LoneSky Posted September 10, 2010 Posted September 10, 2010 It is not often that I encounter a 'failed burn' attempt with ImgBurn. This one has left me a bit 'stumped' because I'm not exactly sure what/where the problem is. I have encountered this same problem before, trying to burn this very same DVD (an educational DVD given to me by a company. I'm just trying to burn a copy for a work colleague). Apart from the attached log, I would like to give, here, whatever other info so that whoever would like to help here may find this extra info useful. I have seen this same 'I/O Error' before: Device: (output DVD drive) (ATA) Scsi Status: 0x02 Interpretation: Check Condition CDB: 2A 00 00 02 85 20 00 00 20 00 Interpretation: Write(10) - Sectors 165152 - 165183 Sense Area: 70 00 06 00 00 00 00 10 00 00 00 0C 29 00 00 00 00 00 Interpretation: Power on, Reset, or BUs Device Reset Occurred There are 2 buttons to choose from: 'Retry' & 'Cancel'. IF I click 'Retry', the next windows asks: Would you like to perform the 'Close Track Session/Disc functions, even though the write operation appears to have failed? IF I choose "Yes", it leads to the above "I/O Error" message again. The original DVD I'm trying to copy is about 3.5 Gb & I am a using VERBATIM DVD-R 4.7Gb, 16X disc to burn onto. In the Log, there are a few lines containing the words "Cannot Write Medium - Incompatible Format". I would dearly love to know exactly what the problem(s) is. Thanxx a lot in advance for any help!
LoneSky Posted September 10, 2010 Author Posted September 10, 2010 It appears that my attached Log file is not visible (not sure why that is so)> I am re-attaching it here again (in a different format, WORD)FailedBurn (10.09.10).doc. Can someone let me know IF it is visible?
LIGHTNING UK! Posted September 10, 2010 Posted September 10, 2010 W 13:20:50 Failed to Write Sectors 165152 - 165183 - Reason: Power On, Reset, or Bus Device Reset Occurred That's most likely driver or hardware related. Either way, it shouldn't be happening and you don't want it happening! So has it just happened the once? If so, forget about it and just burn it again! p.s. Your drive is a million years old now and probably not that well suited to todays media.
LoneSky Posted September 10, 2010 Author Posted September 10, 2010 W 13:20:50 Failed to Write Sectors 165152 - 165183 - Reason: Power On, Reset, or Bus Device Reset Occurred That's most likely driver or hardware related. Either way, it shouldn't be happening and you don't want it happening! So has it just happened the once? If so, forget about it and just burn it again! p.s. Your drive is a million years old now and probably not that well suited to todays media. Hello Lightning, It has happened twice in a row with this particular educational DVD. (Surprisingly, it has NEVER happened with a commercial DVD (like a movie or something). So, is it likely that the 'disparity' is between the "format" in which this (older) DVD was produced & my burning DVD-Rom? Did the Log show any real clues as to what was the "Incompatible Format"? Thanxx again
Recommended Posts