decanfrost Posted March 5, 2013 Posted March 5, 2013 (edited) Here is the info from ImgBurn (I have 5 of these discs all giving me the same problem, other brands are working fine) PIONEER BD-RW BDR-206D 1.56 (SATA) Current Profile: BD-RE Disc Information: Status: Empty State of Last Session: Empty Erasable: Yes MID: CMCMAG-CN2-000 Supported Write Speeds: 2x BD Disc Information: Disc ID: CMCMAG-CN2-000 Disc Type: BD-RE Disc Size: 120mm Disc Class: 0 Disc Version: 2 Number of Layers: 1 Layer Type: Rewritable DVD Layer Present: No CD Layer Present: No Channel Bit Length: 74.50nm (25GB Per Layer) BCA Present: Yes Maximum Transfer Rate: Not Specified First PAA of Data Zone: 131,072 Last PAA of Data Zone: 1,658,494 Format Capacities: DT: 0x01 - NB: 12219392 (0x00BA7400) - TDP: 20480 FT: 0x00 - NB: 11826176 (0x00B47400) - TDP: 12288 FT: 0x30 - NB: 11826176 (0x00B47400) - TDP: 12288 FT: 0x30 - NB: 11564032 (0x00B07400) - TDP: 20480 FT: 0x30 - NB: 12088320 (0x00B87400) - TDP: 4096 FT: 0x31 - NB: 12219392 (0x00BA7400) - TDP: 2048 Performance (Write Speed): Descriptor 1... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 12219391 (0x00BA73FF) -> RS: 8,990 KB/s (2x) - WS: 8,990 KB/s (2x) ImgBurn Log ----------------------------------------------------------------------- I 13:03:32 Media Supported Write Speeds: 2x I 13:03:32 Quick Erase: No I 13:03:32 Format Properly: Yes I 13:03:32 Format Size: Preferred I 13:03:32 Format With Full Certification: Yes I 13:03:32 Format Without Spare Areas: Yes I 13:03:33 Erasing Disc... W 13:03:33 FormatDisc(FT: 0x31, FST: 0x02) Not Supported! W 13:03:33 FormatDisc(FT: 0x31, FST: 0x03) Not Supported! W 13:04:25 Potential 'WaitImmediateIO' Deferred Error - (99%, 0/4) - Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0xE0) E 13:04:27 Failed to Erase Disc! - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0xE0) E 13:04:27 Operation Failed! - Duration: 00:00:54 Why can I not erase these discs and use them ??? please help Thank you Edited March 5, 2013 by decanfrost
dbminter Posted March 5, 2013 Posted March 5, 2013 (edited) I would have lay the blame on the manufacturer of the media. CMCMAG is CMC Magentics. 50% of the time, their stuff won't finish writes, so, it doesn't surprise me that their stuff won't finish erasing/formatting either. It could also be that your drive doesn't like CMC BD-RE so it may be down to the drive, but, either way, I'd blame CMC for it. Did you buy these in a store or online? If you bought them in a store, what company label is on the packaging so I'll know to steer clear of them. I've only ever used 3 BD-RE's. 1 Sony which died after 5 writes, typical Sony quality. Several Memorex BD-RE which are made by Ritek. 1 Verbatim which is made by Verbatim/Mitsubishi. Oh, looks like LUK replied at the same time I was replying. Edited March 5, 2013 by dbminter
decanfrost Posted March 5, 2013 Author Posted March 5, 2013 I got them online, no labels on the disc. they are printables
Recommended Posts