Ashutosh Rathore Posted May 19, 2011 Posted May 19, 2011 ImgBurn is a nice app no doubt I'd burned more than 100 DVDs and CDs with it,but recently it started to show some freaky error maybe this error occurred after I reformatted my system...This error shook me up!! I tried to burn DVDs below 24x but that didn't solve my problem.I also tried to burn DVDs and CDs on 1x,2x,2.4x,5x but all was waste.Now I am very frustrated God damn someone help me out :0 Heres a log of Imgburn during the burning process.. I 18:18:54 Initialising SPTI... I 18:18:54 Searching for SCSI / ATAPI devices... I 18:18:54 -> Drive 1 - Info: HL-DT-ST DVD-RAM GH22NP20 1.02 (F:) (ATA) I 18:18:54 Found 1 DVD±RW/RAM! I 18:19:27 Operation Started! I 18:19:27 Source File: C:\Documents and Settings\Ashutosh Rathore\Desktop\PES2011.ISO I 18:19:27 Source File Sectors: 1,152,512 (MODE1/2048) I 18:19:27 Source File Size: 2,360,344,576 bytes I 18:19:27 Source File Volume Identifier: PES2011 I 18:19:27 Source File Volume Set Identifier: 5>=:?2=3SCEI I 18:19:27 Source File Application Identifier: PLAYSTATION I 18:19:27 Source File Implementation Identifier: DVD-ROM GENERATOR I 18:19:27 Source File File System(s): ISO9660, UDF (1.02) I 18:19:27 Destination Device: [0:1:0] HL-DT-ST DVD-RAM GH22NP20 1.02 (F:) (ATA) I 18:19:27 Destination Media Type: DVD-R (Disc ID: MBI 01RG40) (Speeds: 4x, 8x, 12x, 16x) I 18:19:27 Destination Media Sectors: 2,297,888 I 18:19:27 Write Mode: DVD I 18:19:27 Write Type: DAO I 18:19:27 Write Speed: MAX I 18:19:27 Link Size: Auto I 18:19:27 Lock Volume: Yes I 18:19:27 Test Mode: No I 18:19:27 OPC: No I 18:19:27 BURN-Proof: Enabled I 18:19:27 Write Speed Successfully Set! - Effective: 22,160 KB/s (16x) I 18:19:27 Filling Buffer... (40 MB) I 18:19:38 Writing LeadIn... W 18:19:50 Failed to Write Sectors 0 - 31 - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 18:19:50 Retrying (1 of 20)... I 18:19:59 Abort Request Acknowledged
mmalves Posted May 19, 2011 Posted May 19, 2011 http://lmgtfy.com/?q=site%3Aforum.imgburn.com+Logical+Unit+Communication+CRC+Error+(ULTRA-DMA%2F32)
ianymaty Posted May 19, 2011 Posted May 19, 2011 There's a later firmware for your drive (2.00), currently you have (1.02) installed http://www.firmwarehq.com/LG/GH22NP20/files.html
mmalves Posted May 19, 2011 Posted May 19, 2011 Flashing firmware when there's a communication problem between the burner and the system could easily brick (technical term ) the burner, so only do it after solving the problem.
ianymaty Posted May 19, 2011 Posted May 19, 2011 I should have mentioned that in my post to flash it after the communication problem was solved. Sorry
Ashutosh Rathore Posted May 20, 2011 Author Posted May 20, 2011 Okay!! How will i resolve this problem...I have seen all the previous posts related to this problem but am not getting to to resolve it.SO please help me out.
LIGHTNING UK! Posted May 20, 2011 Posted May 20, 2011 The error you're getting has been covered loads of times. Go back to the link in post # 2 and read the search results.
Ashutosh Rathore Posted May 20, 2011 Author Posted May 20, 2011 Well I do that but i am not getting how to solve it.In many posts you have said that check the cable,check whether the drive is set on master etc etc..frankly speaking I did not know how to check these...
mmalves Posted May 20, 2011 Posted May 20, 2011 Run SIW, go to Hardware -> Motherboard, select all the lines on the right and copy/paste them here. Alternatively, you could try using this website to look for new drivers for your system devices. If newer drivers don't solve your problem then you'll need to learn how to check cables/master-slave jumper/etc or ask someone to do it for you.
Ashutosh Rathore Posted May 21, 2011 Author Posted May 21, 2011 SIW Report: Property Value ASHU (Kobian PI945GCM) Summary Manufacturer Kobian Model PI945GCM Version ECS Serial Number [unknown] Bridge North Bridge Intel i945G Revision A2 South Bridge Intel 82801GB (ICH7/R) Revision A1 CPU Name Intel(R) Celeron(R) CPU 420 @ 1.60GHz Cpu Socket Socket 775 LGA Max CPU Speed 1600 MHz Memory Maximum Capacity 4096 MBytes Maximum Memory Module Size 4096 MBytes Memory Slots 4 Memory Type DDR2 System Slots ISA 0 PCI 0 AGP 0 VL-BUS 0 EISA 0 PCMCIA 0 ExpressCard 0 MCA 0 All drivers are current...but most of 'em are not digitally signed
cornholio7 Posted May 21, 2011 Posted May 21, 2011 http://www.intel.com/p/en_US/support/detect/?iid=dc_iduu try going here and run the intel driver update utility, click on 'check your system for the latest updates' and it should tell you what you need otherwise as mmalves stated above you'll need to learn how to check cables/master-slave jumper/etc or ask someone to do it for you
Ashutosh Rathore Posted May 22, 2011 Author Posted May 22, 2011 All drivers are current...but I said previously not all drivers are digitally signed as drivers related to IDE are not digitally signed.
mmalves Posted May 22, 2011 Posted May 22, 2011 Boot into safe mode and try burning a DVD-R with Test Mode enabled, so as to not actually write the disc but simulate the burn process. Does it work this way? Please post the log.
Ashutosh Rathore Posted May 23, 2011 Author Posted May 23, 2011 Okay i will do it and post the log here...
Ashutosh Rathore Posted May 27, 2011 Author Posted May 27, 2011 Sorry for the late reply.. Well this week i tried my luck and on my own risks do these things: 1. Checked the tape like belt connected with CD ROM and mother board.. 2. Checked the jumpers situated at the CD ROM drive...the jumper was at the middle i shifted it to the right most.. But these thing doesnt solve my problem before doing these thing I burned a image in safemode THe following was the log: I 16:30:11 ImgBurn Version 2.5.5.0 started! I 16:30:11 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 16:30:11 Total Physical Memory: 1,039,668 KB - Available: 607,852 KB I 16:30:11 Initialising SPTI... I 16:30:11 Searching for SCSI / ATAPI devices... I 16:30:11 -> Drive 1 - Info: HL-DT-ST DVD-RAM GH22NP20 1.02 (F:) (ATA) I 16:30:11 -> Drive 2 - Info: MagicISO Virtual DVD-ROM 1.0A (H:) (Unknown) I 16:30:11 Found 1 DVD-ROM and 1 DVD±RW/RAM! I 16:30:28 Operation Started! I 16:30:28 Source File: C:\Documents and Settings\Ashutosh Rathore\My Documents\Downloads\Compressed\HDLOADER8C.cue I 16:30:28 Source File Sectors: 13,127 (MODE2/FORM1/2352) I 16:30:28 Source File Size: 30,874,704 bytes I 16:30:28 Source File Volume Identifier: MODE2CD I 16:30:28 Source File File System(s): ISO9660 I 16:30:28 Destination Device: [0:1:0] HL-DT-ST DVD-RAM GH22NP20 1.02 (F:) (ATA) I 16:30:28 Destination Media Type: CD-R (Disc ID: 97m27s18f, Plasmon Data Systems) (Speeds: 16x, 24x, 40x, 48x) I 16:30:28 Destination Media Sectors: 359,847 I 16:30:28 Write Mode: CD I 16:30:28 Write Type: SAO I 16:30:28 Write Speed: 2x I 16:30:28 Lock Volume: Yes I 16:30:28 Test Mode: Yes I 16:30:28 OPC: No I 16:30:28 BURN-Proof: Enabled W 16:30:28 Write Speed Miscompare! - Wanted: 353 KB/s (2x), Got: 2,822 KB/s (16x) I 16:30:28 Filling Buffer... (40 MB) I 16:30:28 Writing LeadIn... W 16:30:58 Failed to Write Sectors -42 - -16 - Reason: Timeout on Logical Unit W 16:30:58 Retrying (1 of 20)... I 16:30:58 Writing LeadIn... W 16:30:58 Failed to Write Sectors -15 - -1 - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:30:58 Retrying (1 of 20)... I 16:30:58 Writing LeadIn... W 16:30:58 Failed to Write Sectors 0 - 26 - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:30:58 Retrying (1 of 20)... W 16:30:58 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:30:58 Retrying (2 of 20)... W 16:30:58 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:30:58 Retrying (3 of 20)... W 16:30:58 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:30:58 Retrying (4 of 20)... W 16:31:28 Retry Failed - Reason: Timeout on Logical Unit W 16:31:28 Retrying (5 of 20)... W 16:31:28 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:31:28 Retrying (6 of 20)... W 16:31:58 Retry Failed - Reason: Timeout on Logical Unit W 16:31:58 Retrying (7 of 20)... W 16:31:58 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:31:58 Retrying (8 of 20)... W 16:31:58 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:31:58 Retrying (9 of 20)... W 16:32:28 Retry Failed - Reason: Timeout on Logical Unit W 16:32:28 Retrying (10 of 20)... W 16:32:28 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:32:28 Retrying (11 of 20)... W 16:33:10 Retry Failed - Reason: Timeout on Logical Unit W 16:33:10 Retrying (12 of 20)... W 16:33:10 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:33:10 Retrying (13 of 20)... W 16:33:40 Retry Failed - Reason: Timeout on Logical Unit W 16:33:40 Retrying (14 of 20)... W 16:33:40 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:33:40 Retrying (15 of 20)... W 16:34:10 Retry Failed - Reason: Timeout on Logical Unit W 16:34:10 Retrying (16 of 20)... W 16:34:10 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:34:10 Retrying (17 of 20)... W 16:34:40 Retry Failed - Reason: Timeout on Logical Unit W 16:34:40 Retrying (18 of 20)... W 16:34:40 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:34:40 Retrying (19 of 20)... W 16:34:40 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:34:40 Retrying (20 of 20)... W 16:34:40 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:36:14 Retrying (21)... W 16:36:14 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:36:14 Retrying (22)... W 16:36:14 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:36:15 Retrying (23)... W 16:36:15 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) E 16:36:17 Failed to Write Sectors 0 - 26 - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) I 16:36:17 Synchronising Cache... W 16:36:18 Potential 'WaitImmediateIO' Deferred Error - (1/3) - Track Following Error W 16:36:18 Synchronise Cache Failed! - Reason: Track Following Error W 16:36:18 Retrying (1 of 3)... W 16:36:21 User opted to skip the 'Close Track/Session/Disc' functions. E 16:36:21 Failed to Write Image! E 16:36:29 Operation Failed! - Duration: 00:05:53 I 16:36:29 Average Write Rate: N/A - Maximum Write Rate: N/A
LIGHTNING UK! Posted May 27, 2011 Posted May 27, 2011 Have you tried replacing the cable for a decent new 80 wire one? If not, do so. If you only have 1 drive (the burner) on the cable, make sure you configure the jumpers to 'Master' on the back of the drive. You want the motherboard connected at one end of the cable and the drive at the opposite end - leaving one blank connector in the middle.
Ashutosh Rathore Posted May 27, 2011 Author Posted May 27, 2011 Have you tried replacing the cable for a decent new 80 wire one? If not, do so. If you only have 1 drive (the burner) on the cable, make sure you configure the jumpers to 'Master' on the back of the drive. You want the motherboard connected at one end of the cable and the drive at the opposite end - leaving one blank connector in the middle. I think my cable is 80 with lots of wire... And its also new... The jumpers are set to master..
LIGHTNING UK! Posted May 27, 2011 Posted May 27, 2011 ok well you need to try another one anyway. Get a new 80 wire IDE cable and make sure it's as short as possible. Do you only have the 1 drive on that cable?
Ashutosh Rathore Posted May 28, 2011 Author Posted May 28, 2011 Okay.. Yes only one drive My CD\DVD rom..
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now