Jump to content
Sign in to follow this  
markavelli

MDS File

Recommended Posts

So uh, like the software..i think. I've now made 20 coasters trying everything. Just read a post under "bugs" about the MDS file i get along with my ISO's. I have one partition out of 5 that is a fat32, i'm aware of the warning but still it didnt tell me that I shouldnt bother until I change to NTFS. I can't seem to make it work even when i take video files from my other partitions (ntfs). I've read all the guides carefully. The disks work on my computer but not on either of my dvd players (they are compatible with the dvd +r I'm using). I downloaded another free dvd maker, clicked a couple buttons and it made the disk perfectly...simple...but it took absolutely forever. Getting to the point, Is my ONE fat32 partition ruining it for me? It will be a pain changing it over, and really i don't want to, but i will if i have to. I know I'm doing everything else correctly, unless you guys see something in the text below...

 

 

appreciate your help.

 

 

 

I 18:29:55 Initialising SPTI...

I 18:29:55 Searching for SCSI / ATAPI devices...

I 18:29:55 Found 1 DVD-ROM and 1 DVD?RW!

I 18:33:07 Operation Started!

I 18:33:07 Source File: H:\Documents and Settings\Mack Waggy\My Documents\DVD Images\Another try, from back up\back up videos.mds

I 18:33:07 Source File Sectors: 308,704 (MODE1/2048)

I 18:33:07 Source File Size: 632,225,792 bytes

I 18:33:07 Source File Volume Identifier: this better work1

I 18:33:07 Source File Application Identifier: IMGBURN V2.2.0.0 - THE ULTIMATE IMAGE BURNER!

I 18:33:07 Source File Implementation Identifier: ImgBurn

I 18:33:07 Source File File System(s): ISO9660, UDF (1.02)

I 18:33:07 Destination Device: [0:0:0] DVDRW IDE1008 0060 (E:) (ATA)

I 18:33:07 Destination Media Type: DVD+R (Disc ID: CMC MAG-E01-00) (Speeds: 4x, 6x, 8x)

I 18:33:07 Destination Media Sectors: 2,295,104

I 18:33:07 Write Mode: DVD

I 18:33:07 Write Type: DAO

I 18:33:07 Write Speed: MAX

I 18:33:07 Link Size: Auto

I 18:33:07 Test Mode: No

I 18:33:07 BURN-Proof: Enabled

I 18:33:08 Filling Buffer... (40 MB)

I 18:33:08 Writing LeadIn...

I 18:33:48 Writing Image...

I 18:35:43 Synchronising Cache...

I 18:35:44 Closing Track...

I 18:35:46 Finalising Disc...

I 18:36:06 Image MD5: 897728e735693ab2aa426d0ca2bc3696

I 18:36:06 Operation Successfully Completed! - Duration: 00:02:58

I 18:36:06 Average Write Rate: 5,368 KB/s (3.9x) - Maximum Write Rate: 5,540 KB/s (4.0x)

I 18:36:06 Cycling Tray before Verify...

W 18:36:12 Waiting for device to become ready...

I 18:36:25 Device Ready!

I 18:36:25 Operation Started!

I 18:36:25 Source Device: [0:0:0] DVDRW IDE1008 0060 (E:) (ATA)

I 18:36:25 Source Media Type: DVD+R (Book Type: DVD+R) (Disc ID: CMC MAG-E01-00) (Speeds: 4x, 6x, 8x)

I 18:36:25 Image File: H:\Documents and Settings\Mack Waggy\My Documents\DVD Images\Another try, from back up\back up videos.mds

I 18:36:25 Image File Sectors: 308,704 (MODE1/2048)

I 18:36:25 Image File Size: 632,225,792 bytes

I 18:36:25 Image File Volume Identifier: this better work1

I 18:36:25 Image File Application Identifier: IMGBURN V2.2.0.0 - THE ULTIMATE IMAGE BURNER!

I 18:36:25 Image File Implementation Identifier: ImgBurn

I 18:36:25 Image File File System(s): ISO9660, UDF (1.02)

I 18:36:25 Verifying Sectors... (LBA: 0 - 308703)

I 18:39:02 Device MD5: 897728e735693ab2aa426d0ca2bc3696

I 18:39:02 Image MD5: 897728e735693ab2aa426d0ca2bc3696

I 18:39:02 Operation Successfully Completed! - Duration: 00:02:37

I 18:39:02 Average Verify Rate: 3,932 KB/s (2.8x) - Maximum Verify Rate: 4,591 KB/s (3.3x)

Share this post


Link to post
Share on other sites

I reinstalled Imgburn on a ntsf partition and I still get MDS files along with my iso's, even though I'm making an image of files taken from an ntfs partition.

Edited by markavelli

Share this post


Link to post
Share on other sites
I 18:33:07 Destination Media Type: DVD+R (Disc ID: CMC MAG-E01-00) (Speeds: 4x, 6x, 8x)

Right or wrong partition, you'll make 200 more coasters if you keep using this rubbish. Change to Taiyo Yudens or Verbatims.

 

Regards

Share this post


Link to post
Share on other sites

You're making a 600mb DVD Video disc?!

 

I'm guessing you actually just have an AVI file rather than a VIDEO_TS folder - no wonder it doesn't work.

 

The other app would have perhaps converted it to DVD Video, ImgBurn is just a burning tool and doesn't convert anything.

 

FAT32 is not a problem at all. ImgBurn automatically handles everything it needs to regarding that.

Share this post


Link to post
Share on other sites

I have never had any problems using FAT32 either, Always does as it's supposed to, Your disc's are not very good as pointed out, also you need dvd compliant files to burn to dvd and have it playback in a standard dvd player.

Share this post


Link to post
Share on other sites

Try this one: VSO DIVXTODVD Converter The bottom one of the three is the freeware version and the one I use, I think it was Shamus who pointed me towards it in the first place so credit to him.

Share this post


Link to post
Share on other sites
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.