SwoleB Posted June 10, 2021 Posted June 10, 2021 While burning, the write speed will drop to 0 and not progress for hours. This is the first time I'm using the program, so if anyone can help that would be great. I 13:28:05 ImgBurn Version 2.5.8.0 started! I 13:28:05 Microsoft Windows 8 Core x64 Edition (6.2, Build 9200) I 13:28:05 Total Physical Memory: 16.709.544 KiB - Available: 14.198.896 KiB I 13:28:05 Initialising SPTI... I 13:28:05 Searching for SCSI / ATAPI devices... I 13:28:06 -> Drive 1 - Info: ATAPI iHAS124 E 4L08 (D:) (SATA) I 13:28:06 -> Drive 2 - Info: Slimtype EB1 HLE2 (E:) (USB 2.0) I 13:28:06 Found 1 DVD±RW/RAM and 1 BD-RE XL! I 13:28:17 Operation Started! I 13:28:17 Device: [0:0:0] Slimtype EB1 HLE2 (E:) (USB) I 13:28:17 Media Type: BD-R (Disc ID: CMCMAG-BA5-000) I 13:28:17 Media Supported Write Speeds: 2x; 4x; 6x I 13:28:17 Quick Erase: No I 13:28:17 Format Properly: Yes I 13:28:17 Format Size: Preferred I 13:28:17 Format Without Spare Areas: Yes I 13:28:18 Erasing Disc... I 13:28:18 If you don't want spare areas, there's no need to format this disc! I 13:28:18 Operation Successfully Completed! - Duration: 00:00:00 I 13:29:05 Operation Started! I 13:29:05 Device: [0:0:0] Slimtype EB1 HLE2 (E:) (USB) I 13:29:05 Media Type: BD-R (Disc ID: CMCMAG-BA5-000) I 13:29:05 Media Supported Write Speeds: 2x; 4x; 6x I 13:29:05 Quick Erase: No I 13:29:05 Format Properly: Yes I 13:29:05 Format Size: Preferred I 13:29:05 Format Without Spare Areas: Yes I 13:29:05 Erasing Disc... I 13:29:05 If you don't want spare areas, there's no need to format this disc! I 13:29:05 Operation Successfully Completed! - Duration: 00:00:00 I 13:30:46 Operation Started! I 13:30:46 Source File: F:\Kortfilm\Troldejaeger AS 2\Troldejaerne del 1 og 2.iso I 13:30:46 Source File Sectors: 1.009.984 (MODE1/2048) I 13:30:46 Source File Size: 2.068.447.232 bytes I 13:30:46 Source File Volume Identifier: AVCHD I 13:30:46 Source File Volume Set Identifier: 52C9AC71000F6882 I 13:30:46 Source File Application Identifier: ImgBurn v2.5.8.0 I 13:30:46 Source File Implementation Identifier: ImgBurn I 13:30:46 Source File File System(s): UDF (2.50) I 13:30:46 Destination Device: [0:0:0] Slimtype EB1 HLE2 (E:) (USB) I 13:30:46 Destination Media Type: BD-R (Disc ID: CMCMAG-BA5-000) I 13:30:46 Destination Media Supported Write Speeds: 2x; 4x; 6x I 13:30:46 Destination Media Sectors: 12.219.392 I 13:30:46 Write Mode: BD I 13:30:46 Write Type: DAO I 13:30:46 Write Speed: 6x I 13:30:46 Hardware Defect Management Active: No I 13:30:46 BD-R Verify Not Required: Yes I 13:30:46 Link Size: Auto I 13:30:46 Lock Volume: Yes I 13:30:46 Test Mode: No I 13:30:46 OPC: No I 13:30:46 BURN-Proof: Enabled I 13:30:46 Write Speed Successfully Set! - Effective: 26.970 KB/s (6x) I 13:30:50 Filling Buffer... (80 MiB) I 13:30:52 Writing LeadIn... I 13:31:17 Writing Session 1 of 1... (1 Track, LBA: 0 - 1009983) I 13:31:17 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 1009983)
LIGHTNING UK! Posted June 10, 2021 Posted June 10, 2021 Your machine probably lost connection to the drive and the I/O request has basically got stuck. If you unplug the drive, the program may well eventually get an error back from the OS that it can show you. You are using the Y cable into 2 USB ports yeah? You need one to be USB 3.0 for the drive to achieve the speeds it's capable of, but it may also need that little bit of extra power USB 3 provides over usb 2.0
dbminter Posted June 10, 2021 Posted June 10, 2021 If what LUK suggested doesn't work, try not using CMC Magentics junk discs. I 13:28:17 Media Type: BD-R (Disc ID: CMCMAG-BA5-000) CMC Magnetics makes the worst discs out there. Over 50% of the problems on this board are caused by CMC junk. Most of those are usually resolved by switching away from CMC media.
Recommended Posts