nothing displays on disc after burn

[WT03]

i've been trying desperetly for the past 2 weeks to burn an ISO img file to dvd-r disc. on windows Vista. Imgburn 2.5 always says the burn is successfull with no errors in the log, but when I try & read the disc, it's blank. 0 free space. I've tried the disc on different machines, and rebooted windows. Can't read the disc. I am using good quality verbatim discs, burning at 4.x speed. already went through about 10 of these expensive little hummers... I'm doing a new fresh burn now so you have an updated log... The device is a HL-DT-ST DVDRAM GSA T20N. I've checked the driver update, but windows says I already have the latest version. I've checked the firmware vrs through imgburn and there is an update.. imgburn says I have version WT03, there is a version WY04 for my LG-GSA-T20N. I downloaded the file, but when I run the exe, it can't find the target drive. I've tried our other 3 computers, but none of them support recording on DVD-R discs.

 

--- Log File ----

I 06:49:32 Operation Started!

I 06:49:32 Source File: C:\Users\Family\Downloads\Monopoly_USA_WII-VORTEX\vortex-mnp.iso

I 06:49:32 Source File Sectors: 2,294,912 (MODE1/2048)

I 06:49:32 Source File Size: 4,699,979,776 bytes

I 06:49:32 Source File Volume Identifier: Monopoly

I 06:49:32 Source File File System(s): Special

I 06:49:32 Destination Device: [1:0:0] HL-DT-ST DVDRAM GSA-T20N WT03 (E:) (ATA)

I 06:49:32 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 4x, 8x)

I 06:49:32 Destination Media Sectors: 2,297,888

I 06:49:32 Write Mode: DVD

I 06:49:32 Write Type: DAO

I 06:49:32 Write Speed: 4x

I 06:49:32 Link Size: Auto

I 06:49:32 Lock Volume: Yes

I 06:49:32 Test Mode: No

I 06:49:32 OPC: No

I 06:49:32 BURN-Proof: Enabled

I 06:49:32 Filling Buffer... (40 MB)

I 06:49:33 Writing LeadIn...

I 06:50:21 Writing Session 1 of 1... (1 Track, LBA: 0 - 2294911)

I 06:50:21 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2294911)

I 07:04:47 Synchronising Cache...

I 07:04:57 Exporting Graph Data...

I 07:04:57 Graph Data File: C:\Users\Family\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GSA-T20N_WT03_AUGUST-13-09_6-49_AM_MCC_03RG20_4x.ibg

I 07:04:57 Export Successfully Completed!

I 07:04:57 Operation Successfully Completed! - Duration: 00:15:24

I 07:04:57 Average Write Rate: 5,306 KB/s (3.8x) - Maximum Write Rate: 5,625 KB/s (4.1x)

I 07:04:57 Cycling Tray before Verify...

W 07:05:05 Waiting for device to become ready...

I 07:05:19 Device Ready!

I 07:05:21 Operation Started!

I 07:05:22 Source Device: [1:0:0] HL-DT-ST DVDRAM GSA-T20N WT03 (E:) (ATA)

I 07:05:22 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: MCC 03RG20) (Speeds: 4x, 8x)

I 07:05:22 Image File: C:\Users\Family\Downloads\Monopoly_USA_WII-VORTEX\vortex-mnp.iso

I 07:05:22 Image File Sectors: 2,294,912 (MODE1/2048)

I 07:05:22 Image File Size: 4,699,979,776 bytes

I 07:05:22 Image File Volume Identifier: Monopoly

I 07:05:22 Image File File System(s): Special

I 07:05:22 Read Speed (Data/Audio): MAX / MAX

I 07:05:22 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2294911)

I 07:05:22 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2294911)

I 07:15:06 Exporting Graph Data...

I 07:15:06 Graph Data File: C:\Users\Family\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GSA-T20N_WT03_AUGUST-13-09_6-49_AM_MCC_03RG20_4x.ibg

I 07:15:06 Export Successfully Completed!

I 07:15:06 Operation Successfully Completed! - Duration: 00:09:44

I 07:15:06 Average Verify Rate: 7,859 KB/s (5.7x) - Maximum Verify Rate: 11,391 KB/s (8.2x)

----end ----

 

Now, the log didn't say anything that it closed the disc... So I do it manually:

Close Track

Close Session - I/O ERROR

 

Device: [1:0:0] HL-DT-ST-DVDRAM GSA T20N WT03 (E:) (ATA)

 

SCSI Status 0x02

Interpretation: Check Condition

 

CDB: 5B 00 02 00 00 00 00 00 00 00

Interpretation: Close Track / Session

 

Sense Area: 70 00 05 00 00 00 00 0A 5B 00 00 0C 72 03 00 00 00 00

Interpretation: Session Fixation Error - Incomplete track in session

 

Close Disc - Same errors as above except for the Sense Area

 

Sense Area: 70 00 05 00 00 00 00 0A 5B 05 00 0C 24 00 00 C0 00 02

Interpretation: Invalid Field in CDB

 

 

 

So that's it, can't read the disc...

Any help is appreciated, but please, just real help... I have already tried all the basic stuff I know of, as you can see. Thank you.

[LIGHTNING UK!]

It burnt and verified fine so there is no problem with the disc.

 

Your PC's won't be able to view the contents, it's a WII disc after all!

[WT03]

that's right, it is.. I'm trying to do backup of one of our games.... But it doesn't even work in the wii machine...

[mmalves]

I'm sorry but we can't help if it isn't an ImgBurn issue

[WT03]

Thanks, actually you did help me quite a bit, and it's greatly appreciated. Everyone was telling me I'd be able to read the disc after it's been burnt.. As I always say, need the right answer, go to the simplest source. After all this time & discs, I finally got the disc burn working... Thanks again!

[mmalves]