GuckTube Posted September 24, 2022 Posted September 24, 2022 (edited) Hello, i just buy the DVD+R DL and burn xbox 360 games, when i try to put my disc into my drive, the current profile says DVD-R DL and when i burn it, i try to check the current profile again, its says DVD-ROM Logs before burn: HL-DT-ST DVDRAM GH24NS96 CT01 (SATA) Current Profile: DVD-R DL Disc Information: Status: Empty State of Last Session: Empty Erasable: No Free Sectors: 4,171,712 Free Space: 8,543,666,176 bytes Free Time: 927:04:62 (MM:SS:FF) Next Writable Address: 0 MID: PRINCORDL32 Supported Write Speeds: 4x, 8x DVD±R DL Boundary Information: L0 Data Zone Capacity: 2,092,896 Changeable: No DVD-R DL Shifted Middle Area: Start Address: 2,092,896 Changeable: Yes DVD-R DL Manual Layer Jump: Address: Not Specified Pre-recorded Information: Manufacturer ID: PRINCORDL32 Physical Format Information (Last Recorded): Disc ID: 0-00 Book Type: DVD-R Part Version: 6 Disc Size: 120 mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,566,527 Last Physical Sector in Layer 0: 2,289,503 Performance (Write Speed): Descriptor 1... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 4171711 (0x003FA7BF) -> RS: 16,620 KB/s (12x) - WS: 5,540 KB/s (4x) Descriptor 2... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 4171711 (0x003FA7BF) -> RS: 16,620 KB/s (12x) - WS: 11,080 KB/s (8x) Logs after burn: HL-DT-ST DVDRAM GH24NS96 CT01 (SATA) Current Profile: DVD-ROM Disc Information: Status: Complete State of Last Session: Complete Erasable: No Sessions: 1 Sectors: 3,827,488 Size: 7,838,695,424 bytes Time: 850:35:13 (MM:SS:FF) MID: PRINCORDL32 Supported Write Speeds: 4x, 8x TOC Information: Session 1... (LBA: 0) -> Track 01 (Mode 1, LBA: 0 - 3827487) -> LeadOut (LBA: 3827488) Pre-recorded Information: Manufacturer ID: PRINCORDL32 Physical Format Information (Last Recorded): Disc ID: 0-00 Book Type: DVD-R Part Version: 15 Disc Size: 120 mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,222,303 Last Physical Sector in Layer 0: 2,289,503 Performance (Write Speed): Descriptor 1... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 4171711 (0x003FA7BF) -> RS: 8,310 KB/s (6x) - WS: 5,540 KB/s (4x) Descriptor 2... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 4171711 (0x003FA7BF) -> RS: 8,310 KB/s (6x) - WS: 11,080 KB/s (8x) And then i cannot set layer break position Anyone can help me? Sorry if my grammar is bad Edited September 24, 2022 by GuckTube
LIGHTNING UK! Posted September 24, 2022 Posted September 24, 2022 They aren’t DVD+R DL discs, they’re DVD-R DL.
GuckTube Posted September 25, 2022 Author Posted September 25, 2022 (edited) Oh, so its not wrong in my dvd drive? Sorry bad grammar Edited September 25, 2022 by GuckTube
GuckTube Posted September 25, 2022 Author Posted September 25, 2022 And btw, i want to burn xbox 360 game to my dvd-r dl, but how?
Recommended Posts