schall Posted October 17, 2005 Posted October 17, 2005 Some kind of fatal error happening on burn attempt. I burn ok with Nero, but I was looking into using this program as it appears to be light on resources. Anyway, does anyone know what this means? THanks ahead of time. I'm sorry I don't know too much... I 00:38:40 Operation Started! I 00:38:40 Source File: E:\anime\[Ani-Kraze]_Paranoia_Agent_01_-_13\Disk 1\Avi2dvd_temp\DVD_Image.iso I 00:38:40 Source File Sectors: 592,565 (MODE1/2048) I 00:38:40 Source File Size: 1,213,573,120 bytes I 00:38:40 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR © 1993 E.YOUNGDALE © 1997 J.PEARSON/J.SCHILLING I 00:38:40 Source File Implementation Identifier: mkisofs I 00:38:40 Destination Device: [0:2:0] BENQ DVD DD DW1620 B7P9 (D:) (ATA) I 00:38:40 Destination Media Type: DVD-R (Disc ID: CMC MAG. AE1) (Speeds: 2.4x, 4x, 8x, 12x) I 00:38:40 Destination Media Sectors: 2,298,496 I 00:38:40 Write Mode: DVD I 00:38:40 Write Type: DAO I 00:38:40 Write Speed: MAX I 00:38:40 Link Size: Auto I 00:38:40 Test Mode: No I 00:38:40 BURN-Proof: Enabled E 00:40:15 Failed to Reserve Track! - Incompatible Medium Installed E 00:40:16 Operation Failed! - Duration: 00:01:36 I 00:40:16 Average Write Rate: N/A - Maximum Write Rate: N/A thanks
lfcrule1972 Posted October 17, 2005 Posted October 17, 2005 (edited) I 00:38:40 Destination Media Type: DVD-R (Disc ID: CMC MAG. AE1) (Speeds: 2.4x, 4x, 8x, 12x)E 00:40:15 Failed to Reserve Track! - Incompatible Medium Installed E 00:40:16 Operation Failed! - Duration: 00:01:36 I 00:40:16 Average Write Rate: N/A - Maximum Write Rate: N/A thanks Does Nero burn these discs ok ? If you have been around these forums and its predecessor a while you may have seen a lot of problems with the dye on the discs your using ! CMC MAG make just about the crappiest most unreliable dye out there..... From the message above it appears that your drive doesn't like the discs - I use Grade A Ritek G05 dye as well as Taiyo Yudens and don't have the problem your getting. My advice is to change the dye/discs and try again..... Edited October 17, 2005 by lfcrule1972
LIGHTNING UK! Posted October 17, 2005 Posted October 17, 2005 Try newer firmware too. http://forum.rpc1.org/dl_firmware.php?download_id=1905
Grain Posted October 17, 2005 Posted October 17, 2005 I bot 2 spindles of Maxell 8X -R's on the weekend. One spindles media code was RITEKG05, good enough, but the other was CMCMAGAE1 ! I'm in the process of making a lot of noise with Maxell. After a phone call I can mail them off for an exchange, but I'm waiting for an explanation, if I don't get a satisfactory answer, they will be going on my Shite List. Unfortunate that a decent company has to stoop to selling shit products.
lfcrule1972 Posted October 18, 2005 Posted October 18, 2005 Happens all the time Grain - good media turns to shite when the Companies decide to increase their profits by using crap dyes
avman Posted October 24, 2005 Posted October 24, 2005 (edited) Hi, i've got a little problem with imageburn. Lg 4160b, A306 firmware >> with 8x speed on: TDK (TTG02 ), platinum (ricoh jpn r02), verbatim (TYG02), write 96% and error message: I/O read or write (? i cant remember) error and (i think the windows say W 19:56:59 Failed to Write Sectors 2196640 - 2196671 - Tracking Servo Failure (imgburn says) sorry, but a forget install hypersnap or other program as yet write this disc types with nero, alcohol, decrypter (!) on 8x speed: no problem and write 4x speed with imgburn also no problem Edited October 24, 2005 by avman
lfcrule1972 Posted October 25, 2005 Posted October 25, 2005 Hey corn - my last 50 of full face printable Ritek G05s are shite, first 10 discs all failed to verify at pretty much 50% each time. Rubbish - have just sent a mail to SVP to see what they say.....
cornholio7 Posted October 25, 2005 Posted October 25, 2005 i'm having some problems with them too mate my plextor sees them as 4x discs whilst my nec sees them as 8x
Grain Posted October 25, 2005 Posted October 25, 2005 My last Ritek G05's are showing 4X on the NEC3520, 8X on the Plextor
lfcrule1972 Posted October 26, 2005 Posted October 26, 2005 I have decided to ditch the riteks for a while - too annoying when 2x lots of 50 spindles are full or errors. The place I got them from are kindly exchanging them for 50 8x TY's !!! Looks like I will be buying the spindle of 100 TYs in future now...
volvofl10 Posted October 26, 2005 Posted October 26, 2005 (edited) i have to be honest , i have stuck with TY 8x for over 18 months now, and the only failures have been in the write process, these amounting to less than 5 in over 350 discs ( about 1.4% ?) i know they are more expensive, and harder to get ( in some countries) than otehr brands , but i havent bought any other brand for over 18 months .i dont even buy other brands that use the TY dye in them , just the original type i would strongly recomend the use of Taiyo Yuden 8x full face printable {DV3139 at svp} as they seem to have been very stable and reliable for oevr 18 months now.( cant speak for the later 16x rated ones) i did use ritek till 8x discs was available, but even they was patchy at the time , and there 8x was just hit and miss for me >preaching mode over< Edited October 26, 2005 by volvofl10
Grain Posted October 27, 2005 Posted October 27, 2005 I bot 2 spindles of Maxell 8X -R's on the weekend. One spindles media code was RITEKG05, good enough, but the other was CMCMAGAE1 ! I'm in the process of making a lot of noise with Maxell. After a phone call I can mail them off for an exchange, but I'm waiting for an explanation, if I don't get a satisfactory answer, they will be going on my Shite List. Unfortunate that a decent company has to stoop to selling shit products. Welcome to my SHIT LIST Maxell! Maxell is of the opinion that CMCMag media is of a HQ nature and they will only replace defective media, not unburned ones. I couldn't be bothered to harse about with shite discs, so I now have 50 nice gold Maxell coasters, and I will no longer buy squat fuck from them.
polopony Posted November 5, 2005 Posted November 5, 2005 I bot 2 spindles of Maxell 8X -R's on the weekend. One spindles media code was RITEKG05, good enough, but the other was CMCMAGAE1 ! I'm in the process of making a lot of noise with Maxell. After a phone call I can mail them off for an exchange, but I'm waiting for an explanation, if I don't get a satisfactory answer, they will be going on my Shite List. Unfortunate that a decent company has to stoop to selling shit products. Welcome to my SHIT LIST Maxell! Maxell is of the opinion that CMCMag media is of a HQ nature and they will only replace defective media, not unburned ones. I couldn't be bothered to harse about with shite discs, so I now have 50 nice gold Maxell coasters, and I will no longer buy squat fuck from them. you should let them know in no uncertain terms I think "Squat Fuck " covers it nicely
blutach Posted November 10, 2005 Posted November 10, 2005 Gee that's real bad. And I wouldn't have accepted the G05's either Grain given their history. They stop making MXL MIDs??? Here, Ritek R03s have given me 100% success and Verbatim DLs the same. Regards
lfcrule1972 Posted November 11, 2005 Posted November 11, 2005 Verb DL's have been great for me too..... Since I began using the TY's I was sent as replacement for the G05s I have not had a single bad burn - they are great, 99% of the time they max at 8.3x and verify faster. Great discs - deffo gonna order 100 of them next time.
Grain Posted November 15, 2005 Posted November 15, 2005 MAXELL REP.Any company that is producing our product has to comform to our standards. A Maxell CMCMAGAE1. They obviously have very low standards.
Recommended Posts