation Identifier: ImgBurnI 18:22:40 Source File File System(s): ISO9660, UDF (1.02)I 18:22:40 Destination Device: [0:0:0] PIONEER BD-RW BDR-209M 1.20 (S:) (SATA)I 18:22:40 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)I 18:22:40 Destination Media Supported Write Speeds: 2.4x, 4x, 6x, 8xI 18:22:40 Destination Media Sectors: 4,173,824I 18:22:40 Destination Media L0 Data Zone Capacity: 2,086,912 (Changeable: Yes)I 18:22:40 Write Mode: DVDI 18:22:40 Write Type: DAOI 18:22:40 Write Speed: MAXI 18:22:40 DVD+R DL Reserve Track: NoI 18:22:40 Link Size: AutoI 18:22:40 Lock Volume: YesI 18:22:40 Test Mode: NoI 18:22:40 OPC: NoI 18:22:40 BURN-Proof: EnabledI 18:22:40 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x)I 18:22:40 Advanced Settings - Optimal Writing Speed: NoI 18:22:40 Optimal L0 Data Zone Capacity: 1,997,008I 18:22:40 Optimal L0 Data Zone Method: Copied From Original DiscI 18:23:00 Set L0 Data Zone Capacity Succeeded!I 18:23:00 L0 Data Zone Capacity - Effective: 1,997,008I 18:23:00 Filling Buffer... (40 MiB)I 18:23:01 Writing LeadIn...I 18:23:06 Writing Session 1 of 1... (1 Track, LBA: 0 - 3994015)I 18:23:06 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3994015)I 18:23:06 Writing Layer 0... (LBA: 0 - 1997007)I 18:30:10 Writing Layer 1... (LBA: 1997008 - 3994015)W 18:31:46 Failed to Write Sectors 2387408 - 2387439 - Reason: Internal Target FailureW 18:31:46 Retrying (1 of 20)...W 18:31:54 Retry Failed - Reason: Invalid Address For WriteW 18:31:54 Retrying (2 of 20)...W 18:31:54 Retry Failed - Reason: Invalid Address For WriteW 18:31:54 Retrying (3 of 20)...W 18:31:54 Retry Failed - Reason: Invalid Address For WriteW 18:31:54 Retrying (4 of 20)...W 18:31:54 Retry Failed - Reason: Invalid Address For WriteW 18:31:54 Retrying (5 of 20)...W 18:31:54 Retry Failed - Reason: Invalid Address For WriteW 18:31:54 Retrying (6 of 20)...W 18:31:54 Retry Failed - Reason: Invalid Address For WriteW 18:31:54 Retrying (7 of 20)...W 18:31:54 Retry Failed - Reason: Invalid Address For WriteW 18:31:54 Retrying (8 of 20)...W 18:31:54 Retry Failed - Reason: Invalid Address For WriteW 18:31:54 Retrying (9 of 20)...W 18:31:54 Retry Failed - Reason: Invalid Address For WriteW 18:31:54 Retrying (10 of 20)...W 18:31:54 Retry Failed - Reason: Invalid Address For WriteW 18:31:54 Retrying (11 of 20)...W 18:31:54 Retry Failed - Reason: Invalid Address For WriteW 18:31:54 Retrying (12 of 20)...W 18:31:54 Retry Failed - Reason: Invalid Address For WriteW 18:31:54 Retrying (13 of 20)...W 18:31:54 Retry Failed - Reason: Invalid Address For WriteW 18:31:54 Retrying (14 of 20)...W 18:31:54 Retry Failed - Reason: Invalid Address For WriteW 18:31:54 Retrying (15 of 20)...W 18:31:54 Retry Failed - Reason: Invalid Address For WriteW 18:31:54 Retrying (16 of 20)...W 18:31:54 Retry Failed - Reason: Invalid Address For WriteW 18:31:54 Retrying (17 of 20)...W 18:31:54 Retry Failed - Reason: Invalid Address For WriteW 18:31:54 Retrying (18 of 20)...W 18:31:54 Retry Failed - Reason: Invalid Address For WriteW 18:31:54 Retrying (19 of 20)...W 18:31:54 Retry Failed - Reason: Invalid Address For WriteW 18:31:54 Retrying (20 of 20)...W 18:31:54 Retry Failed - Reason: Invalid Address For WriteE 18:32:16 Failed to Write Sectors 2387408 - 2387439 - Reason: Internal Target FailureE 18:32:16 Next Writable Address: 2386960I 18:32:16 Synchronising Cache...W 18:32:19 User opted to skip the 'Close Track/Session/Disc' functions.E 18:32:19 Failed to Write Image!I 18:32:21 Exporting Graph Data...I 18:32:21 Export Successfully Completed!E 18:32:21 Operation Failed! - Duration: 00:09:39I 18:32:21 Average Write Rate: 8,681 KiB/s (6.4x) - Maximum Write Rate: 10,912 KiB/s (8.1x) I freely admit I removed folder names and disc labels for my own privacy. Link to comment Share on other sites More sharing options...
dbminter Posted October 8, 2014 Author Share Posted October 8, 2014 Burn completed. Awaiting Verify results. Link to comment Share on other sites More sharing options...
dbminter Posted October 8, 2014 Author Share Posted October 8, 2014 Verify failed! I 10:10:32 Project Successfully Loaded!I 10:10:32 ImgBurn Version 2.5.8.0 started!I 10:10:32 Microsoft Windows 8 Core x64 Edition (6.2, Build 9200)I 10:10:32 Total Physical Memory: 12,532,952 KiB - Available: 7,448,016 KiBI 10:10:32 Initialising SPTI...I 10:10:32 Searching for SCSI / ATAPI devices...I 10:10:33 -> Drive 1 - Info: ELBY CLONEDRIVE 1.4 (N:) (SCSI)I 10:10:33 -> Drive 2 - Info: PIONEER BD-RW BDR-209M 1.20-ID60 (S:) (SATA)I 10:10:33 -> Drive 3 - Info: ELBY CLONEDRIVE 1.4 (L:) (SCSI)I 10:10:33 -> Drive 4 - Info: ELBY CLONEDRIVE 1.4 (Q:) (SCSI)I 10:10:33 -> Drive 5 - Info: HL-DT-ST BD-RE WH14NS40 1.03-A0 (K:) (SATA)I 10:10:33 Found 3 BD-ROM/HD DVD-ROMs and 2 BD-RE XLs!I 10:46:57 Operation Started!I 10:46:57 Source File Sectors: 3,994,016 (MODE1/2048)I 10:46:57 Source File Size: 8,179,744,768 bytesI 10:46:57 Source File Volume Set Identifier: 45479250003CF191I 10:46:57 Source File Application Identifier: IMGBURN V2.5.8.0 - THE ULTIMATE IMAGE BURNER!I 10:46:57 Source File Implementation Identifier: ImgBurnI 10:46:57 Source File File System(s): ISO9660, UDF (1.02)I 10:46:57 Destination Device: [0:0:0] PIONEER BD-RW BDR-209M 1.20 (S:) (SATA)I 10:46:57 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)I 10:46:57 Destination Media Supported Write Speeds: 2.4x, 4x, 6x, 8xI 10:46:57 Destination Media Sectors: 4,173,824I 10:46:57 Destination Media L0 Data Zone Capacity: 2,086,912 (Changeable: Yes)I 10:46:57 Write Mode: DVDI 10:46:57 Write Type: DAOI 10:46:57 Write Speed: MAXI 10:46:57 DVD+R DL Reserve Track: NoI 10:46:57 Link Size: AutoI 10:46:57 Lock Volume: YesI 10:46:57 Test Mode: NoI 10:46:57 OPC: YesI 10:46:57 BURN-Proof: EnabledI 10:46:57 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x)I 10:46:57 Advanced Settings - Optimal Writing Speed: NoI 10:47:33 Optimal L0 Data Zone Capacity: 1,997,008I 10:47:33 Optimal L0 Data Zone Method: Copied From Original DiscI 10:47:35 Set L0 Data Zone Capacity Succeeded!I 10:47:35 L0 Data Zone Capacity - Effective: 1,997,008I 10:47:36 Filling Buffer... (40 MiB)I 10:47:36 Writing LeadIn...I 10:47:41 Writing Session 1 of 1... (1 Track, LBA: 0 - 3994015)I 10:47:41 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3994015)I 10:47:41 Writing Layer 0... (LBA: 0 - 1997007)I 10:54:45 Writing Layer 1... (LBA: 1997008 - 3994015)I 11:02:03 Synchronising Cache...I 11:02:04 Closing Track...I 11:02:05 Finalising Disc...I 11:03:08 Exporting Graph Data...I 11:03:08 Export Successfully Completed!I 11:03:08 Operation Successfully Completed! - Duration: 00:16:11I 11:03:08 Average Write Rate: 9,277 KiB/s (6.9x) - Maximum Write Rate: 10,927 KiB/s (8.1x)I 11:03:08 Cycling Tray before Verify...I 11:03:23 Device Ready!I 11:03:24 Operation Started!I 11:03:24 Source Device: [0:0:0] PIONEER BD-RW BDR-209M 1.20 (S:) (SATA)I 11:03:24 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00)I 11:03:24 Source Media Supported Read Speeds: 12xI 11:03:24 Source Media Supported Write Speeds: 2.4x, 4x, 6x, 8xI 11:03:24 Source Media Sectors: 3,994,016 (Track Path: OTP - L0: 1,997,008 - L1: 1,997,008)I 11:03:24 Source Media Size: 8,179,744,768 bytesI 11:03:24 Image File Sectors: 3,994,016 (MODE1/2048)I 11:03:24 Image File Size: 8,179,744,768 bytesI 11:03:24 Image File Volume Identifier: Night Of The Living Dead (1968): 30th Anniversary EditionI 11:03:24 Image File Volume Set Identifier: 45479250003CF191I 11:03:24 Image File Application Identifier: IMGBURN V2.5.8.0 - THE ULTIMATE IMAGE BURNER!I 11:03:24 Image File Implementation Identifier: ImgBurnI 11:03:24 Image File File System(s): ISO9660, UDF (1.02)I 11:03:24 Read Speed (Data/Audio): MAX / MAXI 11:03:25 Read Speed - Effective: 5x - 12xI 11:03:25 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3994015)I 11:03:25 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3994015)I 11:03:25 Verifying Layer 0... (LBA: 0 - 1997007)W 11:09:15 Failed to Read Sectors 1976992 - 1977023 - Reason: L-EC Uncorrectable ErrorW 11:09:24 Failed to Read Sectors 1977056 - 1977087 - Reason: L-EC Uncorrectable ErrorW 11:09:31 Failed to Read Sector 1977072 - Reason: L-EC Uncorrectable ErrorW 11:09:31 Sector 1977072 maps to File: \VIDEO_TS\VTS_02_1.VOBE 11:10:15 Failed to Read Sector 1977072 - Reason: L-EC Uncorrectable ErrorE 11:10:15 Sector 1977072 maps to File: \VIDEO_TS\VTS_02_1.VOBE 11:10:15 Failed to Verify Sectors!I 11:10:19 Exporting Graph Data...I 11:10:19 Export Successfully Completed!E 11:10:19 Operation Failed! - Duration: 00:06:51I 11:10:19 Average Verify Rate: 9,644 KiB/s (7.1x) - Maximum Verify Rate: 16,717 KiB/s (12.4x) Forgot to include the screen shot. Reran the Verify manually to get the screen shot of the error. Here's that log with attached screen shot. I 11:14:16 Operation Started!I 11:14:16 Source Device: [0:0:0] PIONEER BD-RW BDR-209M 1.20 (S:) (SATA)I 11:14:16 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00)I 11:14:16 Source Media Supported Read Speeds: 12xI 11:14:16 Source Media Supported Write Speeds: 2.4x, 4x, 6x, 8xI 11:14:16 Source Media Sectors: 3,994,016 (Track Path: OTP - L0: 1,997,008 - L1: 1,997,008)I 11:14:16 Source Media Size: 8,179,744,768 bytesI 11:14:16 Image File Sectors: 3,994,016 (MODE1/2048)I 11:14:16 Image File Size: 8,179,744,768 bytesI 11:14:16 Image File Volume Set Identifier: 45479250003CF191I 11:14:16 Image File Application Identifier: IMGBURN V2.5.8.0 - THE ULTIMATE IMAGE BURNER!I 11:14:16 Image File Implementation Identifier: ImgBurnI 11:14:16 Image File File System(s): ISO9660, UDF (1.02)I 11:14:16 Read Speed (Data/Audio): MAX / MAXI 11:14:17 Read Speed - Effective: 5x - 12xI 11:14:17 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3994015)I 11:14:17 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3994015)I 11:14:17 Verifying Layer 0... (LBA: 0 - 1997007)W 11:20:08 Failed to Read Sectors 1976992 - 1977023 - Reason: L-EC Uncorrectable ErrorW 11:20:16 Failed to Read Sectors 1977056 - 1977087 - Reason: L-EC Uncorrectable ErrorW 11:20:23 Failed to Read Sector 1977072 - Reason: L-EC Uncorrectable ErrorW 11:20:23 Sector 1977072 maps to File: \VIDEO_TS\VTS_02_1.VOBE 11:21:01 Failed to Read Sector 1977072 - Reason: L-EC Uncorrectable ErrorE 11:21:01 Sector 1977072 maps to File: \VIDEO_TS\VTS_02_1.VOBE 11:21:01 Failed to Verify Sectors!I 11:21:04 Exporting Graph Data...I 11:21:04 Export Successfully Completed!E 11:21:04 Operation Failed! - Duration: 00:06:44I 11:21:04 Average Verify Rate: 9,811 KiB/s (7.3x) - Maximum Verify Rate: 16,711 KiB/s (12.4x) Capture_10082014_112037.BMP Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 9, 2014 Share Posted October 9, 2014 Can it burn them at 4x, with or without the opc option enabled? Link to comment Share on other sites More sharing options...
dbminter Posted October 9, 2014 Author Share Posted October 9, 2014 I don't know and I'm not going to test. I'm not going to waste more discs on a fool's errand that isn't going to bear fruit. Link to comment Share on other sites More sharing options...
dbminter Posted April 3, 2015 Author Share Posted April 3, 2015 A new firmware came out for my Pioneer BDR-209M. 1.30 - ID60 So, I tried another inkjet DVD+R DL MKM-003-00 burn. The firmware update apparently did the trick. The burn and verify completed. Link to comment Share on other sites More sharing options...
Recommended Posts