Write speed faster than set

[thethreedwarves]

Hi,

 

I am trying to burn an .iso onto a dual layer dvd. Whenever I attempt to do this the write speed is constantly at about 4x no matter what I set it to. I need to reduce the burn speed since bits of the move are laggy and around the change over 2 whole scenes (out of 14) won't play at all.

 

The most relevant line from the log (as far as i can tell) is:

 

Write Speed Miscompare! - Wanted 1,385 KB/s (1x), Got: 5540 KB/s (4x)

 

this is after setting it to 1x.

 

Any help would be greatly appreciated.

 

 

here is the log:

 

 

I 16:15:37 ImgBurn Version 2.5.1.0 started!

I 16:15:37 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600)

I 16:15:37 Total Physical Memory: 4,192,760 KB - Available: 2,916,824 KB

I 16:15:37 Initialising SPTI...

I 16:15:37 Searching for SCSI / ATAPI devices...

I 16:15:37 -> Drive 1 - Info: TSSTcorp CDDVDW SH-S203N SB00 (K:) (ATA)

I 16:15:37 Found 1 DVD±RW/RAM!

I 16:31:24 Operation Started!

I 16:31:24 Source File: J:\My Videos\DVD\The Hurt Locker.MDS

I 16:31:24 Source File Sectors: 3,844,253 (MODE1/2048)

I 16:31:24 Source File Size: 7,873,030,144 bytes

I 16:31:24 Source File Volume Identifier: HURT_LOCKER

I 16:31:24 Source File Volume Set Identifier: 3b6b63d2

I 16:31:24 Source File Implementation Identifier: Sonic Scenarist 3.1

I 16:31:24 Source File File System(s): ISO9660, UDF (1.02)

I 16:31:24 Destination Device: [3:0:0] TSSTcorp CDDVDW SH-S203N SB00 (K:) (ATA)

I 16:31:24 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x, 6x, 8x)

I 16:31:24 Destination Media Sectors: 4,173,824

I 16:31:24 Write Mode: DVD

I 16:31:24 Write Type: DAO

I 16:31:24 Write Speed: 1x

I 16:31:24 Link Size: Auto

I 16:31:24 Lock Volume: Yes

I 16:31:24 Test Mode: No

I 16:31:24 OPC: No

I 16:31:24 BURN-Proof: Enabled

W 16:31:25 Write Speed Miscompare! - Wanted: 1,385 KB/s (1x), Got: 5,540 KB/s (4x)

I 16:31:25 Book Type Setting: DVD-ROM

I 16:31:25 Optimal L0 Data Zone Capacity: 1,952,992

I 16:31:25 Optimal L0 Data Zone Method: Copied From Original Disc

I 16:32:09 Set L0 Data Zone Capacity Succeeded!

I 16:32:09 Filling Buffer... (40 MB)

I 16:32:10 Writing LeadIn...

I 16:32:12 Writing Session 1 of 1... (1 Track, LBA: 0 - 3844252)

I 16:32:12 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3844252)

I 16:32:12 Writing Layer 0... (LBA: 0 - 1952991)

I 16:44:19 Writing Layer 1... (LBA: 1952992 - 3844252)

 

(will post the last bit in a min - trying a second time)

Edited July 28, 2010 by thethreedwarves

[LIGHTNING UK!]

I 16:31:24 Destination Device: [3:0:0] TSSTcorp CDDVDW SH-S203N SB00 (K:) (ATA)

I 16:31:24 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x, 6x, 8x)

 

The bits in bold are the speeds your drive/firmware support the 'RICOHJPN-D01-67' dye at.

 

Supported write speeds are always shown in the disc info panel on the right when there's a disc in the drive.

 

2.4x is the lowest speed the DVD+ (plus) format ever supported so 1x wouldn't really be an option on *any* drive.

 

You should update the firmware on your drive to SB02.

 

http://www.firmwarehq.com/Samsung/SH-S203N/files.html

[thethreedwarves]

Thanks for the reply.

 

I have updated the firmware and am trying again, however it still will not burn at any lower than 4x, guess I will just have to live with that.

 

I don't expect it will burn properly this time either, however will post the results.

 

 

Thanks for trying!

[grullone]

I 16:31:24 Destination Device: [3:0:0] TSSTcorp CDDVDW SH-S203N SB00 (K:) (ATA)

I 16:31:24 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x, 6x, 8x)

 

The bits in bold are the speeds your drive/firmware support the 'RICOHJPN-D01-67' dye at.

 

Supported write speeds are always shown in the disc info panel on the right when there's a disc in the drive.

 

2.4x is the lowest speed the DVD+ (plus) format ever supported so 1x wouldn't really be an option on *any* drive.

 

You should update the firmware on your drive to SB02.

 

http://www.firmwarehq.com/Samsung/SH-S203N/files.html

 

 

I am having the same trouble with ASUS DRW-22B2L and I wasted a lot od DVD+R DL cause I can't write them with speed less than 4 do you think it will be possible write slowly.

Here my log

 

Thank you in advance

log-for-nav.txt

[LIGHTNING UK!]

We don't do thread hijacking here. Make your own new thread please - as per the instructions in the pink box up the top.