suofoglu Posted October 3, 2012 Share Posted October 3, 2012 I have two xbox 360 consecutive games (fifa13 and sleeping dogs) that the 1st recording gives me 52-54% error when installing on hdd (in layerbreak) immediately do the 2nd recording, without changing anything in imgburn and ihas 224b, and 100% well installed. just use the XGD3 IHAS to record, you might spend a month without using the drive and that makes the first record not good? what can I do to record either the 1st? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 3, 2012 Share Posted October 3, 2012 Post a log please of you burning + verifying one of the problem discs. If it does both of those bits ok, the rest it beyond the scope of ImgBurn and this forum. Link to comment Share on other sites More sharing options...
suofoglu Posted October 3, 2012 Author Share Posted October 3, 2012 (edited) the imgburn says that the operation was successfully complet, the problem appears at the moment to install on xbox360's hdd with the first burning, but if i burned inmediatly the second burning is ok, install all the disc, for this i'm confused!! Edited October 3, 2012 by suofoglu Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 3, 2012 Share Posted October 3, 2012 I still need to see the log. iHAS drives and overburning isn't an exact science. Link to comment Share on other sites More sharing options...
Adrianvdh Posted October 3, 2012 Share Posted October 3, 2012 (edited) Did you verfiy the Game with ABGX360 v1.0.6 Edited October 3, 2012 by Adrianvdh Link to comment Share on other sites More sharing options...
suofoglu Posted October 3, 2012 Author Share Posted October 3, 2012 (edited) yes i verify all the iso's, but i confused because with the same options and iso the second burning is good,without problems. the imgburn, in both cases, burning without problems, i think that i only use the ihas for burning xgd3 and the drive can be one month or more without works Edited October 3, 2012 by suofoglu Link to comment Share on other sites More sharing options...
suofoglu Posted October 3, 2012 Author Share Posted October 3, 2012 (edited) I still need to see the log. iHAS drives and overburning isn't an exact science. i dont have more dvd's dl, but i can tell you that the imgburn burning log is ok, likes ever Edited October 3, 2012 by suofoglu Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 3, 2012 Share Posted October 3, 2012 Old logs can be found via the 'Help' menu. Link to comment Share on other sites More sharing options...
suofoglu Posted October 3, 2012 Author Share Posted October 3, 2012 Old logs can be found via the 'Help' menu. ; I 11:03:35 ImgBurn Version 2.5.7.0 started! I 11:03:35 Microsoft Windows Vista Home Premium x64 Edition (6.0, Build 6002 : Service Pack 2) I 11:03:35 Total Physical Memory: 4.192.656 KB - Available: 2.981.016 KB I 11:03:35 Initialising SPTI... I 11:03:35 Searching for SCSI / ATAPI devices... I 11:03:35 -> Drive 1 - Info: DTSOFT BDROM 1.05 (E:) (Virtual) I 11:03:36 -> Drive 2 - Info: ATAPI iHAS224 B GL0A (D:) (ATAPI) I 11:03:36 Found 1 DVD±RW/RAM and 1 BD-ROM! I 11:04:16 Operation Started! I 11:04:16 Source File: C:\Users\kike\Desktop\descargas\fifa2013.espa_ol100%.pollo_0123\fifa2013.español100%.pollo_0123\fifa2013.español100%.pollo_0123.dvd I 11:04:16 Source File Sectors: 4.267.015 (MODE1/2048) I 11:04:16 Source File Size: 8.738.846.720 bytes I 11:04:16 Source File Volume Identifier: DVD_ROM I 11:04:16 Source File Volume Set Identifier: 3a03c000MS UDFBridge I 11:04:16 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 11:04:16 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 11:04:16 Source File File System(s): ISO9660; UDF (1.50) I 11:04:16 Destination Device: [0:1:0] ATAPI iHAS224 B GL0A (D:) (ATAPI) I 11:04:16 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 11:04:16 Destination Media Supported Write Speeds: 2,4x; 4x; 6x; 8x I 11:04:16 Destination Media Sectors: 4.267.040 I 11:04:16 Write Mode: DVD I 11:04:16 Write Type: DAO I 11:04:16 Write Speed: 2,4x I 11:04:16 DVD+R DL Reserve Track: No I 11:04:16 Link Size: Auto I 11:04:16 Lock Volume: Yes I 11:04:16 Test Mode: No I 11:04:16 OPC: No I 11:04:16 BURN-Proof: Enabled I 11:04:16 Write Speed Successfully Set! - Effective: 3.324 KB/s (2,4x) I 11:04:16 Book Type Setting: DVD-ROM I 11:04:16 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes I 11:04:16 Optimal L0 Data Zone Capacity: 2.133.520 I 11:04:16 Optimal L0 Data Zone Method: Copied From Original Disc I 11:04:16 Set L0 Data Zone Capacity Succeeded! I 11:04:16 Filling Buffer... (80 MB) I 11:04:18 Writing LeadIn... I 11:04:53 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 11:04:53 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 11:04:53 Writing Layer 0... (LBA: 0 - 2133519) I 11:26:49 Writing Layer 1... (LBA: 2133520 - 4267014) I 11:48:54 Synchronising Cache... I 11:49:22 Closing Track... I 11:49:23 Finalising Disc... I 11:50:15 Exporting Graph Data... I 11:50:15 Graph Data File: C:\Users\kike\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS224_B_GL0A_SÁBADO-29-DE-SEPTIEMBRE-DE-2012_11-04_MKM-003-00_2,4x.ibg I 11:50:15 Export Successfully Completed! I 11:50:15 Operation Successfully Completed! - Duration: 00:45:59 I 11:50:15 Average Write Rate: 3.232 KB/s (2.3x) - Maximum Write Rate: 3.396 KB/s (2.5x) I 11:50:25 Close Request Acknowledged I 11:50:25 Closing Down... I 11:50:25 Shutting down SPTI... I 11:50:25 ImgBurn closed! Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 3, 2012 Share Posted October 3, 2012 Ok well in my tests, I had much better and more consistent burns once I'd enabled 'Force HyperTuning' in the Drive's Advanced Settings (or the eeprom tool). You should be fine to burn at 4x too. That log contains no verify info so I can't tell if the disc was even readable in the drive that just burnt it. Link to comment Share on other sites More sharing options...
suofoglu Posted October 3, 2012 Author Share Posted October 3, 2012 (edited) Ok well in my tests, I had much better and more consistent burns once I'd enabled 'Force HyperTuning' in the Drive's Advanced Settings (or the eeprom tool). You should be fine to burn at 4x too. That log contains no verify info so I can't tell if the disc was even readable in the drive that just burnt it. ok, thanks i change the options in the eeprom utility, but what explains that the 1st burning do this errors in the area oh the layerbreak ( to install in xbox's hdd) and the 2nd burning with the same options no has errors and install 100%??? Edited October 3, 2012 by suofoglu Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 3, 2012 Share Posted October 3, 2012 That'll be where the word 'consistent' (used in my previous post) comes in. See here... it took me 12 attempts to get decent results. http://forum.imgburn.com/index.php?showtopic=18871&st=0&p=136519&&do=findComment&comment=136519 Link to comment Share on other sites More sharing options...
suofoglu Posted October 5, 2012 Author Share Posted October 5, 2012 thank you for your time, support and help!!!! Link to comment Share on other sites More sharing options...
dbminter Posted October 6, 2012 Share Posted October 6, 2012 once I'd enabled 'Force HyperTuning' Ah! That must be what the ForceHT line in the logs is. Force HyperTuning. I come across it and have never known what it was. Link to comment Share on other sites More sharing options...
Recommended Posts