bloodrush Posted March 1, 2010 Share Posted March 1, 2010 I have a new LG BH10LS30 BD Burner. The Device buffer is always at 0%, never rises. Tried it on multiple machines with ImgBurn, same result. Honestly it seems like the Buffer RAM is malfunctioning. is this possible? Never seen this before. I've tried re-flashing to see if that helps, no good. I'm about to take it back for a replacement, just wanted to see if anyone had seen something like this before. Thanks. Link to comment Share on other sites More sharing options...
mmalves Posted March 2, 2010 Share Posted March 2, 2010 The device buffer is always 0% when you're burning? Which speed were you burning? How about the main buffer, does it stay at 100% all the time? Link to comment Share on other sites More sharing options...
bloodrush Posted March 2, 2010 Author Share Posted March 2, 2010 (edited) The device buffer is always 0% when you're burning? Which speed were you burning? How about the main buffer, does it stay at 100% all the time? Main buffer is at 100% unless burning over the network, then it varies a little bit. Yes, device buffer is always at 0% while burning at any speed, 4x, 8x, 16x. the burn finishes ok, it's just freaking me out a bit to see device buffer 0%. It never rises at all above 0%. Seems like there isn't a buffer at all. I've tried it through internal SATA cables and an external USB adapter. Also on 3 different pc's. same result. strangest thing i've ever seen. I've been using L-Uk's software since DVDD, so it's not a user issue Edited March 2, 2010 by bloodrush Link to comment Share on other sites More sharing options...
mmalves Posted March 2, 2010 Share Posted March 2, 2010 Please post the log and the IBG graph file from one of those burns. You can find shortcuts to both of them in ImgBurn's Help menu. Link to comment Share on other sites More sharing options...
bloodrush Posted March 2, 2010 Author Share Posted March 2, 2010 Please post the log and the IBG graph file from one of those burns. You can find shortcuts to both of them in ImgBurn's Help menu. here you go. This was a burn over the network at 8x to a DVD+R. USB/SATA adapter on this burn. Device buffer at 0% the entire time. same result directly connected to MB SATA connectors. It finished OK, had one small hiccup during the burn but recovered. I'm going to be exchanging the drive tonight with another. I'll let you know how that one works out. thanks, HL-DT-ST_BD-RE_BH10LS30_1.00_MONDAY-MARCH-01-2010_3-34_PM_CMC_MAG-M01-00_8x.ibg imgburn.log Link to comment Share on other sites More sharing options...
bloodrush Posted March 2, 2010 Author Share Posted March 2, 2010 Please post the log and the IBG graph file from one of those burns. You can find shortcuts to both of them in ImgBurn's Help menu. I exchanged the drive for a new one. I'm still getting the same behavior. Strange, could ImgBurn be sending back incorrect info about this drive? Does anyone else have this drive? Link to comment Share on other sites More sharing options...
bloodrush Posted March 2, 2010 Author Share Posted March 2, 2010 (edited) Please post the log and the IBG graph file from one of those burns. You can find shortcuts to both of them in ImgBurn's Help menu. I decided to risk one of my precious Verbatim BD-R's. Guess what, with BD-R media the device buffer fills to 95% and pretty much stays there for the entire burn. So as far as I can see. With DVD media, device buffer is at 0%, BD-R media device buffer is normal. Weird!! Anyone care to explain? Thanks, Edited March 2, 2010 by bloodrush Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted March 2, 2010 Share Posted March 2, 2010 Firmware bug I guess. ImgBurn gets the buffer info from a single command which is the same for every drive. As it works fine on all the drives I've ever used (and it's not something I have any reason to mess with), the problem must be with the LG drive. Link to comment Share on other sites More sharing options...
bloodrush Posted March 2, 2010 Author Share Posted March 2, 2010 Firmware bug I guess. ImgBurn gets the buffer info from a single command which is the same for every drive. As it works fine on all the drives I've ever used (and it's not something I have any reason to mess with), the problem must be with the LG drive. Agreed, as i've never once had an issue with your incredible software L-UK, I too would point the finger at LG. It seems to burn with no problems, so i'll stop worrying about it. Link to comment Share on other sites More sharing options...
Recommended Posts