drtom Posted June 11, 2012 Posted June 11, 2012 Hi4all! At 2011 the same error was here but no answer. Sometimes after burning (DVD, BD etc. whatever) my ImgBurn is stoped before cycling tray: - and that is all!!! After that disc-drive is blocked, and imgBurn is in meditation absolutely. Log is: And every time when I want close programm I can see humiliating: Only reboot can get it. Windows 7 x64. ImgBurn is fine for me.... but sometimes.... see above!
LIGHTNING UK! Posted June 11, 2012 Posted June 11, 2012 Does the drive tray actually eject when it tries to 'cycle' it? If it does, does it then also reinsert it? This sounds more like an issue with your system than a bug in ImgBurn - as it's working fine for everyone else.
drtom Posted June 12, 2012 Author Posted June 12, 2012 No, the disc tray does not eject. The tray does not open by button, and access it from the operating system no longer exists. This is not always the case but sometimes it happens.
LIGHTNING UK! Posted June 12, 2012 Posted June 12, 2012 Ok well as I said in my previous message, this sounds like a system issue. If you're bored one day and have discs to burn, try enabling I/O debug mode before you start the 'Write' operation going - to do that, press the F8 key - you should see a log entry saying it has been enabled. The additional logging will show us which command your system is getting stuck on.
Recommended Posts