camarokenny67 Posted April 20, 2011 Posted April 20, 2011 what is the problem? i have been using the exact same everything for quite some time and i get these error messages . one out of 5 turn out ok in the last week (10 in all). the source of the iso says its good the program i use to check the iso says its good and so on but i get this 4 out of 5 times . never had a problem (other then when i first started) like this and i burn disks weekly almost daily sometimes I 02:00:00 ImgBurn Version 2.5.5.0 started! I 02:00:00 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1) I 02:00:00 Total Physical Memory: 2,612,408 KB - Available: 1,028,796 KB I 02:00:00 Initialising SPTI... I 02:00:00 Searching for SCSI / ATAPI devices... I 02:00:00 -> Drive 1 - Info: DTSOFT BDROM 1.05 (J:) (Virtual) I 02:00:00 -> Drive 2 - Info: ATAPI iHES208 2 8L05 (F:) (ATA) I 02:00:00 -> Drive 3 - Info: ELBY CLONEDRIVE 1.4 (I:) (SCSI) I 02:00:00 Found 1 BD-ROM, 1 BD-ROM/HD DVD-ROM and 1 BD-ROM/DVD±RW! I 02:00:31 Operation Started! I 02:00:31 Source File: H:\erg\******************\mvl-p2p2.dvd I 02:00:31 Source File Sectors: 3,827,488 (MODE1/2048) I 02:00:31 Source File Size: 7,838,695,424 bytes I 02:00:31 Source File Volume Identifier: DVD_ROM I 02:00:31 Source File Volume Set Identifier: d0a44000MS UDFBridge I 02:00:31 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 02:00:31 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 02:00:31 Source File File System(s): ISO9660, UDF (1.50) I 02:00:31 Destination Device: [3:0:0] ATAPI iHES208 2 8L05 (F:) (ATA) I 02:00:31 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 4x, 6x) I 02:00:31 Destination Media Sectors: 4,173,824 I 02:00:31 Write Mode: DVD I 02:00:31 Write Type: DAO I 02:00:31 Write Speed: 2.4x I 02:00:31 Link Size: Auto I 02:00:31 Lock Volume: Yes I 02:00:31 Test Mode: No I 02:00:31 OPC: No I 02:00:31 BURN-Proof: Enabled W 02:00:34 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 5,540 KB/s (4x) I 02:00:34 Book Type Setting: DVD-ROM I 02:00:34 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes I 02:00:34 Optimal L0 Data Zone Capacity: 1,913,760 I 02:00:34 Optimal L0 Data Zone Method: Copied From Original Disc I 02:00:53 Set L0 Data Zone Capacity Succeeded! I 02:00:56 Filling Buffer... (40 MB) I 02:00:56 Writing LeadIn... I 02:00:57 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 02:00:57 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 02:00:57 Writing Layer 0... (LBA: 0 - 1913759) W 02:11:05 Failed to Write Sectors 1646336 - 1646367 - Reason: Write Error W 02:11:05 Retrying (1 of 20)... W 02:11:06 Retry Failed - Reason: Invalid Address For Write W 02:11:06 Retrying (2 of 20)... W 02:11:06 Retry Failed - Reason: Invalid Address For Write W 02:11:06 Retrying (3 of 20)... W 02:11:06 Retry Failed - Reason: Invalid Address For Write W 02:11:06 Retrying (4 of 20)... W 02:11:06 Retry Failed - Reason: Invalid Address For Write W 02:11:06 Retrying (5 of 20)... W 02:11:06 Retry Failed - Reason: Invalid Address For Write W 02:11:06 Retrying (6 of 20)... W 02:11:06 Retry Failed - Reason: Invalid Address For Write W 02:11:06 Retrying (7 of 20)... W 02:11:06 Retry Failed - Reason: Invalid Address For Write W 02:11:06 Retrying (8 of 20)... W 02:11:06 Retry Failed - Reason: Invalid Address For Write W 02:11:06 Retrying (9 of 20)... W 02:11:06 Retry Failed - Reason: Invalid Address For Write W 02:11:06 Retrying (10 of 20)... W 02:11:07 Retry Failed - Reason: Invalid Address For Write W 02:11:07 Retrying (11 of 20)... W 02:11:07 Retry Failed - Reason: Invalid Address For Write W 02:11:07 Retrying (12 of 20)... W 02:11:07 Retry Failed - Reason: Invalid Address For Write W 02:11:07 Retrying (13 of 20)... W 02:11:07 Retry Failed - Reason: Invalid Address For Write W 02:11:07 Retrying (14 of 20)... W 02:11:07 Retry Failed - Reason: Invalid Address For Write W 02:11:07 Retrying (15 of 20)... W 02:11:07 Retry Failed - Reason: Invalid Address For Write W 02:11:07 Retrying (16 of 20)... W 02:11:07 Retry Failed - Reason: Invalid Address For Write W 02:11:07 Retrying (17 of 20)... W 02:11:07 Retry Failed - Reason: Invalid Address For Write W 02:11:07 Retrying (18 of 20)... W 02:11:07 Retry Failed - Reason: Invalid Address For Write W 02:11:07 Retrying (19 of 20)... W 02:11:07 Retry Failed - Reason: Invalid Address For Write W 02:11:07 Retrying (20 of 20)... W 02:11:07 Retry Failed - Reason: Invalid Address For Write E 07:57:19 Failed to Write Sectors 1646336 - 1646367 - Reason: Write Error E 07:57:19 Next Writable Address: 1645728 I 07:57:19 Synchronising Cache... W 07:57:22 User opted to skip the 'Close Track/Session/Disc' functions. E 07:57:22 Failed to Write Image! I 07:57:24 Exporting Graph Data... I 07:57:24 Graph Data File: C:\Users\*****\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHES208_2_8L05_WEDNESDAY-APRIL-20-2011_2-00_AM_RITEK-S04-66_2.4x.ibg I 07:57:24 Export Successfully Completed! E 07:57:24 Operation Failed! - Duration: 05:56:51 I 07:57:24 Average Write Rate: 153 KB/s (0.1x) - Maximum Write Rate: 5,686 KB/s (4.1x)
LIGHTNING UK! Posted April 20, 2011 Posted April 20, 2011 Update the firmware on your drive. http://www.firmwarehq.com/Lite-On/iHES208%2B2/files.html Read this: http://forum.imgburn.com/index.php?showtopic=8000
camarokenny67 Posted April 21, 2011 Author Posted April 21, 2011 hi and thanks so much for the reply.... i am grateful, truly but as much as i absolutely hate to admit it i found the problem ....but first i would like to say i had already tried the update for the liteon. i had tried many things including holding my breath . but i the truth is i was using memorex disks . halfway through the stack something happened some where ... i had been using memorex for over a year ... so i thought it couldn't be them. i thought wrong i went and bought a 5 pack for 15 fricken dollars tried one out on a iso that had failed numerous times before knowing that it was going to fail again and this had no chance of working , i mean there is not many things that people need a dual layer dvd for in the first place and it was 40 dollars for 50 disks in the first place now im paying 30 dollars for 20 but i have not had one coaster, NOT ONE. despite my best efforts all i did was ,as a last resort mainly cuz im cheap, buy the disk put it in and burned it and bam i was back in business . thanks everyone . and to the future skeptics like me spring for the VERBATIM
dbminter Posted April 22, 2011 Posted April 22, 2011 Verbs or Taiyo Yuden. Just don't buy Verb CD-R's. Even Verbatim is not above stooping to CMC cheap media for some of its products. As long as the MID of the discs says MKM, you'll be all right. I just hope Verb doesn't stoop to using CMC for any of its DVD products.
Recommended Posts