djmasturbeat Posted May 21, 2010 Posted May 21, 2010 (edited) First off thanks for this great piece of software and sharing it with everyone. I have seen others with this problem, tho usually pertaining to bad media or burning PS3 games; of course i have not read all 100,000+ posts Now, I have followed advice to use Verbatim DL, MKM-001-00, and my firmware is updated from firmware HQ, for my TSST Corp TSSTcorp CDDVDW SH-S223F SB03(Samsung SH-S223F) drive. The problem is that other DL media will burn, just many of the burns turn out coasters, but the drive will not even use the good Verbatim DL, MKM-001-00 discs (and not just in this software, but other burning software as well. i won't pretend to know a lot about media and dyes, but am i correct in thinking this drive is junk since it doesn't like good DVDs made with good dyes? anyhow, here is a log: I 00:05:06 ImgBurn Version 2.5.1.0 started! I 00:05:06 Microsoft Windows Vista Home Premium x64 Edition (6.0, Build 6002 : Service Pack 2) I 00:05:06 Total Physical Memory: 6,281,396 KB - Available: 1,297,208 KB I 00:05:06 Initialising Patin-Couffin... I 00:05:06 Patin-Couffin - VSO Software - Version 1.37.0.0 - Internal Revision 37 I 00:05:06 Searching for SCSI / ATAPI devices... I 00:05:06 -> Drive 1 - Info: SONY BD-ROM BDU-X10S 1.0d (E:) (ATA) I 00:05:07 -> Drive 2 - Info: TSSTcorp CDDVDW SH-S223F SB03 (F:) (ATA) I 00:05:07 -> Drive 3 - Info: ELBY CLONEDRIVE 1.4 (T:) (SCSI) I 00:05:07 -> Drive 4 - Info: ELBY CLONEDRIVE 1.4 (U:) (SCSI) I 00:05:07 -> Drive 5 - Info: ELBY CLONEDRIVE 1.4 I 00:05:07 Found 1 DVD±RW/RAM, 1 BD-ROM and 3 BD-ROM/HD DVD-ROMs! I 00:06:56 Operation Started! I 00:06:56 Source File: C:\My Book 21\thisnameischanged.Untouched.NTSC\10\thisnameischanged.MDS I 00:06:56 Source File Sectors: 3,507,536 (MODE1/2048) I 00:06:56 Source File Size: 7,183,433,728 bytes I 00:06:56 Source File Volume Identifier: thisnameischanged I 00:06:56 Source File Volume Set Identifier: 38c5a1ed I 00:06:56 Source File Implementation Identifier: Sonic Scenarist 3.1 I 00:06:56 Source File File System(s): ISO9660, UDF (1.02) I 00:06:56 Destination Device: [2:0:0] TSSTcorp CDDVDW SH-S223F SB03 (F:) (ATA) I 00:06:56 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x) I 00:06:56 Destination Media Sectors: 3,708,288 I 00:06:56 Write Mode: DVD I 00:06:56 Write Type: DAO I 00:06:56 Write Speed: 2.4x I 00:06:56 Link Size: Auto I 00:06:56 Lock Volume: Yes I 00:06:56 Test Mode: No I 00:06:56 OPC: No I 00:06:56 BURN-Proof: Enabled I 00:06:56 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 00:06:56 Book Type Setting: DVD-ROM I 00:06:56 Optimal L0 Data Zone Capacity: 1,817,232 I 00:06:56 Optimal L0 Data Zone Method: Copied From Original Disc E 00:06:59 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in CDB E 00:07:02 Operation Failed! - Duration: 00:00:03 I 00:07:02 Average Write Rate: N/A - Maximum Write Rate: N/A side panel log: --------------------------- TSSTcorp CDDVDW SH-S223F SB03 (ATA) Current Profile: DVD+R DL Disc Information: Status: Empty State of Last Session: Empty Erasable: No Free Sectors: 3,708,288 Free Space: 7,594,573,824 bytes Free Time: 824:05:63 (MM:SS:FF) Next Writable Address: 0 Supported Write Speeds: 2.4x, 4x DVD±R DL Boundary Information: L0 Data Zone Capacity: 1,854,144 Changeable: No Physical Format Information (ADIP - L0): Disc ID: MKM-001-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (ADIP - L1): Disc ID: MKM-001-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (Last Recorded - L0): Disc ID: MKM-001-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (Last Recorded - L1): Disc ID: CMC MAG-M01-00 Book Type: DVD+R Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,233,295 Last Physical Sector in Layer 0: 0 Performance (Write Speed): Descriptor 1... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 3708287 (0x0038957F) -> RS: 16,620 KB/s (12x) - WS: 3,324 KB/s (2.4x) Descriptor 2... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 3708287 (0x0038957F) -> RS: 16,620 KB/s (12x) - WS: 5,540 KB/s (4x) Edited May 21, 2010 by djmasturbeat
Cynthia Posted May 21, 2010 Posted May 21, 2010 I 00:06:56 Destination Media Sectors: 3,708,288 For an unused DL disc it should show the value 4 173 824. Sure it was a new disc you used?
LIGHTNING UK! Posted May 21, 2010 Posted May 21, 2010 Is there a specific reason for you having changed the I/O interface to Patin Couffin? Put it back on SPTI if possible.
djmasturbeat Posted May 22, 2010 Author Posted May 22, 2010 (edited) Is there a specific reason for you having changed the I/O interface to Patin Couffin? Put it back on SPTI if possible. no good reason... i am switching back to SPTI. as for the non-new disc, yeah i must have tried re-using one from a failed attempt, in a rush to have a log to paste in here (my fault) tho i know i have gotten the same error with new discs from new packages. hopefully the problem was my stupidity in changing theI/O interface. thanks for the replies. thanks again for the great software. i will try to get back to you if this helps either way so may be we can close this EDIT: looks so far like i am able to at least start burning the disc without the error right off the bat. i don't remember changing the I/O interface... i did it mistaakenly i guess, since i know it got changed somehow. thanks again for the help. if the DL burns properly i will report back and get this closed out. EDIT: yeah, this now burned the DL properly. the I/O interface was the issue. feel free to close this thread. Edited May 22, 2010 by djmasturbeat
Recommended Posts