stuartnz Posted May 21, 2010 Share Posted May 21, 2010 I've just searched for this error message and did not find it. Attached is the log from my attempts to burn tonight. Any help understanding the problem will be appreciated. Thanks. ImgBurn2105.log Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted May 21, 2010 Share Posted May 21, 2010 This is the error - 'Power Calibration Area Is Full'. You could google that for more advice. Clean your drive and try burning at 8x or 12x. Link to comment Share on other sites More sharing options...
stuartnz Posted May 21, 2010 Author Share Posted May 21, 2010 This is the error - 'Power Calibration Area Is Full'. You could google that for more advice. Clean your drive and try burning at 8x or 12x. Thanks for the tip. The first attempt was at 8x, the 2nd at 12x. I will check the drive, although the PC is very new. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted May 21, 2010 Share Posted May 21, 2010 Your log shows 'MAX' speed for both attempts. Are those real Verbatim discs or cheapo/fakes by another brand? You could try some Verbatim/Taiyo Yuden DVD-R. If it can't burn those either then the drive is probably faulty. Link to comment Share on other sites More sharing options...
Recommended Posts