cinderellen Posted February 29, 2020 Posted February 29, 2020 I have created an AVCHD iso file that, because of its size (7.5 GB), I need to burn a dual layer DVD. I have been reading various articles that refer to BDMV and Certificate folders which I don't know anything about. I've also read that in order to burn a dual layer in ImgBurn, that I need to use a VIDEO_TS file. I have not found information as to how to burn this AVCHD iso file onto a dual layer disc. I tried just burning this file through ImgBurn onto a dual layer DVD but that did not work. It does not play, either on DVD player or computer. So apparently I need more steps to successfully create. I'm in need of some guidance here if someone could kindly assist me. Thank you!
dbminter Posted February 29, 2020 Posted February 29, 2020 Since you say it's AVCHD, I'm guessing you're trying to make a Blu-Ray Video Disc. In that case, you'd need BDMV and Certificate folders in the root directory of your image. If you're creating a DVD Video Disc, you'll need a VIDEO_TS folder. The reason it's not playing could be a wide variety of causes. The BDMV/VIDEO_TS may not be compliant and thus doesn't play. That would be on whatever software you used to create the BDMV folder contents. I don't know if BDMV burned to a DVD+R DL will even work. I know the other way around, VIDEO_TS to BD-R, doesn't; I tested that myself. You may need a BD-R to get this to play, but I THOUGHT if your BDMV fit on a DVD+R DL, you COULD burn it to a DVD+R DL and get it to play on a BR player.
cinderellen Posted March 1, 2020 Author Posted March 1, 2020 Thanks. I am trying to burn a DVD video disc. I created the ISO file as output from ProShow Producer which I’ve used for 15 years - just not a video this large. I’ve always created an ISO file and used ImgBurn for the DVD. I’m a bit clueless as far as creating a VIDEO_TS file. I’m not trying to create a Blu-Ray as my clients don’t have Blu-Ray players. The only reason I’m using dual layer is because of the size of the file. I’m not seeing much on being able to do this. Maybe it’s not technologically feasible? Sure hope I can find a way of doing this. Thanks for your response. If you have any further suggestions, I’d surely appreciate them.
dbminter Posted March 1, 2020 Posted March 1, 2020 You keep mentioning trying to burn a file to create a DVD Video disc. That may be your problem. In order to get a DVD that plays on a DVD player, you have to have a VIDEO_TS folder. Is this ProShow Producer producing a VIDEO_TS folder, a file, or an ISO on its own you're trying to burn with ImgBurn? If you have a VIDEO_TS folder, the simplest way to do it is to use Build mode and add the VIDEO_TS folder to the job. ImgBurn will make all the necessary changes for DVD Video itself. Another thing that might help is post a log of one of these DVD Video disc images you burned that aren't playing on a DVD player. I have an idea that you may have a disc that works but the media manufacturer may be the reason it doesn't play in a DVD player. Under Help, choose ImgBurn Logs, open the log file, and copy and paste the necessary part of the log. Also, do you have PC software that can play DVD's? If so, try putting one of these discs that doesn't play in a DVD player into a PC drive and see if it plays on the software player.
cinderellen Posted March 5, 2020 Author Posted March 5, 2020 Thanks for the reply. My output from ProShow Producer is an ISO file that I then burn with ImgBurn. I have done this for many years with no problem until now - with the dual layer disc. There is no way to create a VIDEO_TS folder that I know of. It would appear that I am at a dead end trying to do this through ImgBurn - and perhaps other software as well. Thanks so much for trying to help.
dbminter Posted March 5, 2020 Posted March 5, 2020 And this is the first time you've gotten an ISO from ProShow that was larger than a DVD-5 and had to go to a DVD+R DL? If so, I would guess ProShow is not making compliant ISO files for DVD-9.
cinderellen Posted March 5, 2020 Author Posted March 5, 2020 Yes, it is. That could well be. I am trying one more strategy to burn this. I'll let you know. Not real hopeful but it's worth one more try. Thanks.
cinderellen Posted March 6, 2020 Author Posted March 6, 2020 Nope! Think I'm at a dead end. Cannot burn a dual layer which is what this file requires.
dbminter Posted March 6, 2020 Posted March 6, 2020 When you say you can't burn, you mean you can burn, right, it's just that the disc doesn't play? Try posting the log of a burn of a disc that doesn't play. I have an idea of what might be the problem. Although it wouldn't explain why it doesn't play on a PC. First, put one of these failed discs in a PC drive and open its contents in Windows/File Explorer. Is there a VIDEO_TS folder in the root directory? To get the log of a burn, in ImgBurn, under Help, ImgBurn Logs. The folder containing the logs opens. Open the log file, find the part of the log with a burn of one of these discs that doesn't play, and copy and paste the contents into a reply.
LIGHTNING UK! Posted March 6, 2020 Posted March 6, 2020 If you can't make it output a VIDEO_TS folder (only an ISO), mount the ISO in a virtual drive and point ImgBurn's Build mode at the drive letter of that drive. You can then burn a disc (or create a new ISO) from the contents of it.
dbminter Posted March 6, 2020 Posted March 6, 2020 Actually, I just came back here to say the same thing myself. This ProShow can make an ISO, mount the ISO, add the VIDEO_TS folder from the virtual drive into a Build job in ImgBurn, write a new image, and burn it. If the disc still fails to play, then it's either ProShow making improper VIDEO_TS or it could be the manufacturer of your DVD+R DL. Although that 2nd explanation doesn't explain away why it doesn't play on a PC.
cinderellen Posted March 6, 2020 Author Posted March 6, 2020 WOWIE - this is encouraging - thank you LIGHTING UK! and dbminter!! This is totally new territory for me so may take a little time to try this out. I'm running Windows 7 (I know!) so quick research tells me I need 3rd party software to accomplish virtual drive. Will certainly give this a try - THANKS!
LIGHTNING UK! Posted March 6, 2020 Posted March 6, 2020 Virtual Clonedrive will do the job nicely... and it's free
cinderellen Posted March 6, 2020 Author Posted March 6, 2020 Awesome - will definitely check this out - merci beaucoup!!
cinderellen Posted March 6, 2020 Author Posted March 6, 2020 Great - two votes so it's a winner! I just have to get a chance to work on this. THANKS!
dbminter Posted March 6, 2020 Posted March 6, 2020 As an added plus, it was just updated recently for the first time in 4 years. Of course, the first updated release introduced a new bug but it was quickly fixed in the most recent release.
Ch3vr0n Posted March 6, 2020 Posted March 6, 2020 Here's my third vote, been using it for yearsSent from my Pixel 3 XL using Tapatalk
dbminter Posted March 6, 2020 Posted March 6, 2020 I've been using it for over 5 years and I can't think of a single installation or usage issue with it except the bug introduced in the previous version that they quickly fixed. So, it's very reliable software. However, should you have an issue with it, Alcohol 120% Free Edition is something I've also experimented with. I used to use Alcohol 52% before I moved to Virtual CloneDrive.
cinderellen Posted March 7, 2020 Author Posted March 7, 2020 Thanks, y'all! As I mentioned, this is completely new territory for me. I have downloaded Virtual Clonedrive. I'm taking baby steps here. I have gone to my ISO file, right-clicked, and mounted Virtual Clonedrive, creating a drive H:. Things get a little fuzzy from here. (of course working at 3 AM is probably not the best time to try to work with something completely new!). I now see that magical VIDEO_TS file but not sure how to proceed from here.
LIGHTNING UK! Posted March 7, 2020 Posted March 7, 2020 Go into Build mode within ImgBurn and add H:\ to the source box.
cinderellen Posted March 7, 2020 Author Posted March 7, 2020 Oh boy - here I am again. I get a message - am I trying to burn Blu-ray. No, I am not. Once I select that I get another error message - cannot add file to image. ????
cinderellen Posted March 7, 2020 Author Posted March 7, 2020 What I am trying to burn in a dual layer disc playable in DVD player.
dbminter Posted March 7, 2020 Posted March 7, 2020 If you're adding a BDMV folder, it's a Blu-Ray. DVD Video is a folder called VIDEO_TS. The 2nd error message is because the file trying to be added is larger than 4 GB. For DVD Video, the file system doesn't allow files greater than 4 GB, I think. Blu-Ray Video discs do allow for such files. m2TS files are for Blu-Ray.
LIGHTNING UK! Posted March 7, 2020 Posted March 7, 2020 Oops, I’ve muddled up some of my posts by saying video_ts when your topic title clearly states it’s an avchd image. So yeah, what you’re doing is burning Blu-ray style hd content onto a dvd. You should allow the program to make the changes it recommends.
Recommended Posts