awoodhall2003 Posted August 30, 2009 Posted August 30, 2009 I have tried backing up a 360 game, it seemed to write fine but then on verification it had read errors. I am using verbatims on a Optiarc AD-7170S Drive it was on 1.0 firmware, but just retrying the burn as ive just updated it to 1.3. Any help would be appreciated, here is the log: ; //****************************************\\; ImgBurn Version 2.5.0.0 - Log ; Sunday, 23 August 2009, 13:42:08 ; \\****************************************// ; ; I 12:39:23 ImgBurn Version 2.5.0.0 started! I 12:39:23 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7100) I 12:39:23 Total Physical Memory: 3,275,960 KB - Available: 2,151,328 KB I 12:39:23 Initialising SPTI... I 12:39:23 Searching for SCSI / ATAPI devices... I 12:39:23 Found 1 DVD
LIGHTNING UK! Posted August 30, 2009 Posted August 30, 2009 You don't need to use the slowest speed to get the best quality. Some drives will actually create a better quality burn at one of the faster available speeds... it all depends on how their firmware has been tweaked.
dontasciime Posted August 30, 2009 Posted August 30, 2009 Hopefully you will get a better result after your firmware update. If not clean the lens on the writer & try again, if still the same buy a new writer maybe a Pioneer 115/116/117/118 eg if you can get a 115 for
awoodhall2003 Posted August 30, 2009 Author Posted August 30, 2009 You don't need to use the slowest speed to get the best quality. Some drives will actually create a better quality burn at one of the faster available speeds... it all depends on how their firmware has been tweaked. i was told to burn at 2.4x when backing up 360 games. Hopefully you will get a better result after your firmware update. If not clean the lens on the writer & try again, if still the same buy a new writer maybe a Pioneer 115/116/117/118 eg if you can get a 115 for
mmalves Posted August 30, 2009 Posted August 30, 2009 All current Pioneer burners seem good. Since your drive is a SATA model then maybe you should get a Pioneer 215/216/217 (11x models are IDE interface and 21x are SATA interface)
awoodhall2003 Posted August 30, 2009 Author Posted August 30, 2009 All current Pioneer burners seem good. Since your drive is a SATA model then maybe you should get a Pioneer 215/216/217 (11x models are IDE interface and 21x are SATA interface) ide or sata makes little difference to me! im not using any ide ports at all atm. would you recommend the sata pioneers over the ide or not?
mmalves Posted August 30, 2009 Posted August 30, 2009 They are exactly the same internally, just the interface is different
Recommended Posts