dr_ml422 Posted April 29, 2009 Share Posted April 29, 2009 Hi guys. I've set the auto write speed to 12x on my TY's. It keeps them on 24x which is impossible as TY's don't do 24x. The DVD-R's that is. Here's a log to see if you see something I can't. Checked forum but no answer to this that I saw. Thnx. //****************************************\\ ; ImgBurn Version 2.4.4.0 - Log ; Wednesday, 29 April 2009, 14:31:06 ; \\****************************************// ; ; I 14:11:33 ImgBurn Version 2.4.4.0 started! I 14:11:33 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 14:11:33 Total Physical Memory: 2,095,532 KB - Available: 1,736,464 KB I 14:11:33 Initialising SPTI... I 14:11:33 Searching for SCSI / ATAPI devices... I 14:11:33 Found 2 DVD Link to comment Share on other sites More sharing options...
cornholio7 Posted April 29, 2009 Share Posted April 29, 2009 are you choosing AWS when you burn? Link to comment Share on other sites More sharing options...
dr_ml422 Posted April 29, 2009 Author Share Posted April 29, 2009 are you choosing AWS when you burn? Son of a Gun. I could of sworn I went through that drop down list. Thnx cornholio. I guess Imgburn also saved me from creating a coaster w/its option for that? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted April 29, 2009 Share Posted April 29, 2009 You could set it to 50 million, the drive will still only burn at 12x. You can't make a drive do something it knows it can't support, it'll just think you (well, ImgBurn) are stupid and go with the closest speed it *does* support.. Link to comment Share on other sites More sharing options...
eSkRo Posted April 29, 2009 Share Posted April 29, 2009 can you set the AWS to 12x so that any brand/type of media inserted in your drive will be burned at that speed? or you have to edit each media type 1 by 1...? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted April 29, 2009 Share Posted April 29, 2009 if you add the drive name rather than the media id, yes. Likewise, you can add 'DVD-R' and it'll burn all DVD-R (that aren't otherwise specified) at whatever speed you select. Link to comment Share on other sites More sharing options...
dr_ml422 Posted April 29, 2009 Author Share Posted April 29, 2009 I didn't know about adding the DVD+-R Option. In same window as where you add the drive name? It's good to have that when burning w/same quality media/burner, but if different then individual settings better. ie: Sata Sammys are slow at lead in and usually end up at or close to your write speed. So I set sometimes to 16x to get 12x. Pioneer though goes straight to rate and stays there. I like that about the Pionerr derives. Link to comment Share on other sites More sharing options...
eSkRo Posted April 30, 2009 Share Posted April 30, 2009 in my opinion, Pioneers are top noch!!! Link to comment Share on other sites More sharing options...
eSkRo Posted April 30, 2009 Share Posted April 30, 2009 if you add the drive name rather than the media id, yes. Likewise, you can add 'DVD-R' and it'll burn all DVD-R (that aren't otherwise specified) at whatever speed you select. uhm, where should i put the drive name exactly? Link to comment Share on other sites More sharing options...
dr_ml422 Posted April 30, 2009 Author Share Posted April 30, 2009 (edited) in my opinion, Pioneers are top noch!!! I have to admit I do like that about them also. They do run into some firmware issues now and then, but I'll say they're pretty solid. The Sammy's are good too. Oh btw. In AWS just click on the drive it'll be listed and hit update. Do the same for the write rate. There you could also do what Lightning suggested. It's pretty much autopilot ImgBurn is. Not that much one needs to play with to use it best. Edited April 30, 2009 by dr_ml422 Link to comment Share on other sites More sharing options...
Cynthia Posted April 30, 2009 Share Posted April 30, 2009 . Link to comment Share on other sites More sharing options...
mmalves Posted April 30, 2009 Share Posted April 30, 2009 , Link to comment Share on other sites More sharing options...
dr_ml422 Posted April 30, 2009 Author Share Posted April 30, 2009 . Hi Cynthia. I think they're all updated. I'm planning a trip to Europe. One of my yets. Link to comment Share on other sites More sharing options...
Recommended Posts