Jump to content

creating a *.iso from a DVD-R disc

Recommended Posts

I started using DVD-R discs after using DVD+R.

I created a DVD from a Phillips hdd & dvd recorder (dvdr3575h). I then read and try to write a ,iso file of the disc to a hard drive as backup. With the verbatim dvd+r, I have the option to create the .iso image. With the verbatim dvd-r, the destination file is a .bin file, but it also tells me:

I am unable to change the .bin to a .iso.

Any insights?

HL-DT-ST BD-RE  WH16NS40 1.02 (USB)
Current Profile: DVD-ROM

Disc Information:
Status: Complete
State of Last Session: Complete
Erasable: No
Sessions: 1
Sectors: 2,095,920
Size: 4,292,444,160 bytes
Time: 465:47:45 (MM:SS:FF)
Supported Read Speeds: 2x, 4x, 6.3x, 8.3x, 10.3x, 12.1x
Current Read Speed: 2.6x - 6.3x

TOC Information:
Session 1... (LBA: 0)
-> Track 01  (Mode 1, LBA: 0 - 2095919)
-> LeadOut  (LBA: 2095920)

Track Information:
Session 1...
-> Track 01 (LTSA: 0, LTS: 15872, LRA: 15871)
-> Track 02 (LTSA: 15888, LTS: 1040816, LRA: 1056703)
-> Track 03 (LTSA: 1056720, LTS: 1039168, LRA: 2095887)
-> Track 04 (LTSA: 2095904, LTS: 16, LRA: 2095919)

Pre-recorded Information:
Manufacturer ID: CMC MAG. AM3

Recording Management Area Information:

Physical Format Information (Last Recorded):
Disc ID: 0@P-!-00
Book Type: DVD-R
Part Version: 5
Disc Size: 120 mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 2,292,527
Last Physical Sector in Layer 0: 0



Share this post

Link to post
Share on other sites

You’ll have to do as it says.

Go into build mode, change the output to image file, put the drive letter of your optical drive in the source box (D:\ or whatever) and then build your new image.

Share this post

Link to post
Share on other sites

This is, unfortunately, necessary to copy all DVD's made by a DVD Video Recorder in ImgBurn.  ImgBurn will not read those discs because they're created with multiple tracks, which ImgBurn doesn't support.  Every time you record a title on a DVD Video Recorder, the recorder creates a new track for each title.

Share this post

Link to post
Share on other sites


Important Information

By using this site, you agree to our Terms of Use.