brainiac Posted June 6, 2011 Posted June 6, 2011 Hello all. I've been using ImgBurn awhile now, and currently using the latest version 2.5.5.0 Yesterday was still okay, but today I'm having problem burning. I'm using Windows 7 Pro 64-bit, LG GH22NS50 drive and HP DVD+R media. Is my LG drive bad and needs replacing? Thanks in advance for advice and help. Time Remaining: Unknown <---------- (Unknown while burning) I 13:31:10 ImgBurn Version 2.5.5.0 started! I 13:31:10 Microsoft Windows 7 Professional x64 Edition (6.1, Build 7600) I 13:31:10 Total Physical Memory: 8,368,072 KB - Available: 7,000,488 KB I 13:31:10 Initialising SPTI... I 13:31:10 Searching for SCSI / ATAPI devices... I 13:31:10 -> Drive 1 - Info: HL-DT-ST DVDRAM GH22NS50 TN03 (I:) (ATAPI) E 13:31:10 Failed to check for ImgBurn update! I 13:31:10 -> Drive 2 - Info: HL-DT-ST DVDRAM GH24NS50 XP02 (J:) (ATAPI) I 13:31:10 Found 2 DVD±RW/RAMs! I 13:38:32 Operation Started! I 13:38:32 Source File: E:\ISO\SAMPLE.ISO I 13:38:32 Source File Sectors: 1,831,232 (MODE1/2048) I 13:38:32 Source File Size: 3,750,363,136 bytes I 13:38:32 Source File Volume Identifier: SAMPLE I 13:38:32 Source File Volume Set Identifier: 3EC63653001BF128 I 13:38:32 Source File Application Identifier: IMGBURN V2.5.5.0 - THE ULTIMATE IMAGE BURNER! I 13:38:32 Source File Implementation Identifier: ImgBurn I 13:38:32 Source File File System(s): ISO9660, UDF (1.02) I 13:38:32 Destination Device: [0:2:0] HL-DT-ST DVDRAM GH22NS50 TN03 (I:) (ATAPI) I 13:38:32 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 4x, 8x, 12x, 16x) I 13:38:32 Destination Media Sectors: 2,295,104 I 13:38:32 Write Mode: DVD I 13:38:32 Write Type: DAO I 13:38:32 Write Speed: MAX I 13:38:32 DVD+R Reserve Track: No I 13:38:32 Link Size: Auto I 13:38:32 Lock Volume: Yes I 13:38:32 Test Mode: No I 13:38:32 OPC: No I 13:38:32 BURN-Proof: Enabled I 13:38:32 Write Speed Successfully Set! - Effective: 22,160 KB/s (16x) I 13:38:32 Book Type Setting: DVD-ROM I 13:38:33 Filling Buffer... (40 MB) I 13:38:33 Writing LeadIn... I 13:38:55 Writing Session 1 of 1... (1 Track, LBA: 0 - 1831231) I 13:38:55 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 1831231) W 13:44:34 Failed to Write Sectors 391840 - 391871 - Reason: The request could not be performed because of an I/O device error. W 13:44:34 Retrying (1 of 20)... I 13:44:34 Writing Sectors... W 13:50:34 Failed to Write Sectors 1468192 - 1468223 - Reason: The request could not be performed because of an I/O device error. W 13:50:34 Retrying (1 of 20)... I 13:50:34 Writing Sectors... I 13:51:15 Synchronising Cache... I 13:51:16 Closing Track... I 13:51:23 Finalising Disc... I 13:51:54 Exporting Graph Data... I 13:51:54 Graph Data File: C:\Users\admin01\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GH22NS50_TN03_MONDAY-JUNE-06-2011_1-38_PM_CMC_MAG-M01-00_MAX.ibg I 13:51:54 Export Successfully Completed! I 13:51:54 Operation Successfully Completed! - Duration: 00:13:21 I 13:51:54 Average Write Rate: 4,955 KB/s (3.6x) - Maximum Write Rate: 20,874 KB/s (15.1x)
LIGHTNING UK! Posted June 6, 2011 Posted June 6, 2011 That error is from your controller drivers - potentially masking a real error from the drive. What chipset does your board use? What controller is the drive attached to? Try burning at 8x, you'll have more chance of getting a decent burn. 'CMC MAG-M01-00' isn't a dye we'd associate with decent discs.
brainiac Posted June 6, 2011 Author Posted June 6, 2011 That error is from your controller drivers - potentially masking a real error from the drive. What chipset does your board use? What controller is the drive attached to? Try burning at 8x, you'll have more chance of getting a decent burn. 'CMC MAG-M01-00' isn't a dye we'd associate with decent discs. Hi LUK I'm using an Intel DH67BL mainboard Mainboard Photo http://www.intel.com/Assets/Image/prodlarge/DH67BL_lg.jpg Mainboard Overview http://www.intel.com/products/desktop/motherboards/db-DH67BL/DH67BL-overview.htm The mainboard supports Intel Rapid Storage Technology for RAID 0,1,5 and 10. But I don't use RAID, should I still install the drivers to the system? It uses the Intel H67 Express Chipset. The harddisks are connected to the 2 blue SATA controller of the mainboard. The 2 LG drives are connected to the 2 black SATA controller of the mainboard. There is one red SATA controller with no device connected. I've been using HP DVD+R due to its lower costs. OK I'll try to burn at 8X. Thank you.
LIGHTNING UK! Posted June 6, 2011 Posted June 6, 2011 Yeah, try installing the Rapid Storage Tech driver from here - http://downloadcenter.intel.com/Detail_Desc.aspx?ProductID=3334&DwnldID=20023&lang=eng&iid=dc_rss You should put that on if the controller is in AHCI or RAID mode. I think it'll say it's not required if you aren't in either of those two modes.
brainiac Posted June 6, 2011 Author Posted June 6, 2011 Yeah, try installing the Rapid Storage Tech driver from here - http://downloadcenter.intel.com/Detail_Desc.aspx?ProductID=3334&DwnldID=20023&lang=eng&iid=dc_rss You should put that on if the controller is in AHCI or RAID mode. I think it'll say it's not required if you aren't in either of those two modes. Hi LUK! I've installed the Rapid Storage Tech driver. This also provides system status of both harddisks and ATAPI devices. Currently system is functioning properly. Originally I was thinking of reinstalling Win 7, good thing I came to this forum first. Thank you. About the media "CMC MAG-M01-00" dye being not decent, you were right. I've tried a different batch from the same brand and burning was without problems. I guess the dye has a stability issue. Thank you.
Rincewind Posted June 6, 2011 Posted June 6, 2011 You are not yet running SP1 for Win7, you might want to consider downloading that as well. http://windows.microsoft.com/en-US/windows/downloads/service-packs
brainiac Posted June 6, 2011 Author Posted June 6, 2011 You are not yet running SP1 for Win7, you might want to consider downloading that as well. http://windows.microsoft.com/en-US/windows/downloads/service-packs Thank you Rincewind, I'll look into this Win 7 SP1 also. Many thanks!
brainiac Posted June 10, 2011 Author Posted June 10, 2011 *** UPDATE *** Hello all. Just would like to let everyone know that my problem is not with ImgBurn, but it's due to the Intel 6-Series Express Chipset problem. Intel Feb 7, 2011 announcement: "Intel Identifies Chipset Design Error, Implementing Solution" http://www.intel.com/consumer/products/processors/chipset.htm "... SATA ports 2–5 that may result in these SATA ports experiencing a functional issue over time. Systems with only integrated SATA ports 0 and 1 enabled are not susceptible to this issue." Q: How do I determine if my system is affected? A: Desktop systems using the Intel® H67 and P67 Express Chipsets and mobile systems using the Intel® HM67 and HM65 may be affected by this issue. Intel recommends that end users contact their place of purchase or system manufacturer for more information. Q: Which specific Intel®-branded desktop motherboards are affected? A: Intel®-branded desktop boards that are potentially affected include: DP67BG, DH67CL, DH67GD, DH67BL, DH67CF, DP67BA, DP67DE, DQ67SW, DQ67OW, DQ67EP, DB65AL. Intel-branded desktop boards based on H61 SKU of Intel® 6 Series Express Chipsets have not gone into production with B2 stepping and are not affected by this issue. This includes DH61CR, DH61BE, DH61WW, DH61DL and DH61AG. The Intel-branded desktop board layout diagrams showing the SATA connectors are available at: http://support.intel.com/support/motherboards/desktop/sb/CS-032282.htm I've contacted my place of purchase, and they will replace my motherboard this weekend. Hope this helps for those with Intel 6-Series Express Chipset.
LIGHTNING UK! Posted June 10, 2011 Posted June 10, 2011 I knew they died over time but I didn't think it would happen this soon! Either way, you're better off with a B3 stepping board, especially if it's free
brainiac Posted June 10, 2011 Author Posted June 10, 2011 I knew they died over time but I didn't think it would happen this soon! Either way, you're better off with a B3 stepping board, especially if it's free My system was bought mid-Feb this year. I guess the local shop didn't know about the recall either. The technician told me today, it might take 3 days for distributor to get it replaced. I'll try to negotiate to get my mainboard replace same day. Otherwise I might buy a new mainboard, have them installed same day, and use the replacement mainboard to upgrade an older PC. Thank you LUK!
brainiac Posted June 12, 2011 Author Posted June 12, 2011 I took my defective PC to my local shop. They don't have the Intel board with B3 for replacement, and would really need to send defective board to distributor. To have my PC back same-day, I bought an new mainboard ASUS P8 P67 Pro (New P67 B3 Revision) Photo http://www.asus.com/Motherboards/Intel_Socket_1155/P8P67_PRO/ Good thing they don't need to re-install Win 7. They only installed the new system drivers. Many thanks to LUK! and ImgBurn. Cheers!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now