Jump to content

Recommended Posts

Posted (edited)

I'm past the rootkits on my drives, I had one successful burn with Gran Torino, after that I did Tales of the Past 3, but it seemed to cut off an inch on the movie, then I did Jurassic park for my sister and the entire screen is pushed down so I only get half the picture. Could this be a new rootkit?

 

Also for some reason after the first successful burn the Drive seems to stop after Buffering, then I press eject and it starts going again, and then every time I open it the tray spits out with the DvD spinning on it

Edited by Grave Doren'kal
Posted

No, this sounds like an issue with your source files (and any conversion you might be doing).

 

If it burns and verifies ok, you need to look elsewhere for the cause of the problem.

Posted

Also look for the latest firmware for your burner (right-click the drive in ImgBurn and you'll see the option ;) ).

Posted
Well, I was hasty with the first post, it turns out the DvD is fine, it works on the 2 smaller players in my room and another room, but it won't work on the bigger main TV

 

which app u use to convert to DVD ?

Posted

You should give a different conversion program a go.

 

Perhaps try DVD Flick or ConvertXtoDVD and make sure you tell it to output files in either NTSC or PAL format - whichever applies to where you live.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.