All Activity

The good news that's not "sparking" but I figured you probably were aware of that. That sounds more like the laser having difficulty switching between the layers. Actually, another possibility is it's not a BD-R/RE DL layer on the other side. It could be one of those single layer 33.3 GB BD layers. Triple layer BD's use layers that are 33.3 GB each. (So, yes, technically 100 GB TL discs are not 100 GB but 99.9 GB.)

34 GB is a double layer Blu-Ray or HD DVD. The fact that Windows asks if you want to format it as a giant floppy (Packet writing.) indicates it's a BD-R DL or BD-RE DL layer. A BD drive wouldn't be able to read anything from an HD DVD layer. However, it is practically unheard of to create CD-R flippers with a CD-R on one side and a BD-R/RE DL on the other.

https://voca.ro/1jzTcXTnZ6aS https://voca.ro/11tR9HeeAqoV

If you've got a CD with a branded surface, like those CD-RW's in your other post, you could try putting one of those in your drive with the label side down and see how ImgBurn behaves. See what it returns. See if it returns a Logical Unit Not Ready - Cause Not Reportable error. (I've never seen that 2nd part before.)

Omg it loaded after like 5 minutes. Windows asking if I want to use as USB flash drive or in a cd dvd player. only the usb flash drive option is available. When I confirm the USB flash drive option, it says the disc is write protected. ImgBurn says: Disc Information: Status: Unknown State of Last Session: Unknown Erasable: Unknown Formatted: Unknown Sessions: Unknown Sectors: 16 777 216 Size: 34 359 738 368 bytes Time: 3728:18:16 (MM:SS:FF) Also I hear sparking sounds from the drive.

Yes i can hear that it spins and the laser moving around and trying to do something for about minute and half. Then the led stops blinking and it spins down. ImgBurn says Logical Unit not ready, Cause not reportable. After that it spins up again and tries again to read the disc and it continues like this on and on.

It's always possible. I've never seen such a thing and I can't see much use in producing one because people might be confused which side you're supposed to put face down into a device. Plus, given that the drive tries to do something to it as opposed to just returning no disc in the device indicates the other layer has a surface for a laser to pass through, indicating the layer is intended to be read.

Can it be just a CD without a label? That's what I was told it most likely is elsewhere.

Yeah, when you're a new member, you're limited in the # of posts you can initially make to 5 a day. This deters potential spammers. After a few days, you should have unlimited posting privileges. The different colored layer lends credence to my theory it's an HD DVD layer. Also the BD drive being unable to read it makes me think that, but it's virtually unheard of for a CD-R to have an HD DVD or Blu-Ray layer on its flipper side. Maybe it's a weird hybrid CD where one side is a CD-R and the other is a Super CD or something like that. Super CD were closer to DVD's but I'm not entirely sure DVD drives can read Super CD.

This is my last reply I can make today. The side that does read has a little bit different look. When I look at the reflection in it it has more of a pink tint. Edit: nevermind. Seems like the limit increased.

On the CD-R layer yes its an Audio CD. I tried in my bluray drive which does not support HD DVD

Hm, well, that was unexpected. Normally, flippers for CD's were reserved for Audio CD layers on one side and a DVD Video layer on the other for music videos or assorted data files. It's decidedly unusual for a CD-R flipper to exist. Those would normally be recordable CD layers on each side. About the only thing I can think of is the other layer is a CD-R side that hasn't been recorded yet, but the fact it attempts to find a track indicates there is something recorded on that layer that the drive can't read. It would be unheard of, IMO, for a CD flipper to have a CD-R on one side and an HD DVD layer on the other. What's on the CD-R layer? What happens when you try to open that side in Windows? Is it an Audio CD? Does it attempt to play as an Audio CD or does File Explorer open a folder?

ImgBurn says its a CD-R MID: 97m27s28f (Princo Corp.) I do have a bluray drive.

If it's an HD DVD layer, then a BD drive or Blu-Ray player won't read it.

Yeah, I agree with what dbminter said. If you have a Blu-Ray Player, you should try and play the content from both sides of the disc and see what happens @Tobim6 Since if it's a DVD with a HD-DVD or Blu-Ray side, it should run it's content on a Blu-Ray Player (probably), that would at least confirm that the driver you're using to read the disc with isn't correctly equipped with the features needed to do what you want (which is to make a backup of the disc I guess, considering how scratched it is) 😅

What does ImgBurn say the one side you can read is? It would say in the Log, probably, or, at least, the pane of disc info on the right hand side. If I had to hazard a guess, this is a dual format flipper. One side is a DVD Video layer and the other side is an HD DVD or Blu-Ray. Probably an HD DVD side since your drive can't apparently read from it. I know there was one Star Trek original series complete series release that had DVD layers on one side and HD DVD layers on the other.

Hello what is this disc it reads only from one side and on the other side it tries really hard to find a track for like 2 minutes.

So sad that this thread is incomplete because you can do only 5 replies per day

Yeah, Verify speeds on BD-R are stupid. While I've rarely seen 2x, I have seen some that start at 3x and then cap out at 4. And it is entirely random. Sometimes you get really good Verify speeds that start at 5x and then sometimes you get really slow ones.

So I burnt about 50 BD-Rs (some burnt via my Bravo SE and some via my Pioneer X12), done last week, and when I verify each one (separately later using the verify vs ISO option in IMGBurn, so not directly after burn), some will verify at full speed, but many only verify at 2.0x speed, why would this be ? Seems odd that it sticks at 2.0x for the entire verify, but not on all of them, it is about 50/50 on which ones will verify at 2x. All verifying done via my Pioneer X12 using USB3. Also, I notice the PTRobot DLL files are newer on the official Primera website to the ones in the support page here that I am using, can I just copy the newer ones from the Primera website to my IMGBurn folder, or are the ones on this forum specially modified for IMGBurn ? Thanks.

I just burned that image to a Memorex 24x Ultra High Speed Mitsubishi CD-RW without any errors. However, there were Verify miscompares: I 13:34:24 Operation Started! I 13:34:24 Source File Sectors: 237,275 (MODE1/2352) I 13:34:24 Source File Size: 558,070,800 bytes I 13:34:24 Source File File System(s): ISO9660, Joliet I 13:34:24 Destination Device: [0:0:0] ASUS BW-16D1HT 3.11 (R:) (USB 3.0) I 13:34:24 Destination Media Type: CD-RW (Disc ID: 97m34s24f, Mitsubishi Chemical Corp.) I 13:34:24 Destination Media Supported Write Speeds: 16x, 24x I 13:34:24 Destination Media Sectors: 359,847 I 13:34:24 Write Mode: CD I 13:34:24 Write Type: SAO I 13:34:24 Write Speed: MAX I 13:34:24 Lock Volume: Yes I 13:34:24 Test Mode: No I 13:34:24 OPC: No I 13:34:24 BURN-Proof: Enabled I 13:34:24 Write Speed Successfully Set! - Effective: 4,234 KB/s (24x) I 13:34:24 Filling Buffer... (40 MiB) I 13:34:24 Writing LeadIn... I 13:34:41 Writing Session 1 of 4... (1 Track, LBA: 0 - 83374) I 13:34:41 Writing Track 1 of 1... (MODE1/2352, LBA: 0 - 83374) I 13:35:49 Synchronising Cache... I 13:36:01 Filling Buffer... (40 MiB) I 13:36:01 Writing LeadIn... I 13:36:06 Writing Session 2 of 4... (1 Track, LBA: 94775 - 117377) I 13:36:06 Writing Track 1 of 1... (MODE1/2352, LBA: 94775 - 117377) I 13:36:18 Synchronising Cache... I 13:36:25 Filling Buffer... (40 MiB) I 13:36:25 Writing LeadIn... I 13:36:29 Writing Session 3 of 4... (1 Track, LBA: 124278 - 230074) I 13:36:29 Writing Track 1 of 1... (MODE1/2352, LBA: 124278 - 230074) I 13:37:27 Synchronising Cache... I 13:37:33 Filling Buffer... (40 MiB) I 13:37:33 Writing LeadIn... I 13:37:33 Writing Session 4 of 4... (1 Track, LBA: 236975 - 237274) I 13:37:34 Writing Track 1 of 1... (MODE2/FORM1/2352, LBA: 236975 - 237274) I 13:37:34 Synchronising Cache... I 13:37:45 Operation Successfully Completed! - Duration: 00:03:20 I 13:37:45 Average Write Rate: 3,162 KiB/s (18.4x) - Maximum Write Rate: 4,200 KiB/s (24.4x) I 13:37:45 Cycling Tray before Verify... W 13:37:58 Waiting for device to become ready... I 13:38:09 Device Ready! I 13:38:10 Operation Started! I 13:38:10 Source Device: [0:0:0] ASUS BW-16D1HT 3.11 (R:) (USB 3.0) I 13:38:11 Source Media Type: CD-RW (Disc ID: 97m34s24f, Mitsubishi Chemical Corp.) I 13:38:11 Source Media Supported Read Speeds: 4x, 8x, 10x, 16x, 24x, 32x, 40x I 13:38:11 Source Media Supported Write Speeds: 16x, 24x I 13:38:11 Source Media Sectors: 237,275 I 13:38:11 Source Media Size: 485,939,200 bytes I 13:38:11 Image File Sectors: 237,275 (MODE1/2352) I 13:38:11 Image File Size: 558,070,800 bytes I 13:38:11 Image File Volume Identifier: NEW I 13:38:11 Image File Volume Set Identifier: NEW I 13:38:11 Image File File System(s): ISO9660, Joliet I 13:38:11 Read Speed (Data/Audio): MAX / MAX I 13:38:13 Read Speed - Effective: 40x I 13:38:13 Verifying Session 1 of 4... (1 Track, LBA: 0 - 83374) I 13:38:13 Verifying Track 1 of 1... (MODE1/2352, LBA: 0 - 83374) W 13:39:26 Miscompare at LBA: 83373, Offset: 2064 W 13:39:26 Device: 0xAC W 13:39:26 Image File: 0x00 W 13:39:26 Total Errors in Sector: 52 W 13:39:26 Note: The drive probably corrected the EDC Area because it's wrong in the image file. I 13:39:26 Verifying Sectors... W 13:39:27 Miscompare at LBA: 83374, Offset: 2064 W 13:39:27 Device: 0x3D W 13:39:27 Image File: 0x00 W 13:39:27 Total Errors in Sector: 52 W 13:39:27 Note: The drive probably corrected the EDC Area because it's wrong in the image file. I 13:39:27 Verifying Sectors... I 13:39:27 Verifying Session 2 of 4... (1 Track, LBA: 94775 - 117377) I 13:39:27 Verifying Track 1 of 1... (MODE1/2352, LBA: 94775 - 117377) W 13:39:48 Miscompare at LBA: 117376, Offset: 2064 W 13:39:48 Device: 0x8D W 13:39:48 Image File: 0x00 W 13:39:48 Total Errors in Sector: 52 W 13:39:48 Note: The drive probably corrected the EDC Area because it's wrong in the image file. I 13:39:48 Verifying Sectors... W 13:39:48 Miscompare at LBA: 117377, Offset: 2064 W 13:39:48 Device: 0x3E W 13:39:48 Image File: 0x00 W 13:39:48 Total Errors in Sector: 52 W 13:39:48 Note: The drive probably corrected the EDC Area because it's wrong in the image file. I 13:39:48 Verifying Sectors... I 13:39:48 Verifying Session 3 of 4... (1 Track, LBA: 124278 - 230074) I 13:39:48 Verifying Track 1 of 1... (MODE1/2352, LBA: 124278 - 230074) W 13:40:34 Miscompare at LBA: 230073, Offset: 2064 W 13:40:34 Device: 0xF3 W 13:40:34 Image File: 0x00 W 13:40:34 Total Errors in Sector: 52 W 13:40:34 Note: The drive probably corrected the EDC Area because it's wrong in the image file. I 13:40:37 Verifying Sectors... W 13:40:38 Miscompare at LBA: 230074, Offset: 2064 W 13:40:38 Device: 0x62 W 13:40:38 Image File: 0x00 W 13:40:38 Total Errors in Sector: 52 W 13:40:38 Note: The drive probably corrected the EDC Area because it's wrong in the image file. I 13:40:38 Verifying Sectors... I 13:40:38 Verifying Session 4 of 4... (1 Track, LBA: 236975 - 237274) I 13:40:38 Verifying Track 1 of 1... (MODE2/FORM1/2352, LBA: 236975 - 237274) I 13:40:43 Operation Successfully Completed! - Duration: 00:02:27 I 13:40:43 Average Verify Rate: 3,758 KiB/s (21.8x) - Maximum Verify Rate: 11,969 KiB/s (69.5x)

The image can partially be burnt to DVD+RW. ImgBurn says it will do some conversions on the fly, but I'll retry on a CD-RW. I spoke with the OP via private message and they already tried Virtual CloneDrive per my suggestion. It's only displaying partial data, most likely from only one Session, either Session 1 or 4.

That sort of image can only be burnt to a cd. it looks like a data disc you’ve kept adding data too. put the disc in the drive and use Build mode to make a clean image from it. mount hat new image in a virtual drive program to check its all ok and then burn to a new disc.

I think @LIGHTNING UK! may have to chime in on this. I got a next writable address invalid message while attempting to write Session 1. Does ImgBurn support multiple Sessions? I seem to recall at one point in the past that it did not support multiple Sessions. Here's what I got attempting to write the image to a DVD+RW: --------------------------- ImgBurn --------------------------- Next Writable Address is Invalid! LBA: 83375 / 18:33:50 NWA: 0 / 00:02:00 --------------------------- OK --------------------------- As another test, I attempted to burn this image to a DVD+RW as I said above and got a message saying the Image track format was MODE1/2352 but the Image track format for DVD is MODE1/2048. I'm no expert but an odd format value of 2352 seems to just be wrong to me. I have to wonder if the image is incorrect somehow. --------------------------- ImgBurn --------------------------- Your image doesn't appear to be of the correct format for burning onto a DVD. Session 1, Track 1 Image track format: MODE1/2352 DVD track format: MODE1/2048 Would you like the program to convert the data to the correct format 'on-the-fly' as it is written? Note: The actual image file is not changed. --------------------------- Yes No --------------------------- I 08:52:31 Source File Sectors: 237,275 (MODE1/2352) I 08:52:31 Source File Size: 558,070,800 bytes I 08:52:31 Source File File System(s): ISO9660, Joliet I 08:52:31 Write Mode: DVD I 08:52:31 Write Type: DAO I 08:52:31 Write Speed: MAX I 08:52:31 Link Size: Auto I 08:52:31 Lock Volume: Yes I 08:52:31 Test Mode: No I 08:52:31 OPC: No I 08:52:31 BURN-Proof: Enabled I 08:52:34 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x) I 08:52:34 Filling Buffer... (40 MiB) I 08:52:34 Writing LeadIn... I 08:52:40 Writing Session 1 of 4... (1 Track, LBA: 0 - 83374) I 08:52:40 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 83374) I 08:53:00 Synchronising Cache... I 08:53:03 Closing Session... E 08:53:04 Next Writable Address is Invalid! E 08:53:04 LBA: 83375 / 18:33:50 E 08:53:04 NWA: 0 / 00:02:00 E 08:54:46 Failed to Write Image! E 08:54:49 Operation Failed! - Duration: 00:02:14