GVJeeper Posted March 15, 2007 Share Posted March 15, 2007 I have been using ImgBurn fine since January and now, in the last 2 weeks I keep getting this: It took 9 hours to get this far cuz I set it at 2x since 4x was what I was using and still getting the error. I'm new at all this and not a techy so I hope these screen shots uploaded (if not I'll post another msg with the text part). I also won't understand an answer full of tech terms so if you could tell me in laymen's (2nd grade, lol) terms that would be great. Any help is GREATLY appreciated. Here's the log: I 07:50:27 ImgBurn Version 2.1.0.0 started! I 07:50:27 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) W 07:50:27 Drive D:\ (FAT32) does not support single files > 4 GB I 07:50:27 Initialising SPTI... I 07:50:27 Searching for SCSI / ATAPI devices... I 07:50:27 Found 1 CD-RW, 1 DVD-ROM and 1 DVD?RW! I 07:52:14 Operation Started! I 07:52:14 Source File: C:\GUIDE_TO_RECOGNIZING_YOUR_SAINTS.ISO I 07:52:14 Source File Sectors: 2,285,856 (MODE1/2048) I 07:52:14 Source File Size: 4,681,433,088 bytes I 07:52:14 Source File Volume Identifier: GUIDE_TO_RECOGNIZING_YOUR_SAINTS I 07:52:14 Source File Implementation Identifier: DVD Shrink I 07:52:14 Source File File System(s): ISO9660, UDF (1.02) I 07:52:14 Destination Device: [1:0:0] PLEXTOR DVDR PX-740A 1.01 (E:) (ATA) I 07:52:14 Destination Media Type: DVD-R (Disc ID: SONY16D1) (Speeds: 2.4x, 4x, 8x, 12x, 16x) I 07:52:14 Destination Media Sectors: 2,298,496 I 07:52:14 Write Mode: DVD I 07:52:14 Write Type: DAO I 07:52:14 Write Speed: 2x I 07:52:14 Link Size: Auto I 07:52:14 Test Mode: No I 07:52:14 BURN-Proof: Enabled I 07:52:15 Filling Buffer... I 07:52:15 Writing LeadIn... I 07:52:33 Writing Image... W 17:40:07 Failed to Write Sectors 2273792 - 2273823 - Write Error W 17:40:07 Retrying (1 of 20)... W 17:40:07 Retry Failed - Invalid Address For Write W 17:40:07 Retrying (2 of 20)... W 17:40:07 Retry Failed - Invalid Address For Write W 17:40:07 Retrying (3 of 20)... W 17:40:07 Retry Failed - Invalid Address For Write W 17:40:07 Retrying (4 of 20)... W 17:40:07 Retry Failed - Invalid Address For Write W 17:40:07 Retrying (5 of 20)... W 17:40:07 Retry Failed - Invalid Address For Write W 17:40:07 Retrying (6 of 20)... W 17:40:07 Retry Failed - Invalid Address For Write W 17:40:07 Retrying (7 of 20)... W 17:40:07 Retry Failed - Invalid Address For Write W 17:40:07 Retrying (8 of 20)... W 17:40:07 Retry Failed - Invalid Address For Write W 17:40:07 Retrying (9 of 20)... W 17:40:07 Retry Failed - Invalid Address For Write W 17:40:07 Retrying (10 of 20)... W 17:40:07 Retry Failed - Invalid Address For Write W 17:40:07 Retrying (11 of 20)... W 17:40:07 Retry Failed - Invalid Address For Write W 17:40:07 Retrying (12 of 20)... W 17:40:07 Retry Failed - Invalid Address For Write W 17:40:07 Retrying (13 of 20)... W 17:40:07 Retry Failed - Invalid Address For Write W 17:40:07 Retrying (14 of 20)... W 17:40:07 Retry Failed - Invalid Address For Write W 17:40:07 Retrying (15 of 20)... W 17:40:07 Retry Failed - Invalid Address For Write W 17:40:07 Retrying (16 of 20)... W 17:40:07 Retry Failed - Invalid Address For Write W 17:40:07 Retrying (17 of 20)... W 17:40:07 Retry Failed - Invalid Address For Write W 17:40:07 Retrying (18 of 20)... W 17:40:08 Retry Failed - Invalid Address For Write W 17:40:08 Retrying (19 of 20)... W 17:40:08 Retry Failed - Invalid Address For Write W 17:40:08 Retrying (20 of 20)... W 17:40:08 Retry Failed - Invalid Address For Write E 06:52:50 Failed to Write Sectors 2273792 - 2273823 - Write Error I 06:52:51 Synchronising Cache... E 06:52:52 Failed to Write Image! E 06:52:54 Operation Failed! - Duration: 23:00:37 I 06:52:54 Average Write Rate: 54 KB/s (0.0x) - Maximum Write Rate: 3,308 KB/s (2.4x) Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted March 15, 2007 Share Posted March 15, 2007 Have you tried burning at the rated speed (16x) rather than 2x/4x? We've seen lots of issues with those sony discs lately... something tells me they're not very good at all. Check your firmware is up-to-date and get some Verbatim (MCC dye) or Taiyo Yuden discs instead. Link to comment Share on other sites More sharing options...
GVJeeper Posted March 15, 2007 Author Share Posted March 15, 2007 I was using the slower speed because I read that somewhere when I was setting all the software up. Update what firmware (see I told ya I'm not a techy, lol)??? Were to I get those disks....I'm in a small town in the mountains so have to order them online. Thanks...so far!! Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted March 15, 2007 Share Posted March 15, 2007 Firmware - http://www.plextor.be/download/ftp1/740A102.exe As for the discs, I dunno, you'll have to just checkout some online places that deliver to wherever you live. Here in the UK, I use www.svp.co.uk New version of ImgBurn - http://www.imgburn.com Link to comment Share on other sites More sharing options...
GVJeeper Posted March 15, 2007 Author Share Posted March 15, 2007 Will check out the firmware part tonight but want to add that I'm using the same 100 spindle of DVD and nothing else has changed...been doing fine since January then out of the blue this starts. Could it be that I should just uninstall all the software and reinstall...seems like the DVDs would have been a problem before now....just a thought. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted March 15, 2007 Share Posted March 15, 2007 These are hardware errors, uninstalling software won't (shouldn't) make the blindest bit of difference. The thing with drive / media combos is that you never know how well the burn has actually gone. (unless you scan them of course) You could buy some discs, burn a few, leave it 6 months and then fail to burn any more. The first few you burnt were probably awful burns but JUST good enough so the drive didn't error out. 6 months later after the media has deteriorated slightly and your drive is a bit older (and dirtier), it just tips itself over the edge and won't then burn. There's nothing you can do about it, these things just happen. Link to comment Share on other sites More sharing options...
GVJeeper Posted March 16, 2007 Author Share Posted March 16, 2007 Now I'm getting a "scratch" error (I had seen it a few times before) everytime I try. I've tried 4 different pre-recorded DVDs. Could I have more serious hardware problems than first thought (I updated the firmware last night). I also cleaned the DVDs after getting the error but still got the error. I know this isn't a RipIt forum but I'm thinking that if I'm having serious hardware problems that that could be the same reason I'm having trouble with ImgBurn. Here's the log with the error. Do you think I need a new drive? I 08:08:21: RipIt4Me Version 1.6.9.0 I 08:08:21: Starting 1-click Ripping Procedure at 08:08:18 I 08:08:21: Running Windows XP Service Pack 2 I 08:08:21: FixVTS version: 1.6.0.3 -- All OK I 08:08:21: DVD Decrypter version: 3.5.4.0 I 08:08:21: DVD Shrink version 3.2.0.15 I 08:08:21: _________________________ I 08:08:21: SPTI layer available I 08:08:21: _________________________ I 08:08:21: Ripping mode: Full Rip I 08:08:21: Main title(s): I 08:08:21: Title 1 (VTS 7 PGCs 1) -- 1:43:09s -- 16:9 I 08:08:21: Remove Protected Cells = On I 08:08:21: Remove Tiny Cells = On I 08:08:21: Remove Useless Menu Cells = On I 08:08:21: Bypass Annoying PGCs = Off I 08:08:21: Remove Last VTS = On I 08:08:21: Blank Bogus VTS = On I 08:08:21: Run FixVTS on Full DVD = On I 08:08:21: Rip JACKET_P folder = Off I 08:08:21: Copy IFO mode = 0 I 08:08:21: DVD Decrypter IFO parsing mode = 1 I 08:08:21: VOB Scan: Scan cells lasting less than: 300 I 08:08:21: BOV VOBU Stride = 30 I 08:08:21: I 08:08:21: Copying original IFOs into target directory I 08:08:21: DVD Volume Label: FAMILY_STONE_WS I 08:08:21: Loading IFOs I 08:08:21: Region code: 1 I 08:08:21: Video Format: NTSC I 08:08:21: Done opening IFOs I 08:08:21: Retrieving sectors from DVD drive I 08:08:21: CRC32 value = 0x96A7ABB1 I 08:08:21: Creating Protected Sector List (PSL) file I 08:08:21: Done creating PSL file I 08:08:21: Found no unreferenced titleset. I 08:08:21: Waiting for Decrypter to be ready I 08:08:25: Done importing the PSL file, now starting ripping... I 08:21:33: Done ripping ... I 08:21:33: Decrypter ripping time: 00:13:12 I 08:21:34: Loading IFOs I 08:21:34: DVD is region-free I 08:21:36: Scanning VTS 2 for BOVs I 08:21:36: Scanning VTS 3 for BOVs I 08:21:37: Scanning VTS 4 for BOVs I 08:21:37: Scanning VTS 5 for BOVs I 08:21:37: Scanning VTS 6 for BOVs I 08:21:38: Scanning VTS 7 for BOVs I 08:21:44: Scanning VTS 8 for BOVs I 08:21:44: Scanning VTS 9 for BOVs I 08:21:44: Scanning VTS 10 for BOVs I 08:21:44: Scanning VTS 11 for BOVs I 08:21:44: 0 Button(s) Over Video found in all VTS I 08:21:44: Video Format: NTSC I 08:21:44: VTS 7 PGC 1 Cell 21 is protected I 08:21:44: VTS 7 PGC 1 Cell 22 is protected I 08:21:44: VTS 7 PGC 1 Cell 23 is protected I 08:21:44: VTS 7 PGC 1 Cell 24 is protected I 08:21:44: Found 4 protected cells I 08:21:44: Found no unreferenced titleset. I 08:21:44: Analysing DVD structure I 08:21:44: MD = 400 I 08:21:44: MV = 50 I 08:21:44: BOR = 1 I 08:21:44: BON = 1 I 08:21:44: REB = 1 I 08:21:44: BOS = 1 I 08:22:13: I 08:22:13: I 08:22:13: Analysis done I 08:22:13: Checking for potential read errors caused by scratches on the disc. I 08:22:13: WARNING: Possible scratch/dirt on VTS 7 PGC 1 Cell 21 I 08:22:13: WARNING: Possible scratch/dirt on VTS 7 PGC 1 Cell 22 I 08:22:13: WARNING: Possible scratch/dirt on VTS 7 PGC 1 Cell 23 I 08:22:13: WARNING: Possible scratch/dirt on VTS 7 PGC 1 Cell 24 I 13:21:01: Canceling cleanup phase I 13:21:01: Done at 13:21:01 I 13:21:01: Elapsed time: 05:12:43 Link to comment Share on other sites More sharing options...
Altercuno Posted March 16, 2007 Share Posted March 16, 2007 Hi GV how are you? Nobody will be able to answer anything about ripping here due to legal reasons. That's my understanding anyway... Link to comment Share on other sites More sharing options...
polopony Posted March 16, 2007 Share Posted March 16, 2007 Hi GV how are you? Nobody will be able to answer anything about ripping here due to legal reasons. That's my understanding anyway... Altercuno is 100% right we can't help you with any ripping problems ,DVD Decrypter was shut down for its ripping ability and we wont jepordize IB by offering advice on ripping, sorry Link to comment Share on other sites More sharing options...
GVJeeper Posted March 16, 2007 Author Share Posted March 16, 2007 OK sorry, I didn't know that. Link to comment Share on other sites More sharing options...
blutach Posted March 17, 2007 Share Posted March 17, 2007 I also fail to see what ripping a DVD has to do with burning onto a blank. Regards Link to comment Share on other sites More sharing options...
Recommended Posts