lespaul5895 Posted July 24, 2009 Share Posted July 24, 2009 (edited) For some reason when I set imgburn to burn on my drive at 2.4x on dual layer disks it will just run at max speed. I have an LG GH22NS30 Burner and am confused as to why it constantly runs at max speed. The reason this is causing me problems is that it's causing wavy lines on my verbatim media and not allowing it to be read in anything properly. ; //****************************************\\ ; ImgBurn Version 2.4.4.0 - Log ; Friday, 24 July 2009, 00:21:02 ; \\****************************************// ; ; I 23:54:01 ImgBurn Version 2.4.4.0 started! I 23:54:01 Microsoft Windows Vista Ultimate x64 Edition (6.0, Build 6001 : Service Pack 1) I 23:54:01 Total Physical Memory: 4,192,632 KB - Available: 3,026,060 KB I 23:54:01 Initialising SPTI... I 23:54:01 Searching for SCSI / ATAPI devices... I 23:54:01 Found 1 DVD Edited July 24, 2009 by lespaul5895 Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted July 24, 2009 Share Posted July 24, 2009 I 23:54:52 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 4x) Your drive/firmware only supports that media at 4x. Verify your burns. Link to comment Share on other sites More sharing options...
Recommended Posts