Strange problem freeze at leadin

[Get Verbs]

Hello all,

 

I got a problem I just cant solve..

U guys (and girls if they do burn) are my last hope.

I cant post a log and yes I use Verbs!

 

The problem is: my imgburn stops at writing leadin it just stays there the timers continue to count but it does nothing.

Only thing i can do is reboot because i cannot open the drive.

 

The weird thing is: I have burned like 10 copies allready, but the only way to do that is first burn a cd in mediaplayer and then imgburn works.

If I reboot my pc, imgburn does the same thing all over again and I have to burn a cd in mediaplayer again...

 

Help please:D

[Get Verbs]

Im using pioneer s18lbk burner btw

[LIGHTNING UK!]

You can copy + paste eveything from the log window up until the point where it gets stuck.

[Get Verbs]

When i get home i will. It states nothing special tough only thing it says is writing leadin... And nothing more

[Get Verbs]

I 15:09:34 ImgBurn Version 2.5.2.0 started!

I 15:09:34 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600)

I 15:09:34 Total Physical Memory: 982.456 KB - Available: 457.284 KB

W 15:09:34 Drive D:\ (FAT32) does not support single files > 4 GB in size.

I 15:09:34 Initialising SPTI...

I 15:09:34 Searching for SCSI / ATAPI devices...

I 15:09:34 -> Drive 1 - Info: PIONEER DVD-RW DVR-218L 1.02 (F:) (ATA)

I 15:09:34 -> Drive 2 - Info: TSSTcorp CD/DVDW TS-H652L 0803 (E:) (ATA)

I 15:09:34 -> Drive 3 - Info: WD Virtual CD 070B 1030 (L:) (USB)

I 15:09:34 Found 2 DVD±RW/RAMs and 1 Unknown!

I 15:09:49 Operation Started!

I 15:09:49 Source File: M:\Arthur\XBOX360\GAMES\CHECKED\Red Dead Redemption\rdr.dvd

I 15:09:49 Source File Sectors: 3.827.488 (MODE1/2048)

I 15:09:50 Source File Size: 7.838.695.424 bytes

I 15:09:50 Source File Volume Identifier: DVD_ROM

I 15:09:50 Source File Volume Set Identifier: ec67c000MS UDFBridge

I 15:09:50 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 15:09:50 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 15:09:50 Source File File System(s): ISO9660; UDF (1.50)

I 15:09:50 Destination Device: [3:0:0] PIONEER DVD-RW DVR-218L 1.02 (F:) (ATA)

I 15:09:50 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x; 6x; 8x; 10x)

I 15:09:50 Destination Media Sectors: 4.173.824

I 15:09:50 Write Mode: DVD

I 15:09:50 Write Type: DAO

I 15:09:50 Write Speed: 2,4x

I 15:09:50 Link Size: Auto

I 15:09:50 Lock Volume: Yes

I 15:09:50 Test Mode: No

I 15:09:50 OPC: No

I 15:09:50 BURN-Proof: Enabled

W 15:09:51 Write Speed Miscompare! - Wanted: 3.324 KB/s (2,4x), Got: 5.540 KB/s (4x)

I 15:09:51 Advanced Settings - Optimal Writing Speed: No

I 15:09:51 User Specified L0 Data Zone Capacity: 1.913.760

I 15:09:51 Set L0 Data Zone Capacity Succeeded!

I 15:09:52 Filling Buffer... (20 MB)

I 15:09:54 Writing LeadIn...

[Get Verbs]

device buffer stays 0% and i tried different speeds.

I wont go over 4x, thats impossible for me since xbox games cannot be burned higher then 4x

[ianymaty]

I wont go over 4x, thats impossible for me since xbox games cannot be burned higher then 4x

 

Says who? That was ages ago, but is not the case now with modern drives that are well tuned to burn at high speeds.

 

Go on, take your chance and try 8x. You are using 8x media after all.

[Get Verbs]

I will try that, but isnt that bad for the xbox 360 drive?

Thats what I heard

Edited November 19, 2010 by Get Verbs

[Cynthia]

A reader can not see how fast a disc was burned. The only thing it wants is the best possible burn = the most easily read disc.

[Get Verbs]

I 17:35:36 ImgBurn Version 2.5.2.0 started!

I 17:35:36 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600)

I 17:35:36 Total Physical Memory: 982.456 KB - Available: 527.028 KB

W 17:35:36 Drive D:\ (FAT32) does not support single files > 4 GB in size.

I 17:35:36 Initialising SPTI...

I 17:35:36 Searching for SCSI / ATAPI devices...

I 17:35:36 -> Drive 1 - Info: PIONEER DVD-RW DVR-218L 1.02 (F:) (ATA)

I 17:35:36 -> Drive 2 - Info: TSSTcorp CD/DVDW TS-H652L 0803 (E:) (ATA)

I 17:35:36 -> Drive 3 - Info: WD Virtual CD 070B 1030 (L:) (USB)

I 17:35:36 Found 2 DVD±RW/RAMs and 1 Unknown!

I 17:35:50 Operation Started!

I 17:35:50 Source File: M:\Arthur\XBOX360\GAMES\CHECKED\Red Dead Redemption\rdr.dvd

I 17:35:50 Source File Sectors: 3.827.488 (MODE1/2048)

I 17:35:51 Source File Size: 7.838.695.424 bytes

I 17:35:51 Source File Volume Identifier: DVD_ROM

I 17:35:51 Source File Volume Set Identifier: ec67c000MS UDFBridge

I 17:35:51 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 17:35:51 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 17:35:51 Source File File System(s): ISO9660; UDF (1.50)

I 17:35:51 Destination Device: [3:0:0] PIONEER DVD-RW DVR-218L 1.02 (F:) (ATA)

I 17:35:51 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x; 6x; 8x; 10x)

I 17:35:51 Destination Media Sectors: 4.173.824

I 17:35:51 Write Mode: DVD

I 17:35:51 Write Type: DAO

I 17:35:51 Write Speed: 8x

I 17:35:51 Link Size: Auto

I 17:35:51 Lock Volume: Yes

I 17:35:51 Test Mode: No

I 17:35:51 OPC: No

I 17:35:51 BURN-Proof: Enabled

I 17:35:52 Write Speed Successfully Set! - Effective: 11.080 KB/s (8x)

I 17:35:52 Advanced Settings - Optimal Writing Speed: No

I 17:35:52 User Specified L0 Data Zone Capacity: 1.913.760

I 17:35:52 Set L0 Data Zone Capacity Succeeded!

I 17:35:54 Filling Buffer... (20 MB)

I 17:35:55 Writing LeadIn...

 

Same with 8x speed, it's not the burner and not the media.. anyone

[Cynthia]

Those Verbatims - where are they made in?

[LIGHTNING UK!]

Try the drive in another PC with that same media.

 

If it's ok, it's probably driver related.

 

What motherboard/chipset do you have?

[Get Verbs]

Those Verbatims - where are they made in?

India, but i burned like 10 so shouldnt be the problem.

[Cynthia]

Those Verbatims - where are they made in?

India, but i burned like 10 so shouldnt be the problem.

Had a 10 pack spindle from India that was just crap. Can't say I trust those ones.

[Get Verbs]

Try the drive in another PC with that same media.

 

If it's ok, it's probably driver related.

 

What motherboard/chipset do you have?

Drivers, that's what I tought.

i have a screen made of my drivers for the pioneer maybe that helps.

 

and I have a pavillion t3610 mediacenter pc.

 

Chipset

ATI Radeon Xpress 200 for Intel Processors

Motherboard

•Fabrikant: ECS

•Name Motherboard: RC410-M

•Name HP/Compaq Motherboard: Asterope3-GL8E

 

 

I cannot try it on another machine i only have a laptop.

Edited November 19, 2010 by Get Verbs

[Get Verbs]

Anyone?

[LIGHTNING UK!]

Get that latest drivers from AMD and install them.

 

There's nothing we can do about your issue, you need to try some stuff yourself.

[Get Verbs]

I will try, thank you!

I have allready tried southbridge driver, but I dont know what that is. Didnt work either.