Jump to content

Verify errors out at 50% everytime. It's not the media.


Eric N
 Share

Recommended Posts

It seems to write fine, but then gives me an error at 50% on verify everytime. SL media burns fine. Help.

 

Using IB 2.3.2.0.

Using Playo DVD+R DL 2.4x media but burning at slowest speed.

TSSTcorp DVD+-R TS-H653A with current firmware D500.

 

Here's why I know it's not the media... Just migrated from an older computer with a Pioneer DL drive that burned the same media fine with the same version of ImgBurn.

 

Here are the two most recent error logs...

 

; //****************************************\\

; ImgBurn Version 2.3.2.0 - Log

; Thursday, 19 April 2007, 16:45:19

; \\****************************************//

;

;

I 15:49:11 ImgBurn Version 2.3.2.0 started!

I 15:49:11 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2)

I 15:49:11 Total Physical Memory: 2,094,952 KB - Available: 1,665,564 KB

I 15:49:11 Initialising SPTI...

I 15:49:11 Searching for SCSI / ATAPI devices...

I 15:49:11 Found 1 DVD-ROM and 1 DVD?RW!

I 15:49:28 Operation Started!

I 15:49:28 Source File: C:\DVD\The Natural Disc 1.MDS

I 15:49:28 Source File Sectors: 3,909,712 (MODE1/2048)

I 15:49:28 Source File Size: 8,007,090,176 bytes

I 15:49:28 Source File Volume Identifier: The Natural Disc 1

I 15:49:28 Source File Implementation Identifier: DVDAfterEdit

I 15:49:28 Source File File System(s): ISO9660, UDF (1.02)

I 15:49:28 Destination Device: [0:2:0] TSSTcorp DVD+-RW TS-H653A D500 (E:) (ATAPI)

I 15:49:28 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D00-01) (Speeds: 2.4x)

I 15:49:28 Destination Media Sectors: 4,173,824

I 15:49:28 Write Mode: DVD

I 15:49:28 Write Type: DAO

I 15:49:28 Write Speed: 1x

I 15:49:28 Link Size: Auto

I 15:49:28 Test Mode: No

I 15:49:28 BURN-Proof: Enabled

I 15:49:28 Optimal L0 Data Zone Capacity: 2,018,128

I 15:49:28 Optimal L0 Data Zone Method: Copied From Original Disc

I 15:50:29 Filling Buffer... (40 MB)

I 15:50:30 Writing LeadIn...

I 15:50:42 Writing Image... (LBA: 0 - 3909711)

I 15:50:42 Writing Layer 0... (LBA: 0 - 2018127)

I 16:11:01 Writing Layer 1... (LBA: 2018128 - 3909711)

I 16:30:14 Synchronising Cache...

I 16:30:15 Closing Track...

I 16:30:25 Finalising Disc...

I 16:32:47 Image MD5: 29095be16a9f6c0243f29c6a020ee4d0

I 16:32:48 Operation Successfully Completed! - Duration: 00:43:19

I 16:32:48 Average Write Rate: 3,296 KB/s (2.4x) - Maximum Write Rate: 3,413 KB/s (2.5x)

I 16:32:48 Cycling Tray before Verify...

W 16:32:55 Waiting for device to become ready...

I 16:35:21 Device Ready!

I 16:35:22 Operation Started!

I 16:35:22 Source Device: [0:2:0] TSSTcorp DVD+-RW TS-H653A D500 (E:) (ATAPI)

I 16:35:22 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: RICOHJPN-D00-01) (Speeds: 2.4x)

I 16:35:22 Image File: C:\DVD\The Natural Disc 1.MDS

I 16:35:22 Image File Sectors: 3,909,712 (MODE1/2048)

I 16:35:22 Image File Size: 8,007,090,176 bytes

I 16:35:22 Image File Volume Identifier: The Natural Disc 1

I 16:35:22 Image File Implementation Identifier: DVDAfterEdit

I 16:35:22 Image File File System(s): ISO9660, UDF (1.02)

I 16:35:22 Verifying Sectors... (LBA: 0 - 3909711)

I 16:35:22 Verifying Layer 0... (LBA: 0 - 2018127)

I 16:44:04 Verifying Layer 1... (LBA: 2018128 - 3909711)

W 16:44:29 Failed to Read Sector 2018128 - Timeout on Logical Unit

W 16:44:29 Sector 2018128 maps to File: VIDEO_TS\VTS_01_4.VOB

W 16:44:37 Failed to Read Sector 2018129 - Timeout on Logical Unit

W 16:44:37 Sector 2018129 maps to File: VIDEO_TS\VTS_01_4.VOB

E 16:44:46 Failed to Read Sector 2018130 - Timeout on Logical Unit

E 16:44:46 Sector 2018130 maps to File: VIDEO_TS\VTS_01_4.VOB

E 16:44:46 Failed to Verify Sectors!

E 16:44:46 Operation Failed! - Duration: 00:09:24

I 16:44:46 Average Verify Rate: 7,156 KB/s (5.2x) - Maximum Verify Rate: 11,369 KB/s (8.2x)

I 16:45:19 Close Request Acknowledged

I 16:45:19 Closing Down...

I 16:45:19 Shutting down SPTI...

I 16:45:19 ImgBurn closed!

;

;

;

; //****************************************\\

; ImgBurn Version 2.3.2.0 - Log

; Tuesday, 17 April 2007, 19:59:34

; \\****************************************//

;

;

I 18:57:02 ImgBurn Version 2.3.2.0 started!

I 18:57:02 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2)

I 18:57:02 Total Physical Memory: 2,094,952 KB - Available: 1,660,628 KB

I 18:57:02 Initialising SPTI...

I 18:57:02 Searching for SCSI / ATAPI devices...

I 18:57:02 Found 1 DVD-ROM and 1 DVD?RW!

I 18:58:15 Operation Started!

I 18:58:15 Source File: C:\DVD\LAST_KING_OF_SCOTLAND.MDS

I 18:58:15 Source File Sectors: 3,855,023 (MODE1/2048)

I 18:58:15 Source File Size: 7,895,087,104 bytes

I 18:58:15 Source File Volume Identifier: LAST_KING_OF_SCOTLAND

I 18:58:15 Source File Implementation Identifier: MEI

I 18:58:15 Source File File System(s): ISO9660, UDF (1.02)

I 18:58:15 Destination Device: [0:2:0] TSSTcorp DVD+-RW TS-H653A D500 (E:) (ATAPI)

I 18:58:15 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D00-01) (Speeds: 2.4x)

I 18:58:15 Destination Media Sectors: 4,173,824

I 18:58:15 Write Mode: DVD

I 18:58:15 Write Type: DAO

I 18:58:15 Write Speed: 1x

I 18:58:15 Link Size: Auto

I 18:58:15 Test Mode: No

I 18:58:15 BURN-Proof: Enabled

I 18:58:15 Optimal L0 Data Zone Capacity: 1,927,520

I 18:58:15 Optimal L0 Data Zone Method: Copied From Original Disc

I 18:59:14 Filling Buffer... (40 MB)

I 18:59:15 Writing LeadIn...

I 18:59:29 Writing Image... (LBA: 0 - 3855022)

I 18:59:29 Writing Layer 0... (LBA: 0 - 1927519)

I 19:18:53 Writing Layer 1... (LBA: 1927520 - 3855022)

I 19:38:28 Synchronising Cache...

I 19:38:29 Closing Track...

I 19:38:42 Finalising Disc...

I 19:39:48 Image MD5: 892d99231722a0b1a2eb01175626eb3c

I 19:39:48 Operation Successfully Completed! - Duration: 00:41:32

I 19:39:48 Average Write Rate: 3,296 KB/s (2.4x) - Maximum Write Rate: 3,413 KB/s (2.5x)

I 19:39:48 Cycling Tray before Verify...

W 19:39:55 Waiting for device to become ready...

I 19:41:10 Device Ready!

I 19:41:10 Operation Started!

I 19:41:10 Source Device: [0:2:0] TSSTcorp DVD+-RW TS-H653A D500 (E:) (ATAPI)

I 19:41:10 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: RICOHJPN-D00-01) (Speeds: 2.4x)

I 19:41:10 Image File: C:\DVD\LAST_KING_OF_SCOTLAND.MDS

I 19:41:10 Image File Sectors: 3,855,023 (MODE1/2048)

I 19:41:10 Image File Size: 7,895,087,104 bytes

I 19:41:10 Image File Volume Identifier: LAST_KING_OF_SCOTLAND

I 19:41:10 Image File Implementation Identifier: MEI

I 19:41:10 Image File File System(s): ISO9660, UDF (1.02)

I 19:41:10 Verifying Sectors... (LBA: 0 - 3855022)

I 19:41:10 Verifying Layer 0... (LBA: 0 - 1927519)

I 19:49:36 Verifying Layer 1... (LBA: 1927520 - 3855022)

E 19:52:41 Failed to Read Sector 1927520 - Timeout on Logical Unit

E 19:52:41 Sector 1927520 maps to File: VIDEO_TS\VTS_04_4.VOB

E 19:52:41 Failed to Verify Sectors!

E 19:52:41 Operation Failed! - Duration: 00:11:30

I 19:52:41 Average Verify Rate: 5,587 KB/s (4.0x) - Maximum Verify Rate: 11,132 KB/s (8.0x)

I 19:59:34 Close Request Acknowledged

I 19:59:34 Closing Down...

I 19:59:34 Shutting down SPTI...

I 19:59:34 ImgBurn closed!

Link to comment
Share on other sites

Well you can see the problem, the drive won't read anything from the second layer and just times out. That's not the program timing out, that's the actual drive timing out.

 

Until you've tried some other DL discs (Verbatims), you can possibly say 'It's not the media'. Just because your last drive was ok with it, it doesn't mean your new one will be - clearly it's not.

 

Speak to Dell and ask why the drive can't read from the 2nd layer on that media. Maybe they'll fix the firmware?!

 

btw, attempting 1x with that drive/media combo isn't going to do anything.

 

The drive / program clearly states that only 2.4x is supported/possible.

 

I 18:58:15 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D00-01) (Speeds: 2.4x)

I 18:58:15 Destination Media Sectors: 4,173,824

I 18:58:15 Write Mode: DVD

I 18:58:15 Write Type: DAO

I 18:58:15 Write Speed: 1x

Link to comment
Share on other sites

Understood.

 

So should I try a write again but at 2.4x speed or is it being forced to write at that speed already?

 

I'll try a new DL media. Sounds like Verbatim is the way to go, based on the posts on this forum.

Link to comment
Share on other sites

Nope, the drive would just ignore the 1x request and use the closest to it that it DOES support. No point in trying it again.

 

Yes, verbatims are the ONLY way to go!

 

Try to get the MKM-001-00 version (2.4x) rather than the MKM-003-00 (8x) ones. You'll probably have more luck with them because they're THE standard in DL discs.

Link to comment
Share on other sites

Thanks for your help, Lightning.

 

Just tried Memorex 2.4x DVD+R DL media. Same problem.

I just bought some Verbatim and I'm crossing my fingers.

 

Memorex error...

 

<clip>

I 15:06:20 Verifying Sectors... (LBA: 0 - 3934617)

I 15:06:20 Verifying Layer 0... (LBA: 0 - 1972943)

I 15:14:53 Verifying Layer 1... (LBA: 1972944 - 3934617)

W 15:50:16 Failed to Read Sector 1972944 - Timeout on Logical Unit

W 15:50:16 Sector 1972944 maps to File: VIDEO_TS\VTS_01_4.VOB

E 15:50:25 Failed to Read Sector 1972945 - Timeout on Logical Unit

E 15:50:25 Sector 1972945 maps to File: VIDEO_TS\VTS_01_4.VOB

E 15:50:25 Failed to Verify Sectors!

E 15:50:25 Operation Failed! - Duration: 00:44:05

I 15:50:25 Average Verify Rate: 1,491 KB/s (1.1x) - Maximum Verify Rate: 11,263 KB/s (8.1x)

I 15:50:32 Close Request Acknowledged

I 15:50:32 Closing Down...

I 15:50:32 Shutting down SPTI...

I 15:50:32 ImgBurn closed!

Link to comment
Share on other sites

Most times the burning has reached around 51% and failed and Given me a servo fail error, could any

offer any recommendations or changes i could make.

 

I have pasted my last log below. many thanks

 

I 22:20:30 ImgBurn Version 2.3.2.0 started!

I 22:20:30 Microsoft Windows XP vista ultimate

I 22:20:30 Total Physical Memory: 522,316 KB - Available: 193,420 KB

I 22:20:30 Initialising SPTI...

I 22:20:30 Searching for SCSI / ATAPI devices...

I 22:20:30 Found 1 DVD-ROM and 1 DVD?RW!

I 22:56:37 Operation Started!

I 22:56:37 Source File: C:\Documents and Settings\danny\My Documents\My eBooks\Crackdown.PAL.XBOX360-DNL\IMAGE.dvd

I 22:56:37 Source File Sectors: 3,697,696 (MODE1/2048)

I 22:56:37 Source File Size: 7,572,881,408 bytes

I 22:56:37 Source File Volume Identifier: XBOX360

I 22:56:37 Source File Implementation Identifier: Daikin U.S. Comtec Lab

I 22:56:37 Source File File System(s): ISO9660, UDF (1.02)

I 22:56:37 Destination Device: [1:0:0] pioneerDVD 111D (D:) (ATA)

I 22:56:37 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-02) (Speeds: 4x)

I 22:56:37 Destination Media Sectors: 4,173,824

I 22:56:37 Write Mode: DVD

I 22:56:37 Write Type: DAO

I 22:56:37 Write Speed: 2x

I 22:56:37 Link Size: Auto

I 22:56:37 Test Mode: No

I 22:56:37 BURN-Proof: Enabled

I 22:56:37 Optimal L0 Data Zone Capacity: 1,913,760

I 22:56:37 Optimal L0 Data Zone Method: Copied From Original Disc

I 22:56:37 Filling Buffer... (20 MB)

I 22:56:38 Writing LeadIn...

I 22:57:12 Writing Image... (LBA: 0 - 3697695)

I 22:57:12 Writing Layer 0... (LBA: 0 - 1913759)

I 23:09:01 Writing Layer 1... (LBA: 1913760 - 3697695)

W 23:09:06 Failed to Write Sectors 1917280 - 1917311 - Spindle Servo Failure

W 23:09:06 Retrying (1 of 20)...

W 23:09:06 Retry Failed - No Seek Complete

W 23:09:06 Retrying (2 of 20)...

W 23:09:06 Retry Failed - Invalid Address For Write

W 23:09:06 Retrying (3 of 20)...

W 23:09:06 Retry Failed - Invalid Address For Write

W 23:09:06 Retrying (4 of 20)...

W 23:09:06 Retry Failed - Invalid Address For Write

W 23:09:06 Retrying (5 of 20)...

W 23:09:06 Retry Failed - Invalid Address For Write

W 23:09:06 Retrying (6 of 20)...

W 23:09:06 Retry Failed - Invalid Address For Write

W 23:09:06 Retrying (7 of 20)...

W 23:09:06 Retry Failed - Invalid Address For Write

W 23:09:06 Retrying (8 of 20)...

W 23:09:06 Retry Failed - Invalid Address For Write

W 23:09:06 Retrying (9 of 20)...

W 23:09:06 Retry Failed - Invalid Address For Write

W 23:09:06 Retrying (10 of 20)...

W 23:09:06 Retry Failed - Invalid Address For Write

W 23:09:06 Retrying (11 of 20)...

W 23:09:06 Retry Failed - Invalid Address For Write

W 23:09:06 Retrying (12 of 20)...

W 23:09:06 Retry Failed - Invalid Address For Write

W 23:09:06 Retrying (13 of 20)...

W 23:09:06 Retry Failed - Invalid Address For Write

W 23:09:06 Retrying (14 of 20)...

W 23:09:06 Retry Failed - Invalid Address For Write

W 23:09:06 Retrying (15 of 20)...

W 23:09:06 Retry Failed - Invalid Address For Write

W 23:09:06 Retrying (16 of 20)...

W 23:09:06 Retry Failed - Invalid Address For Write

W 23:09:06 Retrying (17 of 20)...

W 23:09:06 Retry Failed - Invalid Address For Write

W 23:09:06 Retrying (18 of 20)...

W 23:09:06 Retry Failed - Invalid Address For Write

W 23:09:06 Retrying (19 of 20)...

W 23:09:06 Retry Failed - Invalid Address For Write

W 23:09:06 Retrying (20 of 20)...

W 23:09:06 Retry Failed - Invalid Address For Write

W 23:09:49 Retrying (21)...

W 23:09:49 Retry Failed - Invalid Address For Write

W 23:09:50 Retrying (22)...

W 23:09:50 Retry Failed - Invalid Address For Write

W 23:09:51 Retrying (23)...

W 23:09:51 Retry Failed - Invalid Address For Write

W 23:09:52 Retrying (24)...

W 23:09:52 Retry Failed - Invalid Address For Write

W 23:09:52 Retrying (25)...

W 23:09:52 Retry Failed - Invalid Address For Write

W 23:09:52 Retrying (26)...

W 23:09:52 Retry Failed - Invalid Address For Write

W 23:09:53 Retrying (27)...

W 23:09:53 Retry Failed - Invalid Address For Write

W 23:09:53 Retrying (28)...

W 23:09:53 Retry Failed - Invalid Address For Write

W 23:09:53 Retrying (29)...

W 23:09:53 Retry Failed - Invalid Address For Write

W 23:09:53 Retrying (30)...

W 23:09:53 Retry Failed - Invalid Address For Write

W 23:09:54 Retrying (31)...

W 23:09:54 Retry Failed - Invalid Address For Write

W 23:09:54 Retrying (32)...

W 23:09:54 Retry Failed - Invalid Address For Write

W 23:09:54 Retrying (33)...

W 23:09:54 Retry Failed - Invalid Address For Write

W 23:09:54 Retrying (34)...

W 23:09:54 Retry Failed - Invalid Address For Write

W 23:09:54 Retrying (35)...

W 23:09:54 Retry Failed - Invalid Address For Write

W 23:09:55 Retrying (36)...

W 23:09:55 Retry Failed - Invalid Address For Write

W 23:09:55 Retrying (37)...

W 23:09:55 Retry Failed - Invalid Address For Write

W 23:09:55 Retrying (38)...

W 23:09:55 Retry Failed - Invalid Address For Write

W 23:09:55 Retrying (39)...

W 23:09:55 Retry Failed - Invalid Address For Write

W 23:09:56 Retrying (40)...

W 23:09:56 Retry Failed - Invalid Address For Write

W 23:09:56 Retrying (41)...

W 23:09:56 Retry Failed - Invalid Address For Write

W 23:09:56 Retrying (42)...

W 23:09:56 Retry Failed - Invalid Address For Write

W 23:09:56 Retrying (43)...

W 23:09:56 Retry Failed - Invalid Address For Write

W 23:09:56 Retrying (44)...

W 23:09:56 Retry Failed - Invalid Address For Write

W 23:09:57 Retrying (45)...

W 23:09:57 Retry Failed - Invalid Address For Write

W 23:09:57 Retrying (46)...

W 23:09:57 Retry Failed - Invalid Address For Write

W 23:09:57 Retrying (47)...

W 23:09:57 Retry Failed - Invalid Address For Write

W 23:09:57 Retrying (48)...

W 23:09:57 Retry Failed - Invalid Address For Write

W 23:09:57 Retrying (49)...

W 23:09:57 Retry Failed - Invalid Address For Write

W 23:09:57 Retrying (50)...

W 23:09:58 Retry Failed - Invalid Address For Write

W 23:09:58 Retrying (51)...

W 23:09:58 Retry Failed - Invalid Address For Write

W 23:09:58 Retrying (52)...

W 23:09:58 Retry Failed - Invalid Address For Write

W 23:09:58 Retrying (53)...

W 23:09:58 Retry Failed - Invalid Address For Write

W 23:09:58 Retrying (54)...

W 23:09:58 Retry Failed - Invalid Address For Write

W 23:09:58 Retrying (55)...

W 23:09:58 Retry Failed - Invalid Address For Write

E 23:10:02 Failed to Write Sectors 1917280 - 1917311 - Spindle Servo Failure

I 23:10:02 Synchronising Cache...

I 23:10:03 Closing Track...

I 23:10:04 Finalising Disc...

E 23:10:05 Failed to Write Image!

E 23:10:05 Operation Failed! - Duration: 00:13:28

I 23:10:05 Average Write Rate: 4,979 KB/s (3.6x) - Maximum Write Rate: 5,618 KB/s (4.1x)

Link to comment
Share on other sites

Most times the burning has reached around 51% and failed and Given me a servo fail error, could any

offer any recommendations or changes i could make.

 

you want recommendations then start with good media Verbatim Dual Layer discs are the ONLY media that work right time after time, changing from garbage media to more garbage media is not going to help you , eleminate the media problem first then we can see if thats the problem and go from there

Link to comment
Share on other sites

Up here in Canada Verbatim DL's are no more expensive than any other brand, yet of the 200+ I've burned, I've only had 1 failure and 2 poor burns. Of the 75ish non Verbatim DL's I've burned, 13 coasters. Don't mess about with anything but Verb DL's, it's not worth the time, and the money is the same.

Link to comment
Share on other sites

Update:

 

I flashed the drive with the Samsung SH-S183a firmware (original mfgr of this TSST drive). Same error on DL. So I went back to the TSST firmware.

 

Then got the Verbatim media, and all is good again. No errors on 2 DL burns (that gave me errors before). I guess I'm a customer for life.

 

Thanks again,

Eric

Link to comment
Share on other sites

 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.