dbminter Posted February 13, 2014 Posted February 13, 2014 I was writing an image to a DVD+RW. It was new and hadn't been formatted yet, so the write first started by formatting the disc. While it was doing that, I turned on my LiteOn Lightscribe USB drive to write a label on a Lightscribe surface DVD-R. After the formatted completed, the write never started after the format due to some kind of Device not ready error. There was no entry in the log and I didn't write down the window of error dialog text, so I'm not sure what it was. I'm guessing this is most likely caused by the detection of new devices, right? I just started the write again and the SATA drive then wrote correctly to the disc.
LIGHTNING UK! Posted February 14, 2014 Posted February 14, 2014 Can you copy + paste the bit from the auto-saved log for that session please? The device list is only rescanned when the program isn't busy with things (otherwise it's queued up). There's code to ignore it at the end of an erase/format if it was being done automatically before a write operation.
dbminter Posted February 14, 2014 Author Posted February 14, 2014 There's nothing in the log, I think, that will help, but here it is: //****************************************\\; ImgBurn Version 2.5.8.0 - Log; Thursday, 13 February 2014, 15:33:14; \\****************************************//;;I 10:59:14 Project Successfully Loaded!I 10:59:14 ImgBurn Version 2.5.8.0 started!I 10:59:14 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1)I 10:59:14 Total Physical Memory: 8,370,632 KiB - Available: 5,001,360 KiBI 10:59:14 Initialising SPTI...I 10:59:14 Searching for SCSI / ATAPI devices...I 10:59:14 -> Drive 1 - Info: ELBY CLONEDRIVE 1.4 (L:) (SCSI)I 10:59:14 -> Drive 2 - Info: ELBY CLONEDRIVE 1.4 (N:) (SCSI)I 10:59:14 -> Drive 3 - Info: ELBY CLONEDRIVE 1.4 (Q:) (SCSI)I 10:59:14 -> Drive 4 - Info: HL-DT-ST BD-RE WH14NS40 1.01-A1 (S:) (SATA)I 10:59:14 -> Drive 5 - Info: PLDS DVD+-RW DH-16ABS PD11 (K:) (SATA)I 10:59:14 Found 1 DVD±RW/RAM, 3 BD-ROM/HD DVD-ROMs and 1 BD-RE XL!I 11:22:22 Project Successfully Saved!I 11:25:43 Operation Started!I 11:25:43 Device: [0:0:0] HL-DT-ST BD-RE WH14NS40 1.01 (S:) (SATA)I 11:25:43 Media Type: DVD+RW (Disc ID: RICOHJPN-W21-01)I 11:25:43 Media Supported Write Speeds: 6x, 8xI 11:25:43 Quick Erase: NoI 11:25:43 Format Properly: YesI 11:25:43 Format Size: PreferredI 11:25:43 Erasing Disc...W 11:26:32 Device Arrival Detected!W 11:26:32 The device list will be refreshed at the next available opportunity.I 11:34:06 Operation Successfully Completed! - Duration: 00:08:23I 11:34:11 Searching for SCSI / ATAPI devices...I 11:34:11 -> Drive 1 - Info: ELBY CLONEDRIVE 1.4 (L:) (SCSI)I 11:34:11 -> Drive 2 - Info: ELBY CLONEDRIVE 1.4 (N:) (SCSI)I 11:34:11 -> Drive 3 - Info: ELBY CLONEDRIVE 1.4 (Q:) (SCSI)I 11:34:12 -> Drive 4 - Info: HL-DT-ST BD-RE WH14NS40 1.01-A1 (S:) (SATA)I 11:34:12 -> Drive 5 - Info: PLDS DVD+-RW DH-16ABS PD11 (K:) (SATA)I 11:34:12 -> Drive 6 - Info: ATAPI eHAU424 A 7L1P (T:) (USB 2.0)I 11:34:12 Found 2 DVD±RW/RAMs, 3 BD-ROM/HD DVD-ROMs and 1 BD-RE XL!I 12:17:23 Operation Started!I 12:17:23 Source File Sectors: 623,648 (MODE1/2048)I 12:17:23 Source File Size: 1,277,231,104 bytesI 12:17:23 Source File Volume Set Identifier: 444D5ADD00098406I 12:17:23 Source File Application Identifier: IMGBURN V2.5.8.0 - THE ULTIMATE IMAGE BURNER!I 12:17:23 Source File Implementation Identifier: ImgBurnI 12:17:23 Source File File System(s): ISO9660, UDF (1.02)I 12:17:23 Destination Device: [0:0:0] HL-DT-ST BD-RE WH14NS40 1.01 (S:) (SATA)I 12:17:23 Destination Media Type: DVD+RW (Disc ID: RICOHJPN-W21-01)I 12:17:23 Destination Media Supported Write Speeds: 6x, 8xI 12:17:23 Destination Media Sectors: 2,295,104I 12:17:23 Write Mode: DVDI 12:17:23 Write Type: DAOI 12:17:23 Write Speed: MAXI 12:17:23 Link Size: AutoI 12:17:23 Lock Volume: YesI 12:17:23 Test Mode: NoI 12:17:23 OPC: NoI 12:17:23 BURN-Proof: EnabledW 12:17:23 Write Speed Miscompare! - MODE SENSE: 11,080 KB/s (8x), GET PERFORMANCE: 8,310 KB/s (6x)I 12:17:23 Write Speed Successfully Set! - Effective: 8,310 KB/s (6x)I 12:17:23 Book Type Setting: N/AI 12:17:24 Filling Buffer... (40 MiB)I 12:17:25 Writing LeadIn...I 12:17:29 Writing Session 1 of 1... (1 Track, LBA: 0 - 623647)I 12:17:29 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 623647)I 12:20:04 Synchronising Cache...I 12:20:05 Closing Session...I 12:20:06 Exporting Graph Data...I 12:20:06 Export Successfully Completed!I 12:20:06 Operation Successfully Completed! - Duration: 00:02:42I 12:20:06 Average Write Rate: 8,099 KiB/s (6.0x) - Maximum Write Rate: 10,929 KiB/s (8.1x)I 12:20:06 Cycling Tray before Verify...W 12:20:14 Waiting for device to become ready...I 12:20:26 Device Ready!I 12:20:29 Operation Started!I 12:20:29 Source Device: [0:0:0] HL-DT-ST BD-RE WH14NS40 1.01 (S:) (SATA)I 12:20:29 Source Media Type: DVD+RW (Book Type: DVD+RW) (Disc ID: RICOHJPN-W21-01)I 12:20:29 Source Media Supported Read Speeds: 2x, 4x, 6.3x, 8.3x, 10.3x, 12.1xI 12:20:29 Source Media Supported Write Speeds: 6x, 8xI 12:20:29 Source Media Sectors: 2,295,104 (Track Path: PTP)I 12:20:29 Source Media Size: 4,700,372,992 bytesI 12:20:29 Image File Sectors: 623,648 (MODE1/2048)I 12:20:29 Image File Size: 1,277,231,104 bytesI 12:20:29 Image File Volume Set Identifier: 444D5ADD00098406I 12:20:29 Image File Application Identifier: IMGBURN V2.5.8.0 - THE ULTIMATE IMAGE BURNER!I 12:20:29 Image File Implementation Identifier: ImgBurnI 12:20:29 Image File File System(s): ISO9660, UDF (1.02)I 12:20:29 Read Speed (Data/Audio): MAX / MAXI 12:20:30 Read Speed - Effective: 5x - 12.1xI 12:20:30 Verifying Session 1 of 1... (1 Track, LBA: 0 - 623647)I 12:20:30 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 623647)I 12:23:04 Exporting Graph Data...I 12:23:04 Export Successfully Completed!I 12:23:04 Operation Successfully Completed! - Duration: 00:02:29I 12:23:04 Average Verify Rate: 8,485 KiB/s (6.3x) - Maximum Verify Rate: 10,366 KiB/s (7.7x) As I said, there was no error written to the log. The error was in a dialog window only.
dbminter Posted February 18, 2014 Author Posted February 18, 2014 I did some testing to see if I could replicate the issue and get you the dialog message. It's something I can repeat. Here's what I did. First, I started a write on a DVD+RW that needed a format/full erase before the write. Once the format first reached 99%, then, I turned on my USB LiteOn burner from its powered off state. I waited for ImgBurn to say it would refresh the device list at the next available opportunity. I waited for about a minute and turned off the USB LiteOn. Once the format finished, it detected the device list again but never started the actual write. No error is written to the log, just a dialog window that opens with the following message: "Device not ready (The handle is invalid.)" Here's the log, but, it won't help, I'm afraid. I 18:57:48 Operation Started!I 18:57:48 Device: [0:0:0] HL-DT-ST BD-RE WH14NS40 1.01 (S:) (SATA)I 18:57:48 Media Type: DVD+RW (Disc ID: RICOHJPN-W21-01)I 18:57:48 Media Supported Write Speeds: 6x, 8xI 18:57:48 Quick Erase: NoI 18:57:49 Format Properly: YesI 18:57:49 Format Size: PreferredI 18:57:49 Erasing Disc...W 18:58:23 Device Arrival Detected!W 18:58:23 The device list will be refreshed at the next available opportunity.I 19:06:12 Operation Successfully Completed! - Duration: 00:08:23I 19:06:16 Searching for SCSI / ATAPI devices...I 19:06:16 -> Drive 1 - Info: ELBY CLONEDRIVE 1.4 (L:) (SCSI)I 19:06:16 -> Drive 2 - Info: ELBY CLONEDRIVE 1.4 (N:) (SCSI)I 19:06:16 -> Drive 3 - Info: ELBY CLONEDRIVE 1.4 (Q:) (SCSI)I 19:06:18 -> Drive 4 - Info: HL-DT-ST BD-RE WH14NS40 1.01-A1 (S:) (SATA)I 19:06:18 -> Drive 5 - Info: PLDS DVD+-RW DH-16ABS PD11 (K:) (SATA)I 19:06:18 Found 1 DVD±RW/RAM, 3 BD-ROM/HD DVD-ROMs and 1 BD-RE XL!
dbminter Posted February 18, 2014 Author Posted February 18, 2014 One thing I noticed that I don't know if it's part of the issue but I saw that when the device was turned off, ImgBurn didn't display a notice saying a device removal had been detected. I'm guessing it was because the software only queues up one device removal/detection at a time?
Recommended Posts