Jump to content

TY02


the olde

Recommended Posts

the scan using the same media, same iso etc etc.

 

latest firmware, newish drive.

 

burnt at 4x setting and not max like the previous burn.

 

checked a couple of other discs burnt with IMGburn max setting, get the same awful result as my first post?

 

any ideas?

post-1595-1165173912_thumb.png

Edited by the olde
Link to comment
Share on other sites

are you saying that between the max burn and the 4X burn you updated the firmware if this is so and you want to experiment then try another at max or 8X. Since you haven't posted a log(it should be mandatory) I'm not really sure what the supported write speeds are with your media/drive

 

Quick look at the graph shows the red line (write speed ) maxing out at 8X.

look at the speed 8X cav so its not really burned at 4x

Again a log would confirm all this stuff like max write speed and average

Link to comment
Share on other sites

BENQ DVD DD DW1650 BCIC (ATA)

Current Profile: DVD-R

 

Disc Information:

Status: Empty

Erasable: No

Free Sectors: 2,298,496

Free Space: 4,707,319,808 bytes

Free Time: 510:48:46 (MM:SS:FF)

Supported Write Speeds: 2.4x, 4x, 8x

 

Pre-recorded Information:

Manufacturer ID: TYG02

or
BENQ DVD DD DW1650 BCIC (ATA)

Current Profile: DVD-R

 

Disc Information:

Status: Empty

Erasable: No

Free Sectors: 2,298,496

Free Space: 4,707,319,808 bytes

Free Time: 510:48:46 (MM:SS:FF)

Supported Write Speeds: 4x, 8x, 12x, 16x

 

Pre-recorded Information:

Manufacturer ID: TYG02

 

would be nice

Link to comment
Share on other sites

for the benq turn on overspeed and turn off wopc, burn at 16x and you might get a bad graph, looks like his disks are faulty towards the outer

part

 

you can get some good spikes at 12x with the nec's and L&D's

modded firmwares

Edited by chewy
Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.