databurner Posted April 5, 2010 Share Posted April 5, 2010 Hello all , thanks for this forum and for ImgBurn I have used Imation DVD+R DL(10 DVDS with success) and then tried Memorex (made in Taiwan) had many problems with so I found Verbatim MKM-003-00 (made in India) (10 successful DVDs) ,then went back to Imation (more expensive than Verbatim here) and the second DVD gave me this: ; //****************************************\\ ; ImgBurn Version 2.5.0.0 - Log ; Monday, 05 April 2010, 09:38:03 ; \\****************************************// ; ; I 09:12:28 ImgBurn Version 2.5.0.0 started! I 09:12:28 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 09:12:28 Total Physical Memory: 392,688 KB - Available: 149,596 KB W 09:12:28 SPTD can have a detrimental effect on drive performance. I 09:12:28 Initialising SPTI... I 09:12:28 Searching for SCSI / ATAPI devices... I 09:12:28 Found 1 DVD±RW/RAM! I 09:15:32 Operation Started! I 09:15:32 Source File: I:\sp-dv\sp-dv.dvd I 09:15:32 Source File Sectors: 3,827,488 (MODE1/2048) I 09:15:32 Source File Size: 7,838,695,424 bytes I 09:15:32 Source File Volume Identifier: DVD_ROM I 09:15:32 Source File Volume Set Identifier: fd244000MS UDFBridge I 09:15:32 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 09:15:32 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 09:15:32 Source File File System(s): ISO9660, UDF (1.50) I 09:15:32 Destination Device: [1:0:0] HL-DT-ST DVD-RAM GSA-H55N 1.06 (E:) (ATA) I 09:15:32 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 4x, 6x, 8x) I 09:15:32 Destination Media Sectors: 4,173,824 I 09:15:32 Write Mode: DVD I 09:15:32 Write Type: DAO I 09:15:32 Write Speed: 4x I 09:15:32 Link Size: Auto I 09:15:32 Lock Volume: Yes I 09:15:32 Test Mode: No I 09:15:32 OPC: No I 09:15:32 BURN-Proof: Enabled I 09:15:32 Book Type Setting: DVD-ROM I 09:15:32 User Specified L0 Data Zone Capacity: 1,913,760 I 09:15:32 Set L0 Data Zone Capacity Succeeded! I 09:15:33 Filling Buffer... (20 MB) I 09:15:34 Writing LeadIn... I 09:16:06 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 09:16:06 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 09:16:06 Writing Layer 0... (LBA: 0 - 1913759) W 09:16:09 Failed to Write Sectors 704 - 735 - Reason: No Seek Complete W 09:16:09 Retrying (1 of 20)... W 09:16:09 Retry Failed - Reason: Invalid Address For Write W 09:16:09 Retrying (2 of 20)... W 09:16:09 Retry Failed - Reason: Invalid Address For Write W 09:16:09 Retrying (3 of 20)... W 09:16:09 Retry Failed - Reason: Invalid Address For Write W 09:16:09 Retrying (4 of 20)... W 09:16:09 Retry Failed - Reason: Invalid Address For Write W 09:16:09 Retrying (5 of 20)... W 09:16:09 Retry Failed - Reason: Invalid Address For Write W 09:16:09 Retrying (6 of 20)... W 09:16:09 Retry Failed - Reason: Invalid Address For Write W 09:16:09 Retrying (7 of 20)... W 09:16:09 Retry Failed - Reason: Invalid Address For Write W 09:16:09 Retrying (8 of 20)... W 09:16:09 Retry Failed - Reason: Invalid Address For Write W 09:16:09 Retrying (9 of 20)... W 09:16:09 Retry Failed - Reason: Invalid Address For Write W 09:16:09 Retrying (10 of 20)... W 09:16:09 Retry Failed - Reason: Invalid Address For Write W 09:16:09 Retrying (11 of 20)... W 09:16:09 Retry Failed - Reason: Invalid Address For Write W 09:16:09 Retrying (12 of 20)... W 09:16:09 Retry Failed - Reason: Invalid Address For Write W 09:16:09 Retrying (13 of 20)... W 09:16:09 Retry Failed - Reason: Invalid Address For Write W 09:16:09 Retrying (14 of 20)... W 09:16:09 Retry Failed - Reason: Invalid Address For Write W 09:16:09 Retrying (15 of 20)... W 09:16:09 Retry Failed - Reason: Invalid Address For Write W 09:16:09 Retrying (16 of 20)... W 09:16:09 Retry Failed - Reason: Invalid Address For Write W 09:16:09 Retrying (17 of 20)... W 09:16:09 Retry Failed - Reason: Invalid Address For Write W 09:16:09 Retrying (18 of 20)... W 09:16:09 Retry Failed - Reason: Invalid Address For Write W 09:16:09 Retrying (19 of 20)... W 09:16:09 Retry Failed - Reason: Invalid Address For Write W 09:16:09 Retrying (20 of 20)... W 09:16:09 Retry Failed - Reason: Invalid Address For Write E 09:17:18 Failed to Write Sectors 704 - 735 - Reason: No Seek Complete E 09:17:18 Next Writable Address: 0 I 09:17:18 Synchronising Cache... W 09:17:28 User opted to skip the 'Close Track/Session/Disc' functions. E 09:17:28 Failed to Write Image! I 09:17:28 Exporting Graph Data... I 09:17:28 Graph Data File: C:\Documents and Settings\one\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVD-RAM_GSA-H55N_1.06_MONDAY-APRIL-05-2010_9-15_AM_RITEK-S04-66_4x.ibg I 09:17:28 Export Successfully Completed! E 09:17:28 Operation Failed! - Duration: 00:01:55 I 09:17:28 Average Write Rate: 19 KB/s (0.0x) - Maximum Write Rate: 19 KB/s (0.0x) I 09:38:02 Close Request Acknowledged I 09:38:02 Closing Down... I 09:38:03 Shutting down SPTI... I 09:38:03 ImgBurn closed! My questions: 1- Is it media thing again after past success ? (my driver is up to date) 2-I had 2 good DVDs with Memorex before it started giving errors for all, can I do something to reset the drive before trying another imation ? it seems drives tend to stop working once one disc fails, like it locks on that error, don't know if anybody feels the same. 3- Can I use the same disc again for another try since the error is in very first sectors ? OR for storing files maybe ? how can I skip that sector range in that case? 4- I haven't updated to ImgBurn latest version, could this fix it ? Thank you in advance Link to comment Share on other sites More sharing options...
eSkRo Posted April 5, 2010 Share Posted April 5, 2010 (edited) 1- always use the LATEST ImgBurn version,,,,, 2- i would use a DVD Lens Cleaner too before burning again,,,, 3- Also, read here --> http://fwd4.me/6yD Edited April 5, 2010 by eSkRo Link to comment Share on other sites More sharing options...
databurner Posted April 5, 2010 Author Share Posted April 5, 2010 (edited) 1- always use the LATEST ImgBurn version,,,,, 2- i would use a DVD Lens Cleaner too before burning again,,,, 3- Also, read here --> http://fwd4.me/6yD 1. 2.5.1.0 caused NOD32 to use 100% CPU , I tried to install with different settings and restarted many times and reinstalled many times but not working 3. I already read that,thanks Edited April 5, 2010 by databurner Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted April 5, 2010 Share Posted April 5, 2010 NOD might have fixed it's definitions by now. Link to comment Share on other sites More sharing options...
databurner Posted April 5, 2010 Author Share Posted April 5, 2010 NOD might have fixed it's definitions by now. why ? it's a known issue and you contacted them about it in the last 3 hours? what do you mean? definitions are for viruses, I didn't get any virus or so alert, just high CPU usage while ImgBurn is running. Anyway is the error I got related to the version ? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted April 5, 2010 Share Posted April 5, 2010 Sorry, I assumed you meant you'd tried it when it was released a few weeks ago and it didn't play nicely. AV programs have issues with the UPX compression used on the exe (decompress it and it'll probably work fine). That's typically what causes them to mess up and they usually fix the problem by means of updated definitions. No, the error you get is related to your drive moaning about the discs you're using. You should have stuck with the Verbatim discs. Link to comment Share on other sites More sharing options...
databurner Posted April 5, 2010 Author Share Posted April 5, 2010 (edited) Sorry, I assumed you meant you'd tried it when it was released a few weeks ago and it didn't play nicely. AV programs have issues with the UPX compression used on the exe (decompress it and it'll probably work fine). That's typically what causes them to mess up and they usually fix the problem by means of updated definitions. No, the error you get is related to your drive moaning about the discs you're using. You should have stuck with the Verbatim discs. but I can't decompress it, you are speaking theoretically, right ? Can I retry the same disc again ? If not, is it wasted for archiving too ? for demos for example? Edited April 5, 2010 by databurner Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted April 5, 2010 Share Posted April 5, 2010 No, you can decompress it using the same UPX tool I used to compress it. You might be able to try using the disc again, give it a go, it'll either work or fail! Link to comment Share on other sites More sharing options...
databurner Posted April 5, 2010 Author Share Posted April 5, 2010 No, you can decompress it using the same UPX tool I used to compress it. You might be able to try using the disc again, give it a go, it'll either work or fail! whats the name of that tool ? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted April 5, 2010 Share Posted April 5, 2010 Funnily enough, UPX... that's why I kept saying UPX in my posts. It wasn't to try and trick you! Link to comment Share on other sites More sharing options...
databurner Posted April 5, 2010 Author Share Posted April 5, 2010 Funnily enough, UPX... that's why I kept saying UPX in my posts. It wasn't to try and trick you! ZIP ZIP ZIP ZIP , I use WINRAR to open ZIP Link to comment Share on other sites More sharing options...
databurner Posted April 15, 2010 Author Share Posted April 15, 2010 I got Imgburn 2.5.1.0 to work I got Verbatim 1 DVD worked , 2nd DVD (the the image that failed last time in my previous post) failed again ????? Anyone can help ??? ; //****************************************\\ ; ImgBurn Version 2.5.1.0 - Log ; Thursday, 15 April 2010, 07:19:45 ; \\****************************************// ; ; I 23:16:11 ImgBurn Version 2.5.1.0 started! I 23:16:11 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 23:16:11 Total Physical Memory: 392,688 KB - Available: 91,044 KB W 23:16:11 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 23:16:11 Initialising SPTI... I 23:16:11 Searching for SCSI / ATAPI devices... I 23:16:11 -> Drive 1 - Info: HL-DT-ST DVD-RAM GSA-H55N 1.06 (E:) (ATA) I 23:16:11 Found 1 DVD±RW/RAM! I 06:05:42 Operation Started! I 06:05:42 Source File: I:\A\IMAGE.dvd I 06:05:42 Source File Sectors: 3,827,488 (MODE1/2048) I 06:05:42 Source File Size: 7,838,695,424 bytes I 06:05:42 Source File Volume Identifier: DVD_ROM I 06:05:42 Source File Volume Set Identifier: ec67c000MS UDFBridge I 06:05:42 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 06:05:42 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 06:05:42 Source File File System(s): ISO9660, UDF (1.50) I 06:05:42 Destination Device: [1:0:0] HL-DT-ST DVD-RAM GSA-H55N 1.06 (E:) (ATA) I 06:05:42 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x, 6x, 8x, 10x) I 06:05:42 Destination Media Sectors: 4,173,824 I 06:05:42 Write Mode: DVD I 06:05:42 Write Type: DAO I 06:05:42 Write Speed: 4x I 06:05:42 Link Size: Auto I 06:05:42 Lock Volume: Yes I 06:05:42 Test Mode: No I 06:05:42 OPC: No I 06:05:42 BURN-Proof: Enabled I 06:05:42 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) I 06:05:42 Book Type Setting: DVD-ROM I 06:05:42 User Specified L0 Data Zone Capacity: 1,913,760 I 06:05:42 Set L0 Data Zone Capacity Succeeded! I 06:05:43 Filling Buffer... (20 MB) I 06:05:44 Writing LeadIn... I 06:06:23 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 06:06:23 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 06:06:23 Writing Layer 0... (LBA: 0 - 1913759) I 06:18:52 Writing Layer 1... (LBA: 1913760 - 3827487) I 06:30:48 Synchronising Cache... I 06:31:10 Closing Track... I 06:31:46 Finalising Disc... I 06:32:00 Exporting Graph Data... I 06:32:00 Graph Data File: C:\Documents and Settings\one\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVD-RAM_GSA-H55N_1.06_THURSDAY-APRIL-15-2010_6-05_AM_MKM-003-00_4x.ibg I 06:32:00 Export Successfully Completed! I 06:32:00 Operation Successfully Completed! - Duration: 00:26:17 I 06:32:00 Average Write Rate: 5,225 KB/s (3.8x) - Maximum Write Rate: 5,592 KB/s (4.0x) I 06:32:00 Cycling Tray before Verify... W 06:32:10 Waiting for device to become ready... I 06:32:30 Device Ready! I 06:32:33 Operation Started! I 06:32:33 Source Device: [1:0:0] HL-DT-ST DVD-RAM GSA-H55N 1.06 (E:) (ATA) I 06:32:33 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00) (Speeds: 4x, 6x, 8x, 10x) I 06:32:33 Image File: I:\Metro.2033.PAL.MULTi4.READ.NFO.XBOX360-DNL\dnl-met33\IMAGE.dvd I 06:32:33 Image File Sectors: 3,827,488 (MODE1/2048) I 06:32:33 Image File Size: 7,838,695,424 bytes I 06:32:33 Image File Volume Identifier: DVD_ROM I 06:32:33 Image File Volume Set Identifier: ec67c000MS UDFBridge I 06:32:33 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 06:32:33 Image File Implementation Identifier: Microsoft CDIMAGE UDF I 06:32:33 Image File File System(s): ISO9660, UDF (1.50) I 06:32:33 Read Speed (Data/Audio): MAX / MAX I 06:32:33 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 06:32:33 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 06:32:33 Verifying Layer 0... (LBA: 0 - 1913759) I 06:38:15 Verifying Layer 1... (LBA: 1913760 - 3827487) I 06:43:55 Exporting Graph Data... I 06:43:55 Graph Data File: C:\Documents and Settings\one\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVD-RAM_GSA-H55N_1.06_THURSDAY-APRIL-15-2010_6-05_AM_MKM-003-00_4x.ibg I 06:43:55 Export Successfully Completed! I 06:43:55 Operation Successfully Completed! - Duration: 00:11:22 I 06:43:55 Average Verify Rate: 11,224 KB/s (8.1x) - Maximum Verify Rate: 15,248 KB/s (11.0x) I 07:13:50 Operation Started! I 07:13:50 Source File: I:\sp-dv\sp-dv.dvd I 07:13:50 Source File Sectors: 3,827,488 (MODE1/2048) I 07:13:50 Source File Size: 7,838,695,424 bytes I 07:13:50 Source File Volume Identifier: DVD_ROM I 07:13:50 Source File Volume Set Identifier: fd244000MS UDFBridge I 07:13:50 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 07:13:50 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 07:13:50 Source File File System(s): ISO9660, UDF (1.50) I 07:13:50 Destination Device: [1:0:0] HL-DT-ST DVD-RAM GSA-H55N 1.06 (E:) (ATA) I 07:13:50 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x, 6x, 8x, 10x) I 07:13:50 Destination Media Sectors: 4,173,824 I 07:13:50 Write Mode: DVD I 07:13:50 Write Type: DAO I 07:13:50 Write Speed: 4x I 07:13:50 Link Size: Auto I 07:13:50 Lock Volume: Yes I 07:13:50 Test Mode: No I 07:13:50 OPC: No I 07:13:50 BURN-Proof: Enabled I 07:13:50 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) I 07:13:50 Book Type Setting: DVD-ROM I 07:13:50 User Specified L0 Data Zone Capacity: 1,913,760 I 07:13:50 Set L0 Data Zone Capacity Succeeded! I 07:13:51 Filling Buffer... (20 MB) I 07:13:52 Writing LeadIn... I 07:14:32 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 07:14:32 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 07:14:32 Writing Layer 0... (LBA: 0 - 1913759) W 07:15:56 Failed to Write Sectors 222720 - 222751 - Reason: Spindle Servo Failure W 07:15:56 Retrying (1 of 20)... W 07:15:56 Retry Failed - Reason: No Seek Complete W 07:15:56 Retrying (2 of 20)... W 07:15:56 Retry Failed - Reason: Invalid Address For Write W 07:15:56 Retrying (3 of 20)... W 07:15:56 Retry Failed - Reason: Invalid Address For Write W 07:15:56 Retrying (4 of 20)... W 07:15:56 Retry Failed - Reason: Invalid Address For Write W 07:15:56 Retrying (5 of 20)... W 07:15:56 Retry Failed - Reason: Invalid Address For Write W 07:15:56 Retrying (6 of 20)... W 07:15:56 Retry Failed - Reason: Invalid Address For Write W 07:15:56 Retrying (7 of 20)... W 07:15:56 Retry Failed - Reason: Invalid Address For Write W 07:15:56 Retrying (8 of 20)... W 07:15:56 Retry Failed - Reason: Invalid Address For Write W 07:15:56 Retrying (9 of 20)... W 07:15:56 Retry Failed - Reason: Invalid Address For Write W 07:15:56 Retrying (10 of 20)... W 07:15:56 Retry Failed - Reason: Invalid Address For Write W 07:15:56 Retrying (11 of 20)... W 07:15:56 Retry Failed - Reason: Invalid Address For Write W 07:15:56 Retrying (12 of 20)... W 07:15:56 Retry Failed - Reason: Invalid Address For Write W 07:15:56 Retrying (13 of 20)... W 07:15:56 Retry Failed - Reason: Invalid Address For Write W 07:15:56 Retrying (14 of 20)... W 07:15:56 Retry Failed - Reason: Invalid Address For Write W 07:15:56 Retrying (15 of 20)... W 07:15:56 Retry Failed - Reason: Invalid Address For Write W 07:15:56 Retrying (16 of 20)... W 07:15:56 Retry Failed - Reason: Invalid Address For Write W 07:15:56 Retrying (17 of 20)... W 07:15:56 Retry Failed - Reason: Invalid Address For Write W 07:15:56 Retrying (18 of 20)... W 07:15:56 Retry Failed - Reason: Invalid Address For Write W 07:15:56 Retrying (19 of 20)... W 07:15:56 Retry Failed - Reason: Invalid Address For Write W 07:15:56 Retrying (20 of 20)... W 07:15:56 Retry Failed - Reason: Invalid Address For Write E 07:16:16 Failed to Write Sectors 222720 - 222751 - Reason: Spindle Servo Failure E 07:16:16 Next Writable Address: 0 I 07:16:16 Synchronising Cache... W 07:16:25 User opted to skip the 'Close Track/Session/Disc' functions. E 07:16:25 Failed to Write Image! I 07:16:25 Exporting Graph Data... I 07:16:25 Graph Data File: C:\Documents and Settings\one\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVD-RAM_GSA-H55N_1.06_THURSDAY-APRIL-15-2010_7-13_AM_MKM-003-00_4x.ibg I 07:16:25 Export Successfully Completed! E 07:16:25 Operation Failed! - Duration: 00:02:34 I 07:16:25 Average Write Rate: 4,324 KB/s (3.1x) - Maximum Write Rate: 5,618 KB/s (4.1x) I 07:19:42 Close Request Acknowledged I 07:19:42 Closing Down... I 07:19:44 Shutting down SPTI... I 07:19:44 ImgBurn closed! Link to comment Share on other sites More sharing options...
mmalves Posted April 15, 2010 Share Posted April 15, 2010 Try burning at 6x or 8x. Try a lens cleaning disc on that burner. If all that doesn't solve your problem then it's time for a new burner. Link to comment Share on other sites More sharing options...
databurner Posted April 15, 2010 Author Share Posted April 15, 2010 Try burning at 6x or 8x. Try a lens cleaning disc on that burner. If all that doesn't solve your problem then it's time for a new burner. hi thx for replying 1.have you seen cases where higher speed was better ? 2.Isn't there a chance the the image is the problem ? I don't want to go buy new burner to find out it is was for nothing, I have no problem buying new one, its already costing me , but I just would like to know what is happening Link to comment Share on other sites More sharing options...
mmalves Posted April 15, 2010 Share Posted April 15, 2010 1. Every day, since newer burners like yours are better tuned for faster burns, and also the Verbatim blanks you have are rated for 8x burning. 2. No, because the burner doesn't care about the data it's burning. The burn process relies on the burner/firmware/media combination: your firmware is the latest and the Verbatim media you have is good quality, so what else is left? Try cleaning the burner with a lens cleaning disc, or even manually if you know how to dissect it , and also try burning at 6x and 8x. Link to comment Share on other sites More sharing options...
databurner Posted April 15, 2010 Author Share Posted April 15, 2010 1. Every day, since newer burners like yours are better tuned for faster burns, and also the Verbatim blanks you have are rated for 8x burning. 2. No, because the burner doesn't care about the data it's burning. The burn process relies on the burner/firmware/media combination: your firmware is the latest and the Verbatim media you have is good quality, so what else is left? Try cleaning the burner with a lens cleaning disc, or even manually if you know how to dissect it , and also try burning at 6x and 8x. Thanks mmalves for answering and explaining I will give it another try on 6X or 8X with different Image after cleaning it , if it fails I will go find a new burner Regards Link to comment Share on other sites More sharing options...
databurner Posted April 16, 2010 Author Share Posted April 16, 2010 (edited) 1. 2.5.1.0 caused NOD32 to use 100% CPU , I tried to install with different settings and restarted many times and reinstalled many times but not working I forgot to mention how I fixed the CPU load in ESET NOD32 Go to Advanced setup >> real time system scan >> setup >> Objects >> untick "Runtime packers" , and its off by default anyway Good luck Edited April 16, 2010 by databurner Link to comment Share on other sites More sharing options...
Recommended Posts