Jump to content
efc1978

only needs single layer disc, won't let burn to dual layer?

Recommended Posts

Posted (edited)

I have a .ISO file of DVD-Audio I want to burn to a Verbatim DVD+R DL, even though the file size will just squeeze onto a single layer DVD I'm trying to burn it to dual layer.

However I keep getting the 2 following screenshots, going around in circles, what do I need to do to be able to write the .ISO to dual layer?

Thanks in advance for any help.

 

236713656_ImgBurn1-2.jpg.a324264ac3de6a4a3f5d4ebf0a480f20.jpg

1467565820_ImgBurn2-2.jpg.73ad0b1381c2fddf49e97e8023ea50dd.jpg

 

ImgBurn 1-2.jpg

Edited by efc1978

Share this post


Link to post
Share on other sites
Posted (edited)

Just created the DVD-Audio .ISO file again on a totally different computer, and got the exact same problem.

Here's the log:

 

I 23:17:53 ImgBurn Version 2.5.8.0 started!
I 23:17:53 Microsoft Windows 7 Professional x64 Edition (6.1, Build 7601 : Service Pack 1)
I 23:17:53 Total Physical Memory: 6,183,084 KiB  -  Available: 4,344,544 KiB
I 23:17:53 Initialising SPTI...
I 23:17:53 Searching for SCSI / ATAPI devices...
I 23:17:56 -> Drive 1 - Info: MATSHITA DVD+-RW UJ8C1 D.02 (D:) (SATA)
I 23:17:56 Found 1 DVD±RW/RAM!
W 23:18:14 User accepted disc space warning and is attempting to underburn!
I 23:18:15 Operation Started!
I 23:18:15 Source File: C:\Users\Brent\Desktop\.iso
I 23:18:15 Source File Sectors: 2,069,231 (MODE1/2048)
I 23:18:15 Source File Size: 4,237,785,088 bytes
I 23:18:15 Source File Volume Identifier: Current
I 23:18:15 Source File Volume Set Identifier: 7A4503E87CD
I 23:18:15 Source File Implementation Identifier: CLN
I 23:18:15 Source File File System(s): ISO9660, UDF (1.02)
I 23:18:15 Destination Device: [1:0:0] MATSHITA DVD+-RW UJ8C1 D.02 (D:) (SATA)
I 23:18:15 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)
I 23:18:15 Destination Media Supported Write Speeds: 2.4x, 4x, 6x
I 23:18:15 Destination Media Sectors: 4,173,824
I 23:18:15 Destination Media L0 Data Zone Capacity: 2,086,912 (Changeable: Yes)
I 23:18:15 Write Mode: DVD
I 23:18:15 Write Type: DAO
I 23:18:15 Write Speed: 4x
I 23:18:15 DVD+R DL Reserve Track: No
I 23:18:15 Link Size: Auto
I 23:18:15 Lock Volume: Yes
I 23:18:15 Test Mode: No
I 23:18:15 OPC: No
I 23:18:15 BURN-Proof: Enabled
I 23:18:18 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)
E 23:18:39 Optimal layer break position must be a multiple of 16.
E 23:18:39 Optimal L0 Sectors: 2,069,225
E 23:18:39 Next Largest Acceptable Value: 2,069,232
E 23:18:50 Operation Failed! - Duration: 00:00:35
I 23:18:51 Average Write Rate: N/A - Maximum Write Rate: N/A
 

Edited by efc1978

Share this post


Link to post
Share on other sites

Are you manually setting layer break position settings?  If it will fit on a DVD-5, there is no need for a layer break as far as I know.

Share this post


Link to post
Share on other sites

It’s not getting to the point of letting me set any positions, basically as soon as I press write I get the 2 screenshots attached in first post.

I’d like to burn to dual layer as the single layer disc is almost full, I can probably only fit 2 more songs on it, and I have a bunch of spare dual layer discs.

 

 

Share this post


Link to post
Share on other sites

You shouldn't be getting layer break settings set at all if it really does fit on a DVD-5.  About the only thing I can think of that might fix this is to create a new ISO that is a DVD-9.  Add some extra files to pad out the size of the ISO so it will need a DVD-9.  If that doesn't fix the problem, I don't know what is causing it.

 

You're just importing a VIDEO_TS folder into a Build job and creating an ISO and that's the ISO you're trying to burn, right?  Did you create the ISO first or are you using on the fly disc creation?

Share this post


Link to post
Share on other sites
Posted (edited)

I created the .ISO file using "save ISO to hard drive" with Cirlinca DVD-Audio Solo 1.6.3, a program that makes proper DVD-Audio and not just a video that plays music...

If it's of any help I have attached a screenshot of the same files I burned "straight to DVD+RDL" using the Cirlinca program instead of first using the program to create .ISO to hard drive then burn with ImgBurn, so I guess the files in the ISO would be the same files you see on the DVD that Cirlinca wrote the original files straight to?,  I don't know about this sort of stuff....

The DVD Cirlinca burned VIDEO_TS says empty, you can see screenshot attached of the DVD layout as it's in my DVD drive.

No I'm not using 'Build', I'm selecting "Write"  the .ISO file on my desktop, that's the correct way to do it isn't it?, it works if I write to single layer DVD, but like I said I want to put it to a dual layer DVD.

Here's the DVD Cirlinca burned files straight to DVD, I think the .ISO would be the same?....

 

IB.jpg.130956ef64a52b387ff32cf6dbaa2ceb.jpg

 

 

Edited by efc1978

Share this post


Link to post
Share on other sites
Posted (edited)

OK I just tried writing the .ISO in "Build" mode instead of "Write" mode which was causing the problems described above in this thread....

When I have tried writing the .ISO in Build mode I get the following pop up...

build1.jpg.4d981583aa078192c971e7874ad101a0.jpg

I clicked yes and it successfully burned to a dual layer disc, however it doesn't play in my DVD-Audio player like it would if I click 'write'.

Just wish I could get it to write to dual layer even though it can just squeeze onto single layer successfully....

Edited by efc1978

Share this post


Link to post
Share on other sites

What it sounds like you did was add an ISO file to a Build job and created an ISO with an ISO file in it.   So, that won't play on a DVD player.

 

I've never actually seen a DVD with any contents in AUDIO_TS before, but I've made, I think, 1 DVD Audio disc in my entire life.

 

Share this post


Link to post
Share on other sites

mmmm, OK so now I'm trying to write to Verbatim DVD+RDL one of Cirlinca's ISO files (as shown above) which does need to fit on a dual layer (ImgBurn says too big for single layer), however when I go to write mode it just burns straight away, and doesn't give me any options to set layer break position. Choosing Build mode the same as described in my post above happens. Is there a way I can choose and set layer break position?

Thanks

Share this post


Link to post
Share on other sites

You said this was a DVD Audio disc, correct?  Now, I'm not entirely sure, but I don't think you need to set layer breaks on those, maybe?  :unsure:  Because layer breaks are set in the video portion of a DVD.  DVD Audio, I believe, is just a giant collection of DVD menus.  And, as you pointed out before, your AUDIO_TS folder contains data, which is probably where the main contents are.

 

I don't know if this is the case, but I would guess it's a possibility.

Share this post


Link to post
Share on other sites
Posted (edited)

I thought maybe I need to set layer break, I'm pretty sure the reason a couple of 24bit/96 dual layer DVD-Audio discs I have burned with the Cirlinca DVD-Audio burning program pause for a second or less is because of layer break, a couple of 24bit/96 discs with totally different music files on them both pause at 2hrs00min:59 secs, the rare times they don't pause at that time and play smootlhly you can hear for a fraction of a second inside the machine a mechanical sound which I guess is the laser changing position? Was hoping to try and burn those particular discs again and try to select seamless layer break, but I guess from your answer it's not going to be an option available. Thanks.

Edited by efc1978

Share this post


Link to post
Share on other sites
Posted (edited)

I'm going to give up on burning dual layer proper DVD-Audio and use Audio Muxer to make a Video that plays audio with blank screen.

I actually think the problem is my DVD-Audio player is slow to change layer break and pauses, rather than the Cirlinca program having a problem as I haven't had a problem burning DVD-Audio in the 10 years years I've been using the program.

I'm getting these options for layer break, which would be best?, the stars don't indicate any is better than the other, does larger or smaller padding number indicate a better position?, also what does the percentage shown for layer break indicate?, I presumed 50/50 means half recording goes on one layer and half recording goes on the other layer, however I'm confused as it's a 135min recording and it says 50/50 from 22 minutes up to 64 minutes, so obvioulsy the first 22 minutes would't be filling one of the layers, so I'm not sure what the % is actually an indication of, can you please explain?, and is there a prefered area of % to choose?, Screenshot attached:

Also have attached a second screenshot, when I select to have seamless layer break do I keep "don't update IFO/BUP files" unselected?

Thanks821093309_layerbreak.jpg.886498c0c374955ed0585754570dc52d.jpg

582732562_dontupdateIFOBUPfiles.jpg.4757605c74054677542ba63d5dfb388c.jpg

Edited by efc1978

Share this post


Link to post
Share on other sites

I don't know much about these options, but I'll do my best to tackle them.

 

The Legend doesn't tell you much about the stars meaning.  However, green colored stars are best and then go down from there.  What "best" means though in this case, I admit, seems arbitrary to me.

 

As for the %, never paid attention to it before so I don't know what it means.  The only options I ever paid attention to are the File/VTS because I always, whenever allowed, set the layer break on a BUP file.  I'd think if the layer break is put on a file, you'd never see a pause at all in any video.

 

I can't think of a reason why you'd never want to update the IFO/BUP files.  I'd think, if you checked that, then you'd just get a non-seamless layer break.  I guess it's there so the code always brings up the layer break options but for people who don't want to set anything can just check that option.  Then again, that doesn't make sense because there's a button for Ignore Layer Break Options.  So, I don't know why that Don't update option is even available.

 

I'm curious.  What happens when you press Preview Selected Cell?  Do you get a preview of anything?  Is it a video stream or a menu screen?

Share this post


Link to post
Share on other sites
Posted (edited)

Will get back to you when I burn next disc about Preview Selected Cell.

OK so Img Burn let me burn as Video with audio to dual layer DVD even though it said would fit on single layer DVD (this was the same audio set Img Burn refused to burn the Cirlinca programe's DVD-Audio .ISO output to dual layer).

I didn't get any layer break options, so I guess it really only does burn to one layer even though I burned to a dual layer Verbatim DVD+RDL.

Here's the log, do you know if anything at all would have been burned to second layer, or it's all 100% on 1 layer?

Thanks

I 12:03:58 ImgBurn Version 2.5.8.0 started!
I 12:03:58 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1)
I 12:03:58 Total Physical Memory: 6,168,740 KiB  -  Available: 3,926,292 KiB
I 12:03:58 Initialising SPTI...
I 12:03:58 Searching for SCSI / ATAPI devices...
I 12:03:59 -> Drive 1 - Info: PLDS DVDRWBD DH-12E3S MD13 (D:) (ATAPI)
I 12:03:59 Found 1 BD-ROM/DVD±RW!
I 12:04:27 Operation Started!
I 12:04:27 Building Image Tree...
I 12:04:27 Checking Directory Depth...
I 12:04:27 Calculating Totals...
I 12:04:27 Preparing Image...
I 12:04:27 Checking Path Length...
I 12:04:27 Contents: 9 Files, 2 Folders
I 12:04:27 Content Type: DVD Video
I 12:04:27 Data Type: MODE1/2048
I 12:04:27 File System(s): ISO9660, UDF (1.02)
I 12:04:27 Volume Label: [Not Configured]
I 12:04:27 IFO/BUP 32K Padding: Enabled
I 12:04:27 Region Code: 1, 2, 3, 4, 5, 6, 7, 8
I 12:04:27 TV System: PAL
I 12:04:27 Size: 4,409,200,640 bytes
I 12:04:27 Sectors: 2,152,930
I 12:04:27 Image Size: 4,409,819,136 bytes
I 12:04:27 Image Sectors: 2,153,232
I 12:04:27 Operation Successfully Completed! - Duration: 00:00:00
I 12:04:38 Operation Started!
I 12:04:38 Building Image Tree...
I 12:04:43 Checking Directory Depth...
I 12:04:43 Calculating Totals...
I 12:04:43 Preparing Image...
I 12:04:43 Checking Path Length...
I 12:04:43 Contents: 9 Files, 2 Folders
I 12:04:43 Content Type: DVD Video
I 12:04:43 Data Type: MODE1/2048
I 12:04:43 File System(s): ISO9660, UDF (1.02)
I 12:04:43 Volume Label: [Not Configured]
I 12:04:43 IFO/BUP 32K Padding: Enabled
I 12:04:43 Region Code: 1, 2, 3, 4, 5, 6, 7, 8
I 12:04:43 TV System: PAL
I 12:04:43 Size: 4,409,200,640 bytes
I 12:04:43 Sectors: 2,152,930
I 12:04:43 Image Size: 4,409,819,136 bytes
I 12:04:43 Image Sectors: 2,153,232
I 12:04:51 Operation Successfully Completed! - Duration: 00:00:12
W 12:04:57 User accepted disc space warning and is attempting to underburn!
I 12:04:57 Operation Started!
I 12:04:57 Source File: -==/\/[BUILD IMAGE]\/\==-
I 12:04:57 Source File Sectors: 2,153,232 (MODE1/2048)
I 12:04:57 Source File Size: 4,409,819,136 bytes
I 12:04:57 Source File Volume Set Identifier: 4EDB60930020DB09
I 12:04:57 Source File Application Identifier: IMGBURN V2.5.8.0 - THE ULTIMATE IMAGE BURNER!
I 12:04:57 Source File Implementation Identifier: ImgBurn
I 12:04:57 Source File File System(s): ISO9660, UDF (1.02)
I 12:04:57 Destination Device: [0:1:0] PLDS DVDRWBD DH-12E3S MD13 (D:) (ATAPI)
I 12:04:57 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)
I 12:04:57 Destination Media Supported Write Speeds: 4x, 6x, 8x
I 12:04:57 Destination Media Sectors: 4,173,824
I 12:04:57 Destination Media L0 Data Zone Capacity: 2,086,912 (Changeable: Yes)
I 12:04:57 Write Mode: DVD
I 12:04:57 Write Type: DAO
I 12:04:57 Write Speed: 4x
I 12:04:57 DVD+R DL Reserve Track: No
I 12:04:57 Link Size: Auto
I 12:04:57 Lock Volume: Yes
I 12:04:57 Test Mode: No
I 12:04:57 OPC: No
I 12:04:57 BURN-Proof: Enabled
I 12:04:57 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)
I 12:04:57 Optimal L0 Data Zone Capacity: 1,076,624
I 12:04:57 Optimal L0 Data Zone Method: ECC Block Boundary
I 12:05:18 Set L0 Data Zone Capacity Succeeded!
I 12:05:18 L0 Data Zone Capacity - Effective: 1,076,624
I 12:05:19 Filling Buffer... (80 MiB)
I 12:05:20 Writing LeadIn...
I 12:05:21 Writing Session 1 of 1... (1 Track, LBA: 0 - 2153231)
I 12:05:21 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2153231)
I 12:05:21 Writing Layer 0... (LBA: 0 - 1076623)
I 12:12:09 Writing Layer 1... (LBA: 1076624 - 2153231)
I 12:18:56 Synchronising Cache...
I 12:18:57 Closing Track...
I 12:18:59 Finalising Disc...
I 12:19:31 Exporting Graph Data...
I 12:19:31 Graph Data File: C:\Users\Ken\AppData\Roaming\ImgBurn\Graph Data Files\PLDS_DVDRWBD_DH-12E3S_MD13_THURSDAY-27-JUNE-2019_12-04_PM_MKM-003-00_4x.ibg
I 12:19:31 Export Successfully Completed!
I 12:19:31 Operation Successfully Completed! - Duration: 00:14:34
I 12:19:31 Average Write Rate: 5,284 KiB/s (3.9x) - Maximum Write Rate: 5,501 KiB/s (4.1x)
I 12:19:31 Cycling Tray before Verify...
W 12:19:39 Waiting for device to become ready...
I 12:19:48 Device Ready!
I 12:19:48 Operation Started!
I 12:19:48 Source Device: [0:1:0] PLDS DVDRWBD DH-12E3S MD13 (D:) (ATAPI)
I 12:19:48 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00)
I 12:19:48 Source Media Supported Read Speeds: 2x, 4x, 6x, 8x
I 12:19:48 Source Media Supported Write Speeds: 4x, 6x, 8x
I 12:19:48 Source Media Sectors: 2,153,232 (Track Path: OTP - L0: 1,076,624 - L1: 1,076,608)
I 12:19:48 Source Media Size: 4,409,819,136 bytes
I 12:19:48 Image File: -==/\/[BUILD IMAGE]\/\==-
I 12:19:48 Image File Sectors: 2,153,232 (MODE1/2048)
I 12:19:48 Image File Size: 4,409,819,136 bytes
I 12:19:48 Image File Volume Set Identifier: 4EDB60930020DB09
I 12:19:48 Image File Application Identifier: IMGBURN V2.5.8.0 - THE ULTIMATE IMAGE BURNER!
I 12:19:48 Image File Implementation Identifier: ImgBurn
I 12:19:48 Image File File System(s): ISO9660, UDF (1.02)
I 12:19:48 Read Speed (Data/Audio): MAX / MAX
I 12:19:49 Read Speed - Effective: 3.2x - 8x
I 12:19:49 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2153231)
I 12:19:49 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2153231)
I 12:19:49 Verifying Layer 0... (LBA: 0 - 1076623)
I 12:25:23 Verifying Layer 1... (LBA: 1076624 - 2153231)
I 12:30:56 Exporting Graph Data...
I 12:30:56 Graph Data File: C:\Users\Ken\AppData\Roaming\ImgBurn\Graph Data Files\PLDS_DVDRWBD_DH-12E3S_MD13_THURSDAY-27-JUNE-2019_12-04_PM_MKM-003-00_4x.ibg
I 12:30:56 Export Successfully Completed!
I 12:30:56 Operation Successfully Completed! - Duration: 00:11:06
I 12:30:56 Average Verify Rate: 6,475 KiB/s (4.8x) - Maximum Verify Rate: 8,497 KiB/s (6.3x)
 

Syd1 AudioMuxer-ImgBurnPC.log

Edited by efc1978

Share this post


Link to post
Share on other sites

Both logs show 2 layers were burnt.  I've never burned a single layer ISO to a DL disc before, so maybe ImgBurn has to burn both layers even if there are no contents on the 2nd layer.

Share this post


Link to post
Share on other sites
Posted (edited)

Just to be clear that burn to dual layer that only needed a single layer disc was not an ISO, it was a DVD/video folder that had audio only, made it with Audio Muxer program.

I was hoping it only burned to 1 layer, as it didn’t give me any layer break options.... I don’t think you can see by the log where the layer break would be can you? eg. time length into DVD it would be at?, so I could go to that point and see if it pauses like the dual layer proper DVD-Audio audio discs I’ve been making have been...

Getting back to you question, I previewed selected cell and all I see is black screen, obviously as it’s a blank video with audio only. The audio sound was just static/hiss.

Edited by efc1978

Share this post


Link to post
Share on other sites

The log only says the size of the layers in Logical Block Addresses.  There's no way to tell times with that information.

 

Here's the weird thing.  This entry in the log:

W 12:04:57 User accepted disc space warning and is attempting to underburn! 

It shows you tried to burn a SL sized ISO to a DL media and chose to okay to burn to the larger sized media.  Yet, both layers were burned.  So, I have to wonder if when you burn DL media, both layers do have to be burned, even if the 2nd layer has only padding on it so it can be burned.

Share this post


Link to post
Share on other sites
Posted (edited)

Thanks for the info, well I'm hopeful that means if the 2nd layer was only burned as padding then hopefully during the audio it won't need to switch layers, therefore hopefully no pause!

OK the last 2 days I've successfully burned to Verbatim dual layer DVD+RDL Video's I made with audio only using Audio Muxer.

I've had 5 successful burns the last 2 days without any problems, however this afternoon burning another DVD+RDL I got an error during the Verify process, also using Verbatim DVD+RDL.

I really don't know but seeing as it burned and errored during Verify I'm guessing it seems to be a bad disc or something wrong with the disc itself?, not the files I'm trying to burn.

EDIT = Have since burned the exact same files successfully to a disc from same box.

 

Screenshot and log below.

1719091418_errorverifying.jpg.9538ffce41d73905098f076f43c21b86.jpg

I 15:08:53 ImgBurn Version 2.5.8.0 started!
I 15:08:53 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1)
I 15:08:53 Total Physical Memory: 6,168,740 KiB  -  Available: 3,838,236 KiB
I 15:08:53 Initialising SPTI...
I 15:08:53 Searching for SCSI / ATAPI devices...
I 15:08:53 -> Drive 1 - Info: PLDS DVDRWBD DH-12E3S MD13 (D:) (ATAPI)
I 15:08:53 Found 1 BD-ROM/DVD±RW!
I 15:09:16 Operation Started!
I 15:09:16 Building Image Tree...
I 15:09:16 Checking Directory Depth...
I 15:09:16 Calculating Totals...
I 15:09:16 Preparing Image...
I 15:09:40 Using Layer Break LBA: 1150759 -> 1282512 (VTS_01, PGC: 1, Chapter: 13, Cell: 13, Vob/Cell ID: 1/13, Time: 01:04:06, SPLIP: Yes)
I 15:09:40 Checking Path Length...
I 15:09:40 Contents: 9 Files, 2 Folders
I 15:09:40 Content Type: DVD Video
I 15:09:40 Data Type: MODE1/2048
I 15:09:40 File System(s): ISO9660, UDF (1.02)
I 15:09:40 Volume Label: [Not Configured]
I 15:09:40 IFO/BUP 32K Padding: Enabled
I 15:09:40 Region Code: 1, 2, 3, 4, 5, 6, 7, 8
I 15:09:40 TV System: PAL
I 15:09:40 Size: 4,982,714,368 bytes
I 15:09:40 Sectors: 2,432,966
I 15:09:40 Image Size: 5,253,169,152 bytes
I 15:09:40 Image Sectors: 2,565,024
I 15:09:40 Operation Successfully Completed! - Duration: 00:00:23
I 15:09:43 Operation Started!
I 15:09:43 Building Image Tree...
I 15:09:47 Checking Directory Depth...
I 15:09:47 Calculating Totals...
I 15:09:47 Preparing Image...
I 15:11:04 Using Layer Break LBA: 1150759 -> 1282512 (VTS_01, PGC: 1, Chapter: 13, Cell: 13, Vob/Cell ID: 1/13, Time: 01:04:06, SPLIP: Yes)
I 15:11:04 Checking Path Length...
I 15:11:04 Contents: 9 Files, 2 Folders
I 15:11:04 Content Type: DVD Video
I 15:11:04 Data Type: MODE1/2048
I 15:11:04 File System(s): ISO9660, UDF (1.02)
I 15:11:04 Volume Label: [Not Configured]
I 15:11:04 IFO/BUP 32K Padding: Enabled
I 15:11:04 Region Code: 1, 2, 3, 4, 5, 6, 7, 8
I 15:11:04 TV System: PAL
I 15:11:04 Size: 4,982,714,368 bytes
I 15:11:04 Sectors: 2,432,966
I 15:11:04 Image Size: 5,253,169,152 bytes
I 15:11:04 Image Sectors: 2,565,024
I 15:11:36 Operation Successfully Completed! - Duration: 00:01:53
I 15:11:36 Operation Started!
I 15:11:36 Source File: -==/\/[BUILD IMAGE]\/\==-
I 15:11:36 Source File Sectors: 2,565,024 (MODE1/2048)
I 15:11:36 Source File Size: 5,253,169,152 bytes
I 15:11:36 Source File Volume Set Identifier: 4EDC793500272396
I 15:11:36 Source File Application Identifier: IMGBURN V2.5.8.0 - THE ULTIMATE IMAGE BURNER!
I 15:11:36 Source File Implementation Identifier: ImgBurn
I 15:11:36 Source File File System(s): ISO9660, UDF (1.02)
I 15:11:36 Destination Device: [0:1:0] PLDS DVDRWBD DH-12E3S MD13 (D:) (ATAPI)
I 15:11:36 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)
I 15:11:36 Destination Media Supported Write Speeds: 4x, 6x, 8x
I 15:11:36 Destination Media Sectors: 4,173,824
I 15:11:36 Destination Media L0 Data Zone Capacity: 2,086,912 (Changeable: Yes)
I 15:11:36 Write Mode: DVD
I 15:11:36 Write Type: DAO
I 15:11:36 Write Speed: 4x
I 15:11:36 DVD+R DL Reserve Track: No
I 15:11:36 Link Size: Auto
I 15:11:36 Lock Volume: Yes
I 15:11:36 Test Mode: No
I 15:11:36 OPC: No
I 15:11:36 BURN-Proof: Enabled
I 15:11:36 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)
I 15:11:36 Optimal L0 Data Zone Capacity: 1,282,512
I 15:11:36 Optimal L0 Data Zone Method: IFO Cell Boundary
I 15:11:58 Set L0 Data Zone Capacity Succeeded!
I 15:11:58 L0 Data Zone Capacity - Effective: 1,282,512
I 15:11:58 Filling Buffer... (80 MiB)
I 15:12:01 Writing LeadIn...
I 15:12:02 Writing Session 1 of 1... (1 Track, LBA: 0 - 2565023)
I 15:12:02 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2565023)
I 15:12:02 Writing Layer 0... (LBA: 0 - 1282511)
I 15:20:07 Writing Layer 1... (LBA: 1282512 - 2565023)
I 15:28:12 Synchronising Cache...
I 15:28:13 Closing Track...
I 15:28:14 Finalising Disc...
I 15:29:01 Exporting Graph Data...
I 15:29:01 Graph Data File: C:\Users\Ken\AppData\Roaming\ImgBurn\Graph Data Files\PLDS_DVDRWBD_DH-12E3S_MD13_FRIDAY-28-JUNE-2019_3-11_PM_MKM-003-00_4x.ibg
I 15:29:01 Export Successfully Completed!
I 15:29:01 Operation Successfully Completed! - Duration: 00:17:24
I 15:29:01 Average Write Rate: 5,288 KiB/s (3.9x) - Maximum Write Rate: 5,501 KiB/s (4.1x)
I 15:29:01 Cycling Tray before Verify...
W 15:29:08 Waiting for device to become ready...
I 15:29:17 Device Ready!
I 15:29:17 Operation Started!
I 15:29:17 Source Device: [0:1:0] PLDS DVDRWBD DH-12E3S MD13 (D:) (ATAPI)
I 15:29:17 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00)
I 15:29:17 Source Media Supported Read Speeds: 2x, 4x, 6x, 8x
I 15:29:17 Source Media Supported Write Speeds: 4x, 6x, 8x
I 15:29:17 Source Media Sectors: 2,565,024 (Track Path: OTP - L0: 1,282,512 - L1: 1,282,512)
I 15:29:17 Source Media Size: 5,253,169,152 bytes
I 15:29:17 Image File: -==/\/[BUILD IMAGE]\/\==-
I 15:29:17 Image File Sectors: 2,565,024 (MODE1/2048)
I 15:29:17 Image File Size: 5,253,169,152 bytes
I 15:29:17 Image File Volume Set Identifier: 4EDC793500272396
I 15:29:17 Image File Application Identifier: IMGBURN V2.5.8.0 - THE ULTIMATE IMAGE BURNER!
I 15:29:17 Image File Implementation Identifier: ImgBurn
I 15:29:17 Image File File System(s): ISO9660, UDF (1.02)
I 15:29:17 Read Speed (Data/Audio): MAX / MAX
I 15:29:18 Read Speed - Effective: 3.2x - 8x
I 15:29:18 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2565023)
I 15:29:18 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2565023)
I 15:29:18 Verifying Layer 0... (LBA: 0 - 1282511)
W 15:30:26 Failed to Read Sectors 120032 - 120063 - Reason: L-EC Uncorrectable Error
W 15:30:33 Failed to Read Sector 120048 - Reason: L-EC Uncorrectable Error
E 15:34:41 Failed to Read Sector 120048 - Reason: L-EC Uncorrectable Error
E 15:34:41 Failed to Verify Sectors!
I 15:34:43 Exporting Graph Data...
I 15:34:43 Graph Data File: C:\Users\Ken\AppData\Roaming\ImgBurn\Graph Data Files\PLDS_DVDRWBD_DH-12E3S_MD13_FRIDAY-28-JUNE-2019_3-11_PM_MKM-003-00_4x.ibg
I 15:34:43 Export Successfully Completed!
E 15:34:43 Operation Failed! - Duration: 00:05:23
I 15:34:43 Average Verify Rate: 745 KiB/s (0.6x) - Maximum Verify Rate: 4,993 KiB/s (3.7x)

Edited by efc1978

Share this post


Link to post
Share on other sites

My experience has been unless you get the same results 3 times in a row on known quality media, it's just a fluke.  It happens from time to time.  You get a few failures in a cake stack.  I've found the failure rate of Verbatim DVD+R DL is less than 1%.

Share this post


Link to post
Share on other sites
Posted (edited)

Oh no, I discovered last night at least 2 more DVD+RDL's I burned yesterday are having problems in my player.

One disc has a 1 second spot it goes silent for a second, another disc kind of freezes for a bit and my player makes an almost kind of grinding sound! - both these spots I found on 2 discs last night aren't even near the layer breaks which I origially thought were the issue. I'm having these problems with proper DVD-Audio discs burned with Cirlinca DVD-Audio, and also now normal DVD-Video I made with just the music I wanted with black video screen.... I haven't had any problems in 10 years, must be something to do specificaly with DVD+RDL with 24/96 audio on it. I cleaned the laser today with rubbing alcohol and cotton bud and the same issue is there... It doesn't happen with the discs in my PC or laptop drives or Blu-ray player from the quick tests I've done...

Any idea if it seems like a 'laser' problem in my player or more 'electronics' ? I see I can buy a supposedly brand new laser on eBay.

Edited by efc1978

Share this post


Link to post
Share on other sites
What you see in the video is me pressing skip ever few seconds to progress to the next track, then the 4th track change in the video at 11 seconds would be the first track after the layer break and you can hear the buzzing sound, does that give you any idea what the issue is?
This is happening with a bunch of DVD+RDL 24bit/96 discs I’ve burned this week, both DVD-Audio and DVD-Video.
Here’s the video I just put on my You Tube:
 

Share this post


Link to post
Share on other sites

If they play fine on your PC or laptop drive but have problems on your player connected to your TV, then the problem is your player.  Either it doesn't like those kind of DVD+R DL, particularly if you've never tried playing those before in it, or it's reached the end of its life.

 

What kind of DVD content you burn to the discs won't determine whether or not they can be played.  As long as they're DVD Video compliant, that's all that matters.  And if they're not, then all that will happen is nothing will play. 

 

Grinding noises are generally caused by an inability to read media.  And this can mean multiple things.  A bad disc, a disc with structural protection can sometimes do this, or a dying player.

Share this post


Link to post
Share on other sites

×

Important Information

By using this site, you agree to our Terms of Use.