GloryHound Posted December 26, 2011 Share Posted December 26, 2011 I'm trying to burn a .dvd file on a DL disc with IMGburn. I have done this before but not since this past summer. Now I start to burn and it gets stuck at 0-6%(4 tries), it doesnt say anything is wrong, it just stops. I have let it sit for up to 3 hours, to no avail. When I cancel it, it freezes up. The discs I uses have worked before with no problem, and My drive was bought over the summer. If anyone can give a clue to what is wrong or what to do, I would be most grateful. Thanks for any help in advance! here's the log: I 13:51:13 ImgBurn Version 2.5.6.0 started! I 13:51:13 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 13:51:13 Total Physical Memory: 1,301,232 KB - Available: 363,656 KB I 13:51:13 Initialising SPTI... I 13:51:13 Searching for SCSI / ATAPI devices... I 13:51:13 -> Drive 1 - Info: LITE-ON COMBO SOHC-4832K OGK1 (D:) (ATA) I 13:51:13 -> Drive 2 - Info: HP DVD Writer 1270e HH22 (G:) (USB) I 13:51:13 Found 1 DVD-ROM/CD-RW and 1 DVD±RW/RAM! I 13:52:03 Operation Started! I 13:52:03 Source File: C:\Documents and Settings\Doug Spencer\Desktop\JDownloader\JDownloader\downloads\Dance.Central.2.XBOX360-iMARS\imars-dc2.dvd I 13:52:03 Source File Sectors: 3,827,488 (MODE1/2048) I 13:52:03 Source File Size: 7,838,695,424 bytes I 13:52:03 Source File Volume Identifier: 13599 I 13:52:03 Source File Volume Set Identifier: ceee8000MS UDFBridge I 13:52:03 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 13:52:03 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 13:52:03 Source File File System(s): ISO9660, UDF (1.50) I 13:52:03 Destination Device: [0:0:0] HP DVD Writer 1270e HH22 (G:) (USB) I 13:52:03 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) I 13:52:03 Destination Media Supported Write Speeds: 4x, 6x, 8x I 13:52:03 Destination Media Sectors: 4,173,824 I 13:52:03 Write Mode: DVD I 13:52:03 Write Type: DAO I 13:52:03 Write Speed: 4x I 13:52:03 Link Size: Auto I 13:52:03 Lock Volume: Yes I 13:52:03 Test Mode: No I 13:52:03 OPC: No I 13:52:03 BURN-Proof: Enabled I 13:52:03 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) I 13:52:03 User Specified L0 Data Zone Capacity: 1,913,760 I 13:52:49 Set L0 Data Zone Capacity Succeeded! I 13:52:50 Filling Buffer... (40 MB) I 13:52:51 Writing LeadIn... I 13:52:53 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 13:52:53 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 13:52:53 Writing Layer 0... (LBA: 0 - 1913759) Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted December 26, 2011 Share Posted December 26, 2011 Freezing (where something stops processing the I/O) is usually due to drivers (including 'filter' drivers - check the 'Tools' menu) or the way the drive is connected - in your case, USB. Link to comment Share on other sites More sharing options...
GloryHound Posted December 27, 2011 Author Share Posted December 27, 2011 Freezing (where something stops processing the I/O) is usually due to drivers (including 'filter' drivers - check the 'Tools' menu) or the way the drive is connected - in your case, USB. Any suggestions of what to do? I've tried uninstalling and reinstalling, unplugging and replugging, disabling and enabling, which is everything I could possibly think of to do. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted December 27, 2011 Share Posted December 27, 2011 Well, you could post your filter driver list. Use the feature in the Tools menu. Did you not have the option of getting an internal drive? If you have the ability to add an internal normal size (non slimline) drive to your PC, you should always do that rather than buying an external. It'll be far more reliable. Link to comment Share on other sites More sharing options...
GloryHound Posted December 27, 2011 Author Share Posted December 27, 2011 =============================================== Filter Driver Load Order - ImgBurn v2.5.6.0 =============================================== Upper Device Filter: redbook Upper Class Filter: GEARAspiWDM Device: CD/DVD-ROM Device Lower Class Filter: ElbyCDFL Lower Device Filter: imapi Filter Name: redbook File Name: C:\WINDOWS\System32\DRIVERS\redbook.sys File Version: 5.1.2600.5512 (xpsp.080413-2108) File Description: Redbook Audio Filter Driver Product Name: Microsoft® Windows® Operating System Product Version: 5.1.2600.5512 Company Name: Microsoft Corporation Copyright: © Microsoft Corporation. All rights reserved. Filter Name: GEARAspiWDM File Name: C:\WINDOWS\SYSTEM32\DRIVERS\GEARAspiWDM.sys File Version: 2.02.00.01 [2.2.0.1] File Description: CD DVD Filter Product Name: CD DVD Filter Product Version: 2.02.00.01 [2.2.0.1] Company Name: GEAR Software Inc. Copyright: Copyright © GEAR Software Inc. 1997-2009 Filter Name: ElbyCDFL File Name: C:\WINDOWS\System32\Drivers\ElbyCDFL.sys File Version: 5, 2, 1, 3 [5.2.1.3] File Description: ElbyCDIO Filter Driver Product Name: CloneCD Product Version: 5, 2, 1, 3 [5.2.1.3] Company Name: SlySoft, Inc. Copyright: Copyright © 2003 - 2006 SlySoft, Inc. Filter Name: imapi File Name: C:\WINDOWS\system32\DRIVERS\imapi.sys File Version: 5.1.2600.5512 (xpsp.080413-2108) File Description: IMAPI Kernel Driver Product Name: Microsoft® Windows® Operating System Product Version: 5.1.2600.5512 Company Name: Microsoft Corporation Copyright: © Microsoft Corporation. All rights reserved. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted December 27, 2011 Share Posted December 27, 2011 Double check you've got the latest gear driver installed. http://www.gearcdr.com/support/drivers.php Install 'Driver_Installer_x86_x64.exe' and try again. When it gets stuck burning, what happens if you turn the external burner off? Does it then return a proper error? Link to comment Share on other sites More sharing options...
GloryHound Posted December 27, 2011 Author Share Posted December 27, 2011 Yeah, when i turn the drive off imgburn gives me an error message. Let me trying installing that. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted December 27, 2011 Share Posted December 27, 2011 You might also like to try burning in safe mode. Have you tried different USB ports / cables? Link to comment Share on other sites More sharing options...
GloryHound Posted December 27, 2011 Author Share Posted December 27, 2011 (edited) Its burning in safe mode right now, at around 15%. its only going at 1.7x though, which i fear could effect the game. It will be done in an hour and i will let you know if it has worked. Thanks so much for your help so far Lightning!! Edit: it failed at 60% after around an hour, does this help? Edited December 27, 2011 by GloryHound Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted December 27, 2011 Share Posted December 27, 2011 Only if you post the log You could just be getting a failure in safe mode because you're using cheapo discs. http://forum.imgburn.com/index.php?showtopic=8000 Link to comment Share on other sites More sharing options...
GloryHound Posted December 27, 2011 Author Share Posted December 27, 2011 I couldnt figure out how to copy the log while in safe mode, sorry. A better explaination is that up to 55% it was burning at 1.7x and then it went down to 0x. From that point on it fluxuated between 0x and .6x until it stopped increasing from 0x at 61%. i will try again later tonight, and if that doesnt work i will pick up some verbs. Thanks Lightning Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted December 27, 2011 Share Posted December 27, 2011 So did you or did you not get an error in safe mode? I was hoping you wouldn't run into a 'freeze' situation and instead you'd get a proper success/failure message. Link to comment Share on other sites More sharing options...
GloryHound Posted December 27, 2011 Author Share Posted December 27, 2011 It gradually slowed down and got stuck, no error message Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted December 28, 2011 Share Posted December 28, 2011 At this point I'd probably refer you back to post #4. Link to comment Share on other sites More sharing options...
GloryHound Posted December 28, 2011 Author Share Posted December 28, 2011 I'm thinking it could be a virus on my computer, but that has nothing to do with IMGburn, thanks for your help again, this is easily the best free burning software on the internet that i have tried Link to comment Share on other sites More sharing options...
Recommended Posts