malinka123 Posted July 18, 2010 Posted July 18, 2010 This topic was rised once but never answered. On some burners while using double layer disk DL mode and setting Layer Break to desired value, the disk gets burned with default half size for 0 layer. Member spudgun Noticed specific ODD burner-drive with this problem TSSTcorp CDDVDW SH-S223C SB01 (D:) (ATA) See http://forum.imgburn.com/index.php?showtopic=13049 I have seen some others as well. Is that bad driver? bad ODD? bad firmware? Any help please... Thank you very much in advance. ==========More details================ Under Win XP SP2, ImgBurn Version 2.5.1.0 In section of log below I note: I 01:50:43 Writing Layer 0... (LBA: 0 - 1913759) I 02:02:39 Writing Layer 1... (LBA: 1913760 - 3697695)[/b] I 02:14:17 Synchronising Cache... I 02:14:19 Closing Track... I 02:14:20 Finalising Disc... Looks like break set OK--!!! BUT verification is not OK: I 02:16:33 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3697695) I 02:16:33 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3697695) I 02:16:33 Verifying Layer 0... (LBA: 0 - 2086911) W 02:22:36 Miscompare at LBA: 1913760, Offset: 0 W 02:22:36 Device: 0x00 Verification shows different layer break (2086911)---!!! ========log for reference============= ; //****************************************\\ ; ImgBurn Version 2.5.1.0 - Log ; Saturday, 17 July 2010, 02:23:41 ; \\****************************************// ; ; I 01:47:36 ImgBurn Version 2.5.1.0 started! I 01:47:36 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 01:47:36 Total Physical Memory: 2,095,536 KB - Available: 1,589,748 KB W 01:47:36 Drive I:\ (FAT32) does not support single files > 4 GB in size. W 01:47:36 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 01:47:36 Initialising SPTI... I 01:47:36 Searching for SCSI / ATAPI devices... I 01:47:36 -> Drive 1 - Info: TSSTcorp CDDVDW SH-S223C SB02 (D:) (SCSI) I 01:47:36 -> Drive 2 - Info: SCSIVAX DVD/CD-ROM 2.7a (F:) (SCSI) I 01:47:36 -> Drive 3 - Info: HUAWEI Mass Storage 2.31 (G:) (USB) I 01:47:36 Found 1 DVD-ROM, 1 DVD±RW/RAM and 1 Unknown! I 01:50:17 Operation Started! I 01:50:17 Source File: C:\Image.dvd I 01:50:17 Source File Sectors: 3,697,696 (MODE1/2048) I 01:50:17 Source File Size: 7,572,881,408 bytes I 01:50:17 Source File Volume Identifier: XBOX360 I 01:50:17 Source File Volume Set Identifier: 33479a57 I 01:50:17 Source File Implementation Identifier: Daikin U.S. Comtec Lab I 01:50:17 Source File File System(s): ISO9660, UDF (1.02) I 01:50:17 Destination Device: [2:2:0] TSSTcorp CDDVDW SH-S223C SB02 (D:) (SCSI) I 01:50:17 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x, 6x, 8x) I 01:50:17 Destination Media Sectors: 4,173,824 I 01:50:17 Write Mode: DVD I 01:50:17 Write Type: DAO I 01:50:17 Write Speed: 2x I 01:50:17 Link Size: Auto I 01:50:17 Lock Volume: Yes I 01:50:17 Test Mode: No I 01:50:17 OPC: No I 01:50:17 BURN-Proof: Enabled W 01:50:17 Write Speed Miscompare! - MODE SENSE: 5,540 KB/s (4x), GET PERFORMANCE: 8,310 KB/s (6x) W 01:50:17 Write Speed Miscompare! - MODE SENSE: 5,540 KB/s (4x), GET PERFORMANCE: 8,310 KB/s (6x) W 01:50:17 Write Speed Miscompare! - MODE SENSE: 5,540 KB/s (4x), GET PERFORMANCE: 8,310 KB/s (6x) W 01:50:17 Write Speed Miscompare! - MODE SENSE: 5,540 KB/s (4x), GET PERFORMANCE: 8,310 KB/s (6x) W 01:50:17 Write Speed Miscompare! - Wanted: 2,770 KB/s (2x), Got: 5,540 KB/s (4x) / 8,310 KB/s (6x) I 01:50:17 Book Type Setting: N/A I 01:50:17 Optimal L0 Data Zone Capacity: 1,913,760 I 01:50:17 Optimal L0 Data Zone Method: Copied From Original Disc I 01:50:41 Set L0 Data Zone Capacity Succeeded! I 01:50:41 Filling Buffer... (40 MB) I 01:50:42 Writing LeadIn... I 01:50:43 Writing Session 1 of 1... (1 Track, LBA: 0 - 3697695) I 01:50:43 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3697695) I 01:50:43 Writing Layer 0... (LBA: 0 - 1913759) I 02:02:39 Writing Layer 1... (LBA: 1913760 - 3697695) I 02:14:17 Synchronising Cache... I 02:14:19 Closing Track... I 02:14:20 Finalising Disc... I 02:15:45 Exporting Graph Data... I 02:15:45 Graph Data File: C:\Documents and Settings\iii\Application Data\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_SH-S223C_SB02_SATURDAY-JULY-17-2010_01-50_RICOHJPN-D01-67_2x.ibg I 02:15:45 Export Successfully Completed! I 02:15:45 Operation Successfully Completed! - Duration: 00:25:28 I 02:15:45 Average Write Rate: 5,233 KB/s (3.8x) - Maximum Write Rate: 5,642 KB/s (4.1x) I 02:15:45 Cycling Tray before Verify... W 02:15:52 Waiting for device to become ready... I 02:16:32 Device Ready! I 02:16:33 Operation Started! I 02:16:33 Source Device: [2:2:0] TSSTcorp CDDVDW SH-S223C SB02 (D:) (SCSI) I 02:16:33 Source Media Type: DVD+R DL (Book Type: DVD+R DL) (Disc ID: RICOHJPN-d01-67) (Speeds: 4x) I 02:16:33 Image File: C:\Image.dvd I 02:16:33 Image File Sectors: 3,697,696 (MODE1/2048) I 02:16:33 Image File Size: 7,572,881,408 bytes I 02:16:33 Image File Volume Identifier: XBOX360 I 02:16:33 Image File Volume Set Identifier: 33479a57 I 02:16:33 Image File Implementation Identifier: Daikin U.S. Comtec Lab I 02:16:33 Image File File System(s): ISO9660, UDF (1.02) I 02:16:33 Read Speed (Data/Audio): MAX / MAX I 02:16:33 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3697695) I 02:16:33 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3697695) I 02:16:33 Verifying Layer 0... (LBA: 0 - 2086911) W 02:22:36 Miscompare at LBA: 1913760, Offset: 0 W 02:22:36 Device: 0x00 W 02:22:36 Image File: 0x5B W 02:22:36 Total Errors in Sector: 80 I 02:22:36 Verifying Sectors... W 02:22:38 Miscompare at LBA: 1913761, Offset: 0 W 02:22:38 Device: 0x00 W 02:22:38 Image File: 0x06 W 02:22:38 Total Errors in Sector: 2,004 I 02:22:38 Verifying Sectors... W 02:22:39 Miscompare at LBA: 1913762, Offset: 0 W 02:22:39 Device: 0x00 W 02:22:39 Image File: 0x30 W 02:22:39 Total Errors in Sector: 362 I 02:22:39 Verifying Sectors... W 02:22:40 Miscompare at LBA: 1913764, Offset: 415 W 02:22:40 Device: 0x00 W 02:22:40 Image File: 0xCB W 02:22:40 Total Errors in Sector: 1,206 I 02:22:40 Verifying Sectors...
mmalves Posted July 18, 2010 Posted July 18, 2010 I 01:50:17 Destination Device: [2:2:0] TSSTcorp CDDVDW SH-S223C SB02 (D:) (SCSI)I 01:50:17 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x, 6x, 8x) I 01:50:17 Optimal L0 Data Zone Capacity: 1,913,760 I 01:50:17 Optimal L0 Data Zone Method: Copied From Original Disc I 01:50:41 Set L0 Data Zone Capacity Succeeded! (...) I 02:16:33 Source Media Type: DVD+R DL (Book Type: DVD+R DL) (Disc ID: RICOHJPN-d01-67) (Speeds: 4x) ImgBurn sends the set layerbreak command and then checks if it was correctly set, to which the burner answered OK: after this it depends entirely on the burner, its firmware and media support. The problem is that the blanks you're using are crap. Also notice that the booktype wasn't set to DVD-ROM, which not only ImgBurn does by default on Samsung burners, but the burner itself also does it. Update your burner's firmware and try burning at 6x or 8x. If that doesn't help then read this -> http://forum.imgburn.com/index.php?showtopic=8000
LIGHTNING UK! Posted July 18, 2010 Posted July 18, 2010 Also, what controller is your drive attached to? (motherboard chipset make/model please) Any particular reason you've stuck with XP SP2?
malinka123 Posted July 18, 2010 Author Posted July 18, 2010 Thank you very much! Book type auto was selected like this Book Type: DVD+R DL I thought it was OK since this was the media type, I did not realized I should change it. I will update firmware, get better disks, change book type and report results back. I really appreciate your help.
malinka123 Posted July 18, 2010 Author Posted July 18, 2010 Dear LIGHTNING UK! Thank you very much for your help! It is SATA of the Asus A8V-E SE, could not get update for firmware/ drivers for this. No particular reason to use XP, except that PC is old... Tried Vista did not work well. Never tried Win 7. Time to get better PC I would guess.
LIGHTNING UK! Posted July 18, 2010 Posted July 18, 2010 You shouldn't have to change the booktype, the program does it automatically but it's being blocked on your machine - probably due to to the drivers. I meant SP2 rather than the latest SP... which is SP3.
malinka123 Posted July 21, 2010 Author Posted July 21, 2010 OK guys, If you permit me I would like to share my experience that might be useful for other members. I Got the burner firmware updated. Executable model_***.exe (SH-S223C.exe in my case) with firmware did not work, showing message: "Can't find suitable drive for F/W" For other users of Samsung, the work around is to install full live update and run it Link is this: http://www.samsungodd.com/eng/Firmware/FAQ/Faq.asp This works smooth! Also got the drivers updated. Result with disc: (Disc ID: RICOHJPN-D01-67) was the same: Error on layer break. Mean time with new USB DVD-RW burner the same blank discs (same case even) are working just fine (several discs recorded, no fail) Exact info on burn-driver is this: I 22:52:55 -> Drive 3 - Info: SONY DVD RW DRX-S70U DJ07 (G:) (USB) So, I believe that Samsung burn-drive is "severely allergic" on RICOHJPN-D01-67 :-) Verbatim / Sony blank tests are pending tomorrow... Thank you a lot for useful and helpful hints. You are GREAT guys!!! As you sure already know, by now, from comments of other users of your SW. Best regards...
Cynthia Posted July 21, 2010 Posted July 21, 2010 Exact info on burn-driver is this: I 22:52:55 -> Drive 3 - Info: SONY DVD RW DRX-S70U DJ07 (G:) (USB) A rebadged Optiarc 7540A.
malinka123 Posted July 31, 2010 Author Posted July 31, 2010 Statistics with TSSTcorp CDDVDW SH-S223C SB01 Verbatim DVD+R DL x2.4 5 burns -> 5 (all) OK at write speed x2.4 Means Samsung burner is not that bad just needs some good blanks...
Cynthia Posted July 31, 2010 Posted July 31, 2010 Odd that the auto updater of firmware not installs the latest firmware.
Recommended Posts