suspiciouscoffee Posted April 13, 2021 Posted April 13, 2021 (edited) Hello, I'm ready to go with imgBurn but at the bottom it says "Device Not Ready (Unknown (ASC: 0x09, ASCQ: 0x90))" and as such I cannot enter write mode. LOG: I 15:46:32 ImgBurn Version 2.5.8.0 started! I 15:46:32 Microsoft Windows 8 Core x64 Edition (6.2, Build 9200) I 15:46:32 Total Physical Memory: 16,740,972 KiB - Available: 9,772,104 KiB I 15:46:32 Initialising SPTI... I 15:46:32 Searching for SCSI / ATAPI devices... I 15:46:32 -> Drive 1 - Info: MATSHITA BD-MLT UJ260 1.00 (E:) (USB 2.0) I 15:46:32 Found 1 BD-RE XL! As best I can find, there is no firmware update available for my drive. The discs are BD-R DL by Phillips. Anyone know what's up? Edited April 13, 2021 by suspiciouscoffee
LIGHTNING UK! Posted April 13, 2021 Posted April 13, 2021 Try some other discs, your drive doesn’t appear to like those.
suspiciouscoffee Posted April 13, 2021 Author Posted April 13, 2021 Burner still wasn't recognizing anything and I was getting the same error. Turns out it was a power issue, the drive turned on but couldn't do anything beyond that, but I tried a different outlet on the wall and suddenly it was good to go. Thank you though.
dbminter Posted April 13, 2021 Posted April 13, 2021 Sounds like you've got a more serious problem in your wall outlet.
Recommended Posts