sony dru 800a faillure

[paulusss]

Hi all,

 

I just attached my SONY DVD RW DRU-800A KY06 (E:) (ATA), but getting only faillures right at the beginning of the burn process(using Verbatim +R DL 8x). I updated my firmware and my bios sees the Sony DRU burner as IDE..

 

This is the error message from imgburn:

 

ImgBurn

---------------------------

I/O Error!

 

Device: [1:0:0] SONY DVD RW DRU-800A KY06 (E:) (ATA)

 

ScsiStatus: 0x02

Interpretation: Check Condition

 

CDB: 2A 00 00 00 31 00 00 00 20 00

Interpretation: Write (10) - Sectors: 12544 - 12575

 

Sense Area: 70 00 05 00 00 00 00 0A 00 00 00 00 21 02 00 00 00 00

Interpretation: Invalid Address For Write

---------------------------

Retry Cancel

 

----------

It seems that the burn-speed doesnt even get to 2.4x speed.. it goes till somewhere between 1.2 - 1.5x and then it stoppes and i get this errorpopup.

 

Plss help me out, i toasted 5 DL's already. If this keeps up, i am broke be4 tomorrow

 

Thanks in advance!!

 

 

ps. i use 'Sectors in L0' user specified nr: 1913760

ps2. dont know if it contains any usefull info, but to be sure i'll attach the following:

------------

SONY DVD RW DRU-800A KY06 (ATA)

Current Profile: DVD+R DL

 

Disc Information:

Status: Empty

State of Last Session: Empty

Erasable: No

Free Sectors: 3,827,520

Free Space: 7,838,760,960 bytes

Free Time: 850:35:45 (MM:SS:FF)

Next Writable Address: 0

Supported Write Speeds: 2.4x

 

DVD±R DL Boundary Information:

L0 Data Zone Capacity: 1,913,760

Changeable: No

 

Physical Format Information (ADIP - L0):

Disc ID: MKM-003-00

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

 

Physical Format Information (ADIP - L1):

Disc ID: MKM-003-00

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

 

Physical Format Information (Last Recorded - L0):

Disc ID: MKM-003-00

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,110,367

 

Physical Format Information (Last Recorded - L1):

Disc ID: MKM-003-00

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,110,367

 

Performance (Write Speed):

Descriptor 1...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 0 (0x00000000)

-> RS: 3,324 KB/s (2.4x) - WS: 3,324 KB/s (2.4x)

-------

 

; //****************************************\\

; ImgBurn Version 2.5.1.0 - Log

; Wednesday, 31 March 2010, 16:55:17

; \\****************************************//

;

;

I 16:19:28 ImgBurn Version 2.5.1.0 started!

I 16:19:28 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 16:19:28 Total Physical Memory: 3,406,892 KB - Available: 2,733,932 KB

W 16:19:28 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 16:19:28 Initialising SPTI...

I 16:19:28 Searching for SCSI / ATAPI devices...

I 16:19:28 -> Drive 1 - Info: SONY DVD RW DRU-800A KY06 (E:) (ATA)

I 16:19:28 -> Drive 2 - Info: TSSTcorp DVD+-RW TS-H653A D300 (I:) (ATA)

I 16:19:28 -> Drive 3 - Info: NQDE DIB4PQ7K5 1.03 (J:) (SCSI)

I 16:19:28 Found 2 DVD±RWs and 1 BD-ROM/HD DVD-ROM!

I 16:21:46 Operation Started!

I 16:21:46 Source File: C:\Documents and Settings\Paul\Desktop\fable2backup.dvd

I 16:21:46 Source File Sectors: 3,825,924 (MODE1/2048)

I 16:21:46 Source File Size: 7,835,492,352 bytes

I 16:21:46 Source File Volume Identifier: XGD2DVD_NTSC

I 16:21:46 Source File Volume Set Identifier: 34672923

I 16:21:46 Source File Implementation Identifier: Sonic Scenarist 3.1

I 16:21:46 Source File File System(s): ISO9660, UDF (1.02)

I 16:21:46 Destination Device: [1:0:0] SONY DVD RW DRU-800A KY06 (E:) (ATA)

I 16:21:46 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x)

I 16:21:46 Destination Media Sectors: 4,173,824

I 16:21:46 Write Mode: DVD

I 16:21:46 Write Type: DAO

I 16:21:46 Write Speed: 2.4x

I 16:21:46 Link Size: Auto

I 16:21:46 Lock Volume: Yes

I 16:21:46 Test Mode: No

I 16:21:46 OPC: No

I 16:21:46 BURN-Proof: Enabled

I 16:21:46 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x)

I 16:21:46 User Specified L0 Data Zone Capacity: 1,913,760

I 16:22:17 Set L0 Data Zone Capacity Succeeded!

I 16:22:17 Filling Buffer... (40 MB)

I 16:22:18 Writing LeadIn...

I 16:22:38 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825923)

I 16:22:38 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825923)

I 16:22:38 Writing Layer 0... (LBA: 0 - 1913759)

W 16:22:52 Failed to Write Sectors 12544 - 12575 - Reason: Invalid Address For Write

W 16:22:52 Retrying (1 of 20)...

W 16:22:52 Retry Failed - Reason: Invalid Address For Write

W 16:22:52 Retrying (2 of 20)...

W 16:22:52 Retry Failed - Reason: Invalid Address For Write

W 16:22:52 Retrying (3 of 20)...

W 16:22:52 Retry Failed - Reason: Invalid Address For Write

W 16:22:52 Retrying (4 of 20)...

W 16:22:52 Retry Failed - Reason: Invalid Address For Write

W 16:22:52 Retrying (5 of 20)...

W 16:26:55 Retry Failed - Reason: Invalid Address For Write

E 16:32:08 Failed to Write Sectors 12544 - 12575 - Reason: Invalid Address For Write

E 16:32:08 Next Writable Address: 0

I 16:32:08 Synchronising Cache...

W 16:32:25 User opted to skip the 'Close Track/Session/Disc' functions.

E 16:32:25 Failed to Write Image!

I 16:32:25 Exporting Graph Data...

I 16:32:25 Graph Data File: C:\Documents and Settings\Paul\Application Data\ImgBurn\Graph Data Files\SONY_DVD_RW_DRU-800A_KY06_WEDNESDAY-MARCH-31-2010_4-21_PM_MKM-003-00_2.4x.ibg

I 16:32:25 Export Successfully Completed!

E 16:32:25 Operation Failed! - Duration: 00:10:39

I 16:32:25 Average Write Rate: 44 KB/s (0.0x) - Maximum Write Rate: 3,334 KB/s (2.4x)

I 16:55:17 Close Request Acknowledged

;

;

; //****************************************\\

; ImgBurn Version 2.5.1.0 - Log

; Wednesday, 31 March 2010, 16:16:20

; \\****************************************//

;

;

I 16:16:16 ImgBurn Version 2.5.1.0 started!

I 16:16:16 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 16:16:16 Total Physical Memory: 3,406,892 KB - Available: 2,740,228 KB

W 16:16:16 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 16:16:16 Initialising SPTI...

I 16:16:16 Searching for SCSI / ATAPI devices...

I 16:16:16 -> Drive 1 - Info: SONY DVD RW DRU-800A KY06 (E:) (ATA)

I 16:16:16 -> Drive 2 - Info: TSSTcorp DVD+-RW TS-H653A D300 (I:) (ATA)

I 16:16:16 -> Drive 3 - Info: NQDE DIB4PQ7K5 1.03 (J:) (SCSI)

I 16:16:16 Found 2 DVD±RWs and 1 BD-ROM/HD DVD-ROM!

I 16:16:20 Close Request Acknowledged

I 16:16:20 Closing Down...

I 16:16:20 Shutting down SPTI...

I 16:16:20 ImgBurn closed!

[LIGHTNING UK!]

The firmware on your drive doesn't support the MKM-003-00 dye.

 

Media Code Speed Edit V 1.2.0.6

------------------------------------------

 

Firmware: SONY DVD RW DRU-800A KY06 Oct31 ,2005

Bootcode: SONY DVD RW DRU-800A 0Y082005/10/31 12:23

------------------------------------------

 

DVD+R9 supported media types: 10

------------------------------------------

CMC MAG D01-000 2.4x

INFOME D01-000 2.4x

MKM 001-000 4x,2.4x

PHILIPS CD2-000 2.4x

PHILIPS PD2-000 2.4x

PRODISC D01-000 2.4x

RICOHJPN D00-001 2.4x

RICOHJPN D01-002 4x

RITEK D01-001 2.4x

RITEK X01-001 2.4x

 

Get the 2.4x speed Verbatim discs (MKM-001-00 dye) instead or crossflash to the LiteOn SHOW-1693S KS0B firmware.

 

Media Code Speed Edit V 1.2.0.6

------------------------------------------

 

Firmware: LITE-ON DVDRW SOHW-1693SKS0B2005/08/22 16:30

Bootcode: LITE-ON DVDRW SOHW-1693S0S082005/08/22 16:30

------------------------------------------

 

DVD+R9 supported media types: 12

------------------------------------------

CMC MAG D01-000 4x,2.4x

INFOME D01-000 2.4x

MKM 001-000 4x,2.4x

MKM 003-000 4x

PHILIPS CD2-000 4x,2.4x

PHILIPS PD2-000 2.4x

PRODISC D01-000 2.4x

RICOHJPN D00-001 2.4x

RICOHJPN D01-002 2.4x

RITEK D01-001 4x,2.4x

RITEK S04-001 2.4x

RITEK X01-001 2.4x

[paulusss]

Thanks a lot!!! Installed 1693S.KC4B.patched-cf and just burned 1 succesfull

 

Cheers!

[dontasciime]

^^ I know him :lol