dlewis06 Posted February 7, 2007 Share Posted February 7, 2007 Hello, I am having trouble with the software. I have updated the firmware, but I continue to get the following errors listed in the log. Here is my log: I 12:27:52 Source File: -==/\/[bUILD IMAGE]\/\==- I 12:27:52 Source File Sectors: 2,180,400 (MODE1/2048) I 12:27:52 Source File Size: 4,465,459,200 bytes I 12:27:52 Source File Volume Identifier: IRCHA2006 I 12:27:52 Source File Application Identifier: ImgBurn v2.1.0.0 I 12:27:52 Source File Implementation Identifier: ImgBurn I 12:27:52 Source File File System(s): UDF (1.02) I 12:27:52 Destination Device: [1:0:0] SONY DVD RW DRU-500A 2.1a (D:) (ATA) I 12:27:52 Destination Media Type: DVD-R (Disc ID: RITEKF1) (Speeds: 1x, 2x, 4x) I 12:27:52 Destination Media Sectors: 2,297,888 I 12:27:52 Write Mode: DVD I 12:27:52 Write Type: DAO I 12:27:52 Write Speed: 4x I 12:27:52 Link Size: Auto I 12:27:52 Test Mode: No I 12:27:52 BURN-Proof: Enabled I 12:27:53 Filling Buffer... I 12:27:55 Writing LeadIn... W 12:28:41 Failed to Write Sectors 2240 - 2271 - Power Calibration Area Error W 12:28:41 Retrying (1 of 20)... W 12:28:41 Retry Failed - Invalid Field in CDB W 12:28:41 Retrying (2 of 20)... W 12:28:41 Retry Failed - Invalid Field in CDB W 12:28:41 Retrying (3 of 20)... W 12:28:41 Retry Failed - Invalid Field in CDB W 12:28:41 Retrying (4 of 20)... W 12:28:41 Retry Failed - Invalid Field in CDB W 12:28:41 Retrying (5 of 20)... W 12:28:41 Retry Failed - Invalid Field in CDB W 12:28:41 Retrying (6 of 20)... W 12:28:41 Retry Failed - Invalid Field in CDB W 12:28:41 Retrying (7 of 20)... W 12:28:42 Retry Failed - Invalid Field in CDB W 12:28:42 Retrying (8 of 20)... W 12:28:42 Retry Failed - Invalid Field in CDB W 12:28:42 Retrying (9 of 20)... W 12:28:42 Retry Failed - Invalid Field in CDB W 12:28:42 Retrying (10 of 20)... W 12:28:42 Retry Failed - Invalid Field in CDB W 12:28:42 Retrying (11 of 20)... W 12:28:42 Retry Failed - Invalid Field in CDB W 12:28:42 Retrying (12 of 20)... W 12:28:42 Retry Failed - Invalid Field in CDB W 12:28:42 Retrying (13 of 20)... W 12:28:42 Retry Failed - Invalid Field in CDB W 12:28:42 Retrying (14 of 20)... W 12:28:42 Retry Failed - Invalid Field in CDB W 12:28:42 Retrying (15 of 20)... W 12:28:42 Retry Failed - Invalid Field in CDB W 12:28:42 Retrying (16 of 20)... W 12:28:42 Retry Failed - Invalid Field in CDB W 12:28:42 Retrying (17 of 20)... W 12:28:42 Retry Failed - Invalid Field in CDB W 12:28:42 Retrying (18 of 20)... W 12:28:42 Retry Failed - Invalid Field in CDB W 12:28:42 Retrying (19 of 20)... W 12:28:42 Retry Failed - Invalid Field in CDB W 12:28:42 Retrying (20 of 20)... W 12:28:42 Retry Failed - Invalid Field in CDB E 12:28:45 Failed to Write Sectors 2240 - 2271 - Power Calibration Area Error I 12:28:45 Synchronising Cache... It also sits at Synchronicing Cache. What am I doing wrong? Link to comment Share on other sites More sharing options...
dontasciime Posted February 7, 2007 Share Posted February 7, 2007 quite an old drive now, and i remember mine struggled towards the end still works but with Sony not updating past 2.1a it lacks the media codes of all the recent media codes from past 2 years maybe even longer. IF you could get hold of some ritek G04 you may have better luck, you may also find that the Sony will only burn them at 2X instead of 4X. So try and get some 4X media only (avoid 8x above etc) Link to comment Share on other sites More sharing options...
polopony Posted February 7, 2007 Share Posted February 7, 2007 W 12:28:41 Failed to Write Sectors 2240 - 2271 - Power Calibration Area Error definetly media related you can try to find some media that will work with the drive ,but its a really old drive by todays standards and like D says theres been no new firmware for quite some time for .I have a 510 A I'll throw in my computer and see if it will burn Verbs or Yudens OK will get back with an answer Link to comment Share on other sites More sharing options...
dlewis06 Posted February 7, 2007 Author Share Posted February 7, 2007 quite an old drive now, and i remember mine struggled towards the end still works but with Sony not updating past 2.1a it lacks the media codes of all the recent media codes from past 2 years maybe even longer. IF you could get hold of some ritek G04 you may have better luck, you may also find that the Sony will only burn them at 2X instead of 4X. So try and get some 4X media only (avoid 8x above etc) THanks for the info. I changed the speed to 2X and it burned to the DVD with out a problem. I inserted it into my DVD player, but the DVD player errors. I placed it in to another DVD on my laptop, and nothing happened. I open the explore window to see if there were files in the DVD, and there was not any. I did not see a Audio_ts to Video_ts directory. Any ideas? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted February 7, 2007 Share Posted February 7, 2007 Make sure you verify the disc as part of the burn process. At least then you'll know that the drive can read what it just wrote. Once we know it can, we'll look at why windows can't see it. Link to comment Share on other sites More sharing options...
polopony Posted February 7, 2007 Share Posted February 7, 2007 The media is pretty much garbage(RitekF1) thats the problem with your playback .I installed my Sony 510 A and burned a disc at 4x the drives max I used Verbatim -R 16x media see log below it verifyed perfect also. You might think about getting a new drive they're dirt cheap these days The Pioneer 111D is a good drive all the others I dont know theres been so many mergers and takeovers its hard to know who makes what drives, so many are rebadged .Looking for media I found half a spindle of Ritek GO4 the last good Riteks, GO5's ,so so and half aspindle of Taiyo Yuden -R 8x all I need is a drive that does scans I 14:34:13 ImgBurn Version 2.1.0.12 Beta started! I 14:34:13 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 1) I 14:34:13 Total Physical Memory: 785,888 KB - Available: 485,928 KB I 14:34:13 Initialising SPTI... I 14:34:13 Searching for SCSI / ATAPI devices... I 14:34:13 Found 2 DVD-ROMs and 1 DVD?RW! I 14:35:09 Operation Started! I 14:35:09 Source File: D:\THEIST.ISO I 14:35:09 Source File Sectors: 2,285,849 (MODE1/2048) I 14:35:09 Source File Size: 4,681,418,752 bytes I 14:35:09 Source File Volume Identifier: THEIST I 14:35:09 Source File Implementation Identifier: DVD Shrink I 14:35:09 Source File File System(s): ISO9660, UDF (1.02) I 14:35:09 Destination Device: [1:0:0] SONY DVD RW DRU-510A 1.1a (E:) (ATA) I 14:35:09 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 1x, 2x, 4x) I 14:35:09 Destination Media Sectors: 2,297,888 I 14:35:09 Write Mode: DVD I 14:35:09 Write Type: DAO I 14:35:09 Write Speed: 4x I 14:35:09 Link Size: Auto I 14:35:09 Test Mode: No I 14:35:09 BURN-Proof: Enabled I 14:35:34 Filling Buffer... (20 MB) I 14:35:36 Writing LeadIn... I 14:36:41 Writing Image... I 14:50:59 Synchronising Cache... I 14:51:33 Image MD5: 36785614c95242c6122097939f8987d1 I 14:51:33 Operation Successfully Completed! - Duration: 00:16:24 I 14:51:33 Average Write Rate: 5,328 KB/s (3.8x) - Maximum Write Rate: 5,603 KB/s (4.0x) I 14:51:33 Cycling Tray before Verify... W 14:51:40 Waiting for device to become ready... I 14:51:47 Device Ready! I 14:51:47 Operation Started! I 14:51:47 Source Device: [1:0:0] SONY DVD RW DRU-510A 1.1a (E:) (ATA) I 14:51:47 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: MCC 03RG20) (Speeds: 1x, 2x, 4x) I 14:51:47 Image File: D:\THEIST.ISO I 14:51:47 Image File Sectors: 2,285,849 (MODE1/2048) I 14:51:47 Image File Size: 4,681,418,752 bytes I 14:51:47 Image File Volume Identifier: THEIST I 14:51:47 Image File Implementation Identifier: DVD Shrink I 14:51:47 Image File File System(s): ISO9660, UDF (1.02) I 14:51:50 Verifying Sectors... (LBA: 0 - 2285848) I 15:01:59 Device MD5: 36785614c95242c6122097939f8987d1 I 15:01:59 Image MD5: 36785614c95242c6122097939f8987d1 I 15:02:04 Operation Successfully Completed! - Duration: 00:10:11 I 15:02:04 Average Verify Rate: 7,519 KB/s (5.4x) - Maximum Verify Rate: 10,122 KB/s (7.3x) Link to comment Share on other sites More sharing options...
dbminter Posted February 7, 2007 Share Posted February 7, 2007 I can definitely relate to Riteks behaving oddly on the 500a. They apparently changed the dye in some way because the 4x's stopped writing at 4x on the drive. All other 4x brands I tested wrote at 4x, but, the Riteks only at 2x. I would recommend what others have and try another brand and see how it goes. Link to comment Share on other sites More sharing options...
Recommended Posts