Blue screen after burning

[MagicOneFr]

Hello

Sometimes I have a blue screen immediately after imgburn has finished the write or verify process.

I have attached the dmp file. I hope it will help you.

 

I'm using win7 64bits. My drive is a "HL-DT-ST BD-RE  BH16NS55 1.01".

 

Thanks

103117-25303-01.dmp

[LIGHTNING UK!]

Possibly due to AnyDVD.

 

Make sure you're running the latest version. (8.2.0.0 at time of writing)

[dbminter]

Also, if you have AnyDVD running while burning a disc, you should disable it.  It's been years since it did this, so it may not anymore, but I always disable it when burning for that reason.  With it enabled and writing to 8x Ritek DVD+RW, the rewritable discs always failed Verify until they were completely erased with AnyDVD disabled.  It didn't do this on DVD-R or DVD+R DL.