Jump to content
Sign in to follow this  
dr_ml422

Piioneer 112D Burning at 1.2 x?

Recommended Posts

Here's the log. Hope it helps. I had it set to aotomatic write speed at 12x and it was giving me 1.2x. Using Verbatims DVD+R's 16x. Thnx.

 

; //****************************************\\

; ImgBurn Version 2.5.0.0 - Log

; Thursday, 03 September 2009, 16:06:16

; \\****************************************//

;

;

I 15:30:14 ImgBurn Version 2.5.0.0 started!

I 15:30:14 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3)

I 15:30:14 Total Physical Memory: 2,086,988 KB - Available: 1,800,060 KB

W 15:30:14 DVD43 can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled!

I 15:30:14 Initialising SPTI...

I 15:30:14 Searching for SCSI / ATAPI devices...

I 15:30:14 Found 1 DVD

Share this post


Link to post
Share on other sites

Hi eskro. My drivers are blown out of my burners. I tried uninstalling and then restarting, but I get a message saying that windows can't find/install the drivers for my burners. Where would I go for that? I know about firmware but not drivers. Thnx.

 

I 17:08:12 ImgBurn Version 2.5.0.0 started!

I 17:08:12 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3)

I 17:08:12 Total Physical Memory: 2,086,988 KB - Available: 1,702,956 KB

I 17:08:12 Initialising SPTI...

I 17:08:12 Searching for SCSI / ATAPI devices...

W 17:08:12 No devices detected!

Share this post


Link to post
Share on other sites

You don't need drivers for your drives.

 

Have the controllers gone back in ok if you look in Device manager?

 

What chipset is your board running and which chipset are your drives connected to (if not the main one) ?

Share this post


Link to post
Share on other sites

Lightning the chipset is Intel® 82915G/GV/910GL/Express Chipset Family. When I click on my burners in device manager it tells me it can't load them, that they may be corrupt or missing (code 39). I burned some discs earlier. Idk what happened. I can't find where to go to find what chipset the drives are connected to? Is there a setting somewhere in device manager other than clicking on the drive's properties?

Share this post


Link to post
Share on other sites

Try uninstalling the controllers again.

 

The issue could be down to a bad filter driver or something blocking them from working properly.

 

Care to post the list? (look in the Tools menu).

 

You can get the latest intel chipset drivers from here:

 

http://www.intel.com/support/chipsets/inf/

 

and the intel matrix driver from here - although I'm not sure if it'll install on your pc.

 

http://www.intel.com/support/chipsets/imsm/

Share this post


Link to post
Share on other sites

Yup. That pos DVD43 which was something ages ago was in there as a filter. I removed it from the list in ImgBurn. I don't mind doing a clean install, but I really didn't feel like it. Thnx. Lightning. I'll just stick to the new usual suspects for my backup/copying endeavors. :thumbup:

 

Any issues I'll just post back.

Share this post


Link to post
Share on other sites
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.