iggy Posted December 25, 2014 Posted December 25, 2014 (edited) i have used imgburn for a lonnng time without any problems until now--- rip bluray image to hard drive using '' slyfox'' then burn onto bd discs using imgburn using a pioneer blueray reader / writer (reason for ripping is i have purchased bluray films from the USA and they wont play in my player as i am in a different zone, and need to copy to enable me to watch these films) I have had zero problems in the past however just today cant get imgburn to work with a message coming up as follows.... Xerror Device(D;D;D)pioneer BD.RW BDR-205-1.03 (E;)(USB) SciStatus;0x02 Interpretation;check condition CDB;AAA 00 00 00 03 40 00 00 00 40 00 Interpretation;write(12)-sectors;832-863 Sense Area 70 00 03 00 00 00 00 73 03 00 00 00 00 SK Interpretation;Medium Error ASC/ASC Q Interpretation; Power Calibration Area error I am guessing that it is telling me my reader/writer has had the gong! however i can use it to rip discs to hard drive and it will allow me to use imgburn to rip ordinary DVDs to disc's but now it wont let me burn blue rays to blue ray discs. Any clues? do I need to alter the settings? and go easy on me as i'm not real tech savy Edited December 25, 2014 by iggy
LIGHTNING UK! Posted December 27, 2014 Posted December 27, 2014 Your drive is having trouble burning to the discs you're trying to use. Please post the full log from that attempt at burning.
iggy Posted December 28, 2014 Author Posted December 28, 2014 How or where do I find the full log? And remember I did say I'm not tech literate. Since posting my original query I gradually increased the burn rate and wasted a few more d/l discs(using tdk dl discs) until it finally worked with it burning the b/d data to disc,however when viewing the burnt disc (movie) the picture was good and it showed the audio as coming through in dts but halfway through the film the audio stopped, so that has resulted in another stuffed disc. This exercise is proving rather costly.
LIGHTNING UK! Posted December 29, 2014 Posted December 29, 2014 If you go into the 'ImgBurn Support' forum and read the pink box at the top of the page, you should see a link to a guide talking about log files. Failing that, check the Guides forum.
Recommended Posts