SGSeeker Posted May 29, 2007 Posted May 29, 2007 Everything was fine with my TYG03 Media on a Pioneer 111L drive with 8.29 firmware. I've burned some sony dvd-rw's fine yesterday, so I'm not sure whats up. Between my last TY burn and the latest, I had my LiteOn drive plugged in to do some quality scans. After switching back, ImgBurn doesn't 100% switch to dvd-mode after I select an image (speed listings are still shown for cd-r's - 56x max, details box shows that the software knows thats its a dvd-r though with 4x, 8x, 12x, 16x write speeds) on either my TY or Ritek media. Here's the thing...Nero still works 100% without error and the discs play fine. I've tried uninstalling and reinstalling ImgBurn with no success. Ideas?
mmalves Posted May 29, 2007 Posted May 29, 2007 If you're talking about the Write Speed selector, it always shows the full list, regardless of the media inserted.
SGSeeker Posted May 29, 2007 Author Posted May 29, 2007 Was this something recent? I'm fairly certain that didn't used to be the case. I had some old media that only gave me 1x/2x in the drop down menu. Perhaps it was another small program I'm thinking of. Still doesn't explain my failing burn though (after the first coaster, tried a couple different things and another image in test mode. Same failures.).
mmalves Posted May 29, 2007 Posted May 29, 2007 Nope, it always displayed the full list About your problem, could you describe it? Also, please post the log from those bad burns (they're automatically saved and acessible in Help/ImgBurn logs).
SGSeeker Posted May 29, 2007 Author Posted May 29, 2007 I 15:07:38 ImgBurn Version 2.3.2.0 started! I 15:07:38 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 15:07:38 Total Physical Memory: 2,096,620 KB - Available: 1,592,284 KB I 15:07:38 Initialising SPTI... I 15:07:38 Searching for SCSI / ATAPI devices... I 15:07:39 Found 1 DVD
SGSeeker Posted May 29, 2007 Author Posted May 29, 2007 (edited) I've tried switching to aspi with no luck. Uninstalling/reinstalling IDE controller driver, no luck. I just can't seem to get my Pioneer drive working again with ImgBurn after having the LiteOn 20a1h hooked up (Shuttle computer, only room for one drive at a time) for scanning. edit: 2x seems to work in ImgBurn, but nothing higher. These TY discs are best burned at 8x on my drive though... Edited May 29, 2007 by SGSeeker
mmalves Posted May 29, 2007 Posted May 29, 2007 You should leave I/O Interface as SPTI (default setting), as ASPI is only useful for people who can't use SPTI. Also, this problem is completely unrelated to the use of another burner before, as ImgBurn always gets the current configuration. ImgBurn can't force any burner to write at a specific speed: it'll send the command for the speed you've selected but it's up to the burner to obey or not. Most buners will use the closest available speed to what you've selected, and, in your case, it's 4x. I 15:08:45 Destination Media Type: DVD-R (Disc ID: TYG03) (Speeds: 4x, 6x, 8x, 12x, 16x) Has your burner seen a lot of use? Maybe you could try some cleaning kit on it.
SGSeeker Posted May 29, 2007 Author Posted May 29, 2007 Its seen about 25 dvd burns, no cd burns, and still works fine in Nero at 16x. Haven't had the best experience in Nero for a few years, scan quality included, so I'd like to skip it but if I can't get this software working again, it'll have to do.
LIGHTNING UK! Posted May 30, 2007 Posted May 30, 2007 If the drive is erroring out with a 'Write Error' error message, you can really only take it at face value - the drive failed to burn that/those sectors on the disc. Quite why that is, is anyone's guess! Try a few more and if you keep having the same problem, try switching the 'Write Type' in the setting to 'Packet / Incremental'.
SGSeeker Posted May 30, 2007 Author Posted May 30, 2007 I'm not sure what changed, but yesterday I scanned a burned disc at 2x and near the end PI problems spikes near the end of the disc and locked up the system. After a reboot, the system kept turning itself off after a few minutes inside windows (not overheating of power supply problem(voltmeter) though...weird. Memtest86 checks out fine also.). A 3rd or 4th reboot, the system started working correctly again and now I can burn at 16x without a problem? Not getting any hard drive corruption either, so I'm not sure whats up, but its working again. *shrugs* Doing a few more test burns to see if I can get it to fail again. I now have three TY Watershield coasters though...
Recommended Posts