e-ghost Posted September 30, 2017 Posted September 30, 2017 (edited) Set L0 Data Zone Capacity Failed! - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0x4C) Pioneer BDR-205 can burn DL BD but not DVD+R I found this very strange. This BD-RW supposes to support both DL BD and DVD+. I used it to backup a lot BD already. Recently need to burn some files to friends so try burning DL DVD+R for the first time but failed. The media is ok as it works with my another DVD-RW. Log as follow: I 02:54:11 ImgBurn Version 2.5.7.0 started!I 02:54:11 Microsoft Windows 8 Professional x64 Edition (6.2, Build 9200)I 02:54:11 Total Physical Memory: 16,736,796 KB - Available: 5,117,108 KBI 02:54:11 Initialising SPTI...I 02:54:11 Searching for SCSI / ATAPI devices...I 02:54:11 -> Drive 1 - Info: PIONEER BD-RW BDR-205 1.12 (M:) (SATA)I 02:54:11 Found 1 BD-RE!I 02:54:30 Operation Started!I 02:54:30 Building Image Tree...I 02:54:30 Checking Directory Depth...I 02:54:30 Calculating Totals...I 02:54:30 Preparing Image...I 02:54:31 Checking Path Length...I 02:54:31 Contents: 6 Files, 0 FoldersI 02:54:31 Content Type: DataI 02:54:31 Data Type: MODE1/2048I 02:54:31 File System(s): ISO9660, Joliet, UDF (1.02)I 02:54:31 Volume Label: YOU_WHO_CAME_FROM_THE_STARSI 02:54:31 Size: 6,243,701,592 bytesI 02:54:31 Sectors: 3,048,686I 02:54:31 Image Size: 6,244,270,080 bytesI 02:54:31 Image Sectors: 3,048,960I 02:54:31 Operation Successfully Completed! - Duration: 00:00:00I 02:54:40 Operation Started!I 02:54:40 Building Image Tree...I 02:54:40 Checking Directory Depth...I 02:54:40 Calculating Totals...I 02:54:40 Preparing Image...I 02:54:40 Checking Path Length...I 02:54:40 Contents: 6 Files, 0 FoldersI 02:54:40 Content Type: DataI 02:54:40 Data Type: MODE1/2048I 02:54:40 File System(s): ISO9660, Joliet, UDF (1.02)I 02:54:40 Volume Label: YOU_WHO_CAME_FROM_THE_STARSI 02:54:40 Size: 6,243,701,592 bytesI 02:54:40 Sectors: 3,048,686I 02:54:40 Image Size: 6,244,270,080 bytesI 02:54:40 Image Sectors: 3,048,960I 02:54:42 Operation Successfully Completed! - Duration: 00:00:01I 02:54:42 Operation Started!I 02:54:42 Source File: -==/\/[bUILD IMAGE]\/\==-I 02:54:42 Source File Sectors: 3,048,960 (MODE1/2048)I 02:54:42 Source File Size: 6,244,270,080 bytesI 02:54:42 Source File Volume Identifier: YOU_WHO_CAME_FROM_THE_STARSI 02:54:42 Source File Volume Set Identifier: 4B3E16D4002E85FFI 02:54:42 Source File Application Identifier: ImgBurn v2.5.7.0 - The Ultimate Image Burner!I 02:54:42 Source File Implementation Identifier: ImgBurnI 02:54:42 Source File File System(s): ISO9660, Joliet, UDF (1.02)I 02:54:42 Destination Device: [2:1:0] PIONEER BD-RW BDR-205 1.12 (M:) (SATA)I 02:54:42 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67)I 02:54:42 Destination Media Supported Write Speeds: 2.4x, 4x, 6x, 8xI 02:54:42 Destination Media Sectors: 4,173,824I 02:54:42 Write Mode: DVDI 02:54:42 Write Type: DAOI 02:54:42 Write Speed: 4xI 02:54:42 DVD+R DL Reserve Track: NoI 02:54:42 Link Size: AutoI 02:54:42 Lock Volume: YesI 02:54:42 Test Mode: NoI 02:54:42 OPC: NoI 02:54:42 BURN-Proof: EnabledI 02:54:42 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)I 02:54:42 Advanced Settings - Optimal Writing Speed: NoI 02:54:42 Optimal L0 Data Zone Capacity: 1,524,480I 02:54:42 Optimal L0 Data Zone Method: ECC Block BoundaryW 02:55:12 Set L0 Data Zone Capacity Failed! - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0x4C) ---------------------------ImgBurn---------------------------Device: [2:1:0] PIONEER BD-RW BDR-205 1.12 (M:) (SATA)Family Tree:-> ACPI x64-based PC-> Microsoft ACPI-Compliant System-> PCI Express Root Complex-> Intel® 7 Series/C216 Chipset Family PCI Express Root Port 8 - 1E1E (VEN_8086&DEV_1E1E - Intel - pci)-> Marvell 91xx SATA 6G Controller (VEN_1B4B&DEV_9172 - Marvell - mvs91xx)-> CD-ROM Drive (PIONEER BD-RW BDR-205 SCSI CdRom Device) (Bus Number 0, Target Id 1, LUN 0)---------------------------OK --------------------------- I got this error in latest v2.5.8.0 first and one youtube suggested that it can be fixed by downgraded to 2.5.7.0. After the error, the DVD+R was not burnt yet. Anyone can help? Thanks a lot! Edited September 30, 2017 by e-ghost
LIGHTNING UK! Posted September 30, 2017 Posted September 30, 2017 Ignore what YouTube says, some people don't know as much as they think they do. Your drive appears to be having an issue with the discs. Sure, they might not be outright faulty (as another of your drives can burn them), but for whatever reason, your pioneer doesn't like them. You should try some Verbatim MKM-003-00 discs. If they also fail, it's looking more like a hardware issue. You could try cleaning the drive with a cleaning disc or look at replacing it if you really need to burn DVD+r dl with whichever drive you have. I can see from your drive's family tree info that it's connected to a port on a Marvell controller. Sometimes that can cause problems. You should try and connect it to a port on the intel sata controller instead.
dbminter Posted September 30, 2017 Posted September 30, 2017 I'd echo LUK's statement about trying Verbatim DataLife Plus MKM DVD+R DL. Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) Ricoh DVD+R DL is, well, just not very good. I tried 5 of them a few years ago. They all completed burns and Verifies, but 3 of them were unreadable a year later. Verbatim DataLife Plus MKM DVD+R DL is really the only quality DVD+R DL out there. It's not guaranteed to solve your problem, but it's where I'd look into first.
e-ghost Posted November 6, 2017 Author Posted November 6, 2017 Ignore what YouTube says, some people don't know as much as they think they do. Your drive appears to be having an issue with the discs. Sure, they might not be outright faulty (as another of your drives can burn them), but for whatever reason, your pioneer doesn't like them. You should try some Verbatim MKM-003-00 discs. If they also fail, it's looking more like a hardware issue. You could try cleaning the drive with a cleaning disc or look at replacing it if you really need to burn DVD+r dl with whichever drive you have. I can see from your drive's family tree info that it's connected to a port on a Marvell controller. Sometimes that can cause problems. You should try and connect it to a port on the intel sata controller instead. Thanks a lot for your advise. Just tried to change it to intel sata controller. I 00:41:16 ImgBurn Version 2.5.8.0 started! I 00:41:16 Microsoft Windows 8 Professional x64 Edition (6.2, Build 9200) I 00:41:16 Total Physical Memory: 16,736,796 KiB - Available: 13,352,820 KiB I 00:41:16 Initialising SPTI... I 00:41:16 Searching for SCSI / ATAPI devices... I 00:41:16 -> Drive 1 - Info: PIONEER BD-RW BDR-205 1.12-ID43 (L:) (SATA) I 00:41:16 Found 1 BD-RE! I 00:47:32 Device: [0:0:0] PIONEER BD-RW BDR-205 1.12 (L:) (SATA) I 00:47:32 Family Tree: I 00:47:32 -> ACPI x64-based PC I 00:47:32 -> Microsoft ACPI-Compliant System I 00:47:32 -> PCI Express Root Complex I 00:47:32 -> Standard SATA AHCI Controller (VEN_8086&DEV_1E02 - Intel - storahci - v10.0.15063.332) I 00:47:32 -> CD-ROM Drive (PIONEER BD-RW BDR-205) (Bus Number 4, Target Id 0, LUN 0) I 00:48:53 Operation Started! I 00:48:53 Building Image Tree... I 00:48:53 Checking Directory Depth... I 00:48:53 Calculating Totals... I 00:48:53 Preparing Image... W 00:48:53 ISO9660 File System: 279 folder/file names have been modified due to your current settings. I 00:48:53 Checking Path Length... I 00:48:53 Contents: 741 Files, 10 Folders I 00:48:53 Content Type: Data I 00:48:53 Data Type: MODE1/2048 I 00:48:53 File System(s): ISO9660 I 00:48:53 Volume Label: [Not Configured] I 00:48:53 Size: 4,538,737,132 bytes I 00:48:53 Sectors: 2,216,559 I 00:48:54 Image Size: 4,539,613,184 bytes I 00:48:54 Image Sectors: 2,216,608 I 00:48:54 Operation Successfully Completed! - Duration: 00:00:00 I 00:49:03 Operation Started! I 00:49:03 Building Image Tree... W 00:49:04 Skipped Hidden File: G:\相片\00_final\相片_沛沛\100718-0813_明明+龍+沛沛_北京\影片\Thumbs.db I 00:49:04 Checking Directory Depth... I 00:49:04 Calculating Totals... I 00:49:04 Preparing Image... W 00:49:04 ISO9660 File System: 293 folder/file names have been modified due to your current settings. I 00:49:04 Checking Path Length... I 00:49:04 Contents: 780 Files, 12 Folders I 00:49:04 Content Type: Data I 00:49:04 Data Type: MODE1/2048 I 00:49:04 File System(s): ISO9660 I 00:49:04 Volume Label: [Not Configured] I 00:49:04 Size: 8,491,599,794 bytes I 00:49:04 Sectors: 4,146,686 I 00:49:04 Image Size: 8,492,515,328 bytes I 00:49:04 Image Sectors: 4,146,736 I 00:49:04 Operation Successfully Completed! - Duration: 00:00:00 I 00:49:15 Operation Started! I 00:49:15 Building Image Tree... W 00:49:15 Skipped Hidden File: G:\相片\00_final\相片_沛沛\100718-0813_明明+龍+沛沛_北京\影片\Thumbs.db I 00:49:33 Checking Directory Depth... I 00:49:33 Calculating Totals... I 00:49:33 Preparing Image... W 00:49:33 ISO9660 File System: 293 folder/file names have been modified due to your current settings. I 00:49:34 Checking Path Length... I 00:49:34 Contents: 780 Files, 12 Folders I 00:49:34 Content Type: Data I 00:49:34 Data Type: MODE1/2048 I 00:49:34 File System(s): ISO9660 I 00:49:34 Volume Label: PUI_PUI_PICTURE I 00:49:34 Size: 8,491,599,794 bytes I 00:49:34 Sectors: 4,146,686 I 00:49:34 Image Size: 8,492,515,328 bytes I 00:49:34 Image Sectors: 4,146,736 I 00:49:36 Operation Successfully Completed! - Duration: 00:00:20 I 00:49:36 Operation Started! I 00:49:36 Source File: -==/\/[bUILD IMAGE]\/\==- I 00:49:36 Source File Sectors: 4,146,736 (MODE1/2048) I 00:49:36 Source File Size: 8,492,515,328 bytes I 00:49:36 Source File Volume Identifier: PUI_PUI_PICTURE I 00:49:36 Source File Volume Set Identifier: UNDEFINED I 00:49:36 Source File Application Identifier: IMGBURN V2.5.8.0 - THE ULTIMATE IMAGE BURNER! I 00:49:36 Source File Implementation Identifier: ImgBurn v2.5.8.0 I 00:49:36 Source File File System(s): ISO9660 I 00:49:36 Destination Device: [0:0:0] PIONEER BD-RW BDR-205 1.12 (L:) (SATA) I 00:49:36 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) I 00:49:36 Destination Media Supported Write Speeds: 2.4x, 4x, 6x, 8x I 00:49:36 Destination Media Sectors: 4,173,824 I 00:49:36 Destination Media L0 Data Zone Capacity: 2,086,912 (Changeable: Yes) I 00:49:36 Write Mode: DVD I 00:49:36 Write Type: DAO I 00:49:36 Write Speed: 6x I 00:49:36 DVD+R DL Reserve Track: No I 00:49:36 Link Size: Auto I 00:49:36 Lock Volume: Yes I 00:49:36 Test Mode: No I 00:49:36 OPC: No I 00:49:36 BURN-Proof: Enabled I 00:49:36 Write Speed Successfully Set! - Effective: 8,310 KB/s (6x) I 00:49:36 Advanced Settings - Optimal Writing Speed: No I 00:49:36 Optimal L0 Data Zone Capacity: 2,073,376 I 00:49:36 Optimal L0 Data Zone Method: ECC Block Boundary W 00:50:49 Set L0 Data Zone Capacity Failed! - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0x4C) W 00:50:59 Waiting for device to become ready... I 00:52:16 Abort Request Acknowledged W 00:52:16 Retrying (1)... E 00:52:16 Set L0 Data Zone Capacity Failed! - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0x4C) E 00:52:16 Operation Failed! - Duration: 00:02:40 I 00:52:16 Average Write Rate: N/A - Maximum Write Rate: N/A After changed to intel sata controller, I saw that the "Optimal L0 Data Zone Capacity: 2,073,376" chanaged. But the result is the same. So is it the media's quality issue? Thanks a lot!
dbminter Posted November 6, 2017 Posted November 6, 2017 As I said, I'd avoid using those Ricoh DL media all together. The only consistent quality DVD+R DL are Verbatim's MKM media. Low quality media like Ricoh and CMC cause nearly half of the problems seen on this board. It's not a miracle that changing to quality media resolves a good portion of people's problems. It's not a guaranteed solution, of course, but it's what I generally look at in logs of failures. When you get the Verbatim MKM's, look for the DataLife Plus series. NOT the Life series. DataLife Plus is MKM. Life series is cheap ass CMC media. DataLife Plus you will generally only find in online stores, like where I get mine from: Amazon.com. Brick and mortar stores will generally only carry the Life series, which, as I said, are CMC junk.
Recommended Posts