Jevansent Posted October 2, 2010 Posted October 2, 2010 Hi, Just looking for some help. System config: System: Windows 7 64-bit Memory: 4gb ImgBurn 2.5.2.0 Drive: TSSTcorp DVD+-RW TS-T633A DW20 Media: CMC MAG. AM3 (Max Speed 8x) I have been attempting to burn single layer DVD-R without success. What would happen is that the burn would start, the speed will very slowly fluctuate up to 2.4x then drop down to 0x again and then start the fluctuating cycle all over again up to a max of 2.4x despite the media's rating of 8x. The net result is 50 minutes for a standard 4GB DVD-R burn, after which the verify completely fails with the message "Verify Failed! - Reason: Layouts do not match." The disc is then magically and frustatingly EMPTY on the disc info window in ImgBurn. I have used this media without issues before burning at 8x, this is from the same DVD spindle I bought. I am also able to burn DL DVD+R without issues. I would greatly appreciate any help I can get. The log file is as follows: I 15:43:58 ImgBurn Version 2.5.2.0 started! I 15:43:58 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 15:43:58 Total Physical Memory: 4,158,312 KB - Available: 2,943,812 KB I 15:43:58 Initialising SPTI... I 15:43:58 Searching for SCSI / ATAPI devices... I 15:44:00 -> Drive 1 - Info: TSSTcorp DVD+-RW TS-T633A DW20 (E:) (ATA) I 15:44:00 Found 1 DVD±RW/RAM! I 15:45:58 Operation Started! I 15:45:58 Source File: C:\ISO\SUPER MARIO GALAXY MORE.iso I 15:45:58 Source File Sectors: 2,294,912 (MODE1/2048) I 15:45:58 Source File Size: 4,699,979,776 bytes I 15:45:58 Source File Volume Identifier: SUPER MARIO GALAXY MORE I 15:45:58 Source File File System(s): Special I 15:45:58 Destination Device: [1:0:0] TSSTcorp DVD+-RW TS-T633A DW20 (E:) (ATA) I 15:45:58 Destination Media Type: DVD-R (Disc ID: CMC MAG. AM3) (Speeds: 3x, 4x, 6x, 8x) I 15:45:58 Destination Media Sectors: 2,298,496 I 15:45:58 Write Mode: DVD I 15:45:58 Write Type: DAO I 15:45:58 Write Speed: 8x I 15:45:58 Link Size: Auto I 15:45:58 Lock Volume: Yes I 15:45:58 Test Mode: No I 15:45:58 OPC: No I 15:45:58 BURN-Proof: Enabled I 15:45:58 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x) I 15:45:59 Filling Buffer... (40 MB) I 15:46:00 Writing LeadIn... I 15:46:39 Writing Session 1 of 1... (1 Track, LBA: 0 - 2294911) I 15:46:39 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2294911) I 16:35:50 Synchronising Cache... I 16:36:07 Exporting Graph Data... I 16:36:07 Graph Data File: C:\Users\Hao Zheng\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_DVD+-RW_TS-T633A_DW20_SATURDAY-2-OCTOBER-2010_3-45_PM_CMC_MAG._AM3_8x.ibg I 16:36:07 Export Successfully Completed! I 16:36:07 Operation Successfully Completed! - Duration: 00:50:09 I 16:36:07 Average Write Rate: 1,555 KB/s (1.1x) - Maximum Write Rate: 11,165 KB/s (8.1x) I 16:36:07 Cycling Tray before Verify... W 16:36:16 Waiting for device to become ready... I 16:36:33 Device Ready! E 16:36:33 Verify Failed! - Reason: Layouts do not match.
LIGHTNING UK! Posted October 2, 2010 Posted October 2, 2010 Did you try burning it a second/third time on a new disc? Your drive just messed up on that one. If it does the same again on a different disc, try cleaning the drive. Failing that, get some better media.
Recommended Posts