ArNolDs Posted January 9, 2006 Posted January 9, 2006 My first attempts of burning an image (.iso) file using a number of tools has been disasterous. I didn't save the log but noticed DVDD failed at exactly 50%. I had one "success" but the DVD would not play. I started to try IMGBurn and noticed the TOOLS/ISO/Display IFO Layer Break Info/ tool. For the problem image I get: -------------------------------- Optimal L1 Data Zone Start LBA: not found! VTS_01 This image has not been mastered correctly for burning on to a double layer (OTP track path) disc. None of the cells meet the 'DVD-Video Specification' criteria for a potential layer break position. -------------------------------- Will I ever be able to burn this image to a DL? (I can't re-rip it and its 8+ GB and too big to shrink to a DVD+R). Is there anything that I can do? I used IMGTool Classic to create the ISO image. I got a warning that it was larger than a DVD5 and asked 'Do you still want to continue'. When creating the ISO image is there any software or procedure that is recommended?
LIGHTNING UK! Posted January 9, 2006 Posted January 9, 2006 Mount that ISO in Daemon Tools. Load up PgcEdit and point it at the Daemon Tools virtual drive. Then have PgcEdit recreate the ISO file - it will make a proper image (if possible) with a layer break position that can actually be used.
ArNolDs Posted January 9, 2006 Author Posted January 9, 2006 have PgcEdit recreate the ISO file - it will make a proper image (if possible) with a layer break position that can actually be used. Thanks. I used PGCEdit successfully on a different DVD's /video_ts directory that I'm having the same problem with and I am now beyond that message again. However, I am now about as far as I remember getting before, that is, STILL producing NOTHING but coasters. When backing up the successfully PGC'd iso file with IMGBurn I get write error messages, that seem to pass on retry. Then, the backup finishes with a "successful" backup message. But VERIFY mode croaks at the point of the write error messages and the DVD will not play (and no files show in explorer). I've included logs. Can anyone spot what I am doing wrong??? I am recently aware of RITEK discs' somewhat lowly reputation, but please don't tell me to get Verbatims unless it really looks like these problems are due to defective discs. BTW my very first unsuccessful attempt was on a one and only verbatim. Logs (3) ... ISO FROM \VIDEO_TS USING PGCEdit ... mkisofs log for DVD "xxxxx" From: "C:\Documents and Settings\snip\My Documents\xxxxx" DVD-TEXT General Name: "" Provider ID: "" Number of VTS: 7 Output file: "C:\Documents and Settings\snip\My Documents\xxxxx.ISO" Volume label: "xxxxx" mkisofs 2.01.01a03 X (i686-pc-cygwin) Layer break is at absolute sector 1899760. (Offset in L0 is 82631.) Layer break cell: 1817129: VTST 5 , 1 TTN 1 (1:43:15) Title 1 Cell 22 (00:04:43.25), V/CID: 2/1 '' : VTST 5 , 2 TTN 2 (1:44:08) Title 2 Cell 22 (00:04:43.25), V/CID: 2/1 The pad was 82631 for file VIDEO_TS.VOB Total translation table size: 0 Total rockridge attributes bytes: 0 Total directory bytes: 4248 Path table size(bytes): 42 Max brk space used 9000 3799511 extents written (7420 MB) ISO created OK. BURN W/ IMGBURN ... I 01:27:15 ImgBurn Version 1.1.0.0 started! I 01:27:15 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 01:27:15 Initialising SPTI... I 01:27:15 Searching for SCSI / ATAPI devices... I 01:27:15 Found 1 DVD?RW! I 01:30:31 Operation Started! I 01:30:31 Source File: C:\Documents and Settings\snip I 01:30:31 Source File Sectors: 3,799,511 (MODE1/2048) I 01:30:31 Source File Size: 7,781,398,528 bytes I 01:30:31 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR © 1993 E.YOUNGDALE © 1997 J.PEARSON/J.SCHILLING I 01:30:31 Source File Implementation Identifier: mkisofs I 01:30:31 Destination Device: [1:0:0] SONY DVD+-RW DW-D56A PDS7 (D:) (ATA) I 01:30:31 Destination Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 2.4x) I 01:30:31 Destination Media Sectors: 4,173,824 I 01:30:31 Write Mode: DVD I 01:30:31 Write Type: DAO I 01:30:31 Write Speed: MAX I 01:30:31 Link Size: Auto I 01:30:31 Test Mode: No I 01:30:31 BURN-Proof: Enabled I 01:30:46 Optimal L1 Data Zone Start LBA: 1899760 (VTS_05, PGC: 2, Cell: 22) I 01:30:46 Optimal L0 Data Zone Capacity: 1,899,760 I 01:30:46 Optimal L0 Data Zone Method: IFO Cell Boundary, 'SPLIP' Flag Not Set I 01:33:38 Filling Buffer... I 01:33:42 Writing LeadIn... I 01:33:44 Writing Image... I 01:33:44 Writing Layer 0... (LBA: 0 - 1899759) I 01:53:22 Writing Layer 1... (LBA: 1899760 - 3799510) W 01:54:46 Failed to Write Sectors 1899760 - 1899791 - Power Calibration Area Error W 01:54:46 Retrying (1 of 20)... I 01:54:46 Writing Image... I 02:14:29 Synchronising Cache... I 02:14:30 Closing Track... I 02:15:35 Finalising Disc... I 02:15:35 Operation Successfully Completed! - Duration: 00:45:03 I 02:15:35 Average Write Rate: 3,107 KB/s (2.2x) - Maximum Write Rate: 3,522 KB/s (2.5x) I 02:15:35 Cycling Tray before Verify... W 02:15:39 Waiting for device to become ready... I 02:16:03 Device ready! I 02:16:03 Operation Started! I 02:16:03 Source Device: [1:0:0] SONY DVD+-RW DW-D56A PDS7 (D:) (ATA) I 02:16:03 Source Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 2.4x) I 02:16:03 Image File: C:\Documents and Settings\snip I 02:16:03 Image File Sectors: 3,799,511 (MODE1/2048) I 02:16:03 Image File Size: 7,781,398,528 bytes I 02:16:03 Image File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR © 1993 E.YOUNGDALE © 1997 J.PEARSON/J.SCHILLING I 02:16:03 Image File Implementation Identifier: mkisofs I 02:16:03 Verifying Sectors... E 02:50:30 Failed to read Sector 2901846 - Unrecovered Read Error E 02:50:30 Failed to Verify Sectors! E 02:50:30 Operation Failed! - Duration: 00:34:27 I 02:50:30 Average Verify Rate: 2,807 KB/s (2.0x) - Maximum Verify Rate: 5,512 KB/s (4.0x) SONY DVD+-RW DW-D56A PDS7 (ATA) Current Profile: DVD+R DL Disc Information: Status: Incomplete Erasable: No Sessions: 1 Supported Write Speeds: 2.4x DVD?R DL Boundary Information: L0 Data Zone Capacity: 1,899,760 Changeable: No Physical Format Information (ADIP): Disc ID: RITEK-D01-01 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (Last Recorded): Disc ID: RITEK-D01-01 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519
LIGHTNING UK! Posted January 9, 2006 Posted January 9, 2006 Only 1 piece of advice here... avoid RITEK DL discs like the plague! Get some Verbatims and I'm sure you'll have much more luck. Yes, they do cost more, but there is a good reason for that - they work!
ArNolDs Posted January 9, 2006 Author Posted January 9, 2006 Get some Verbatims and I'm sure you'll have much more luck. I think these have all been failing at the DL boundary. Given that do u think I could called these discs "defective" and return send them right &^&@^%-ing back? But given consistent failing at the boundary and the unsuccessful try with Verbatims, could the SONY drive be the problem? (It's quite new and I don't think dirt could be the problem).
Grain Posted January 9, 2006 Posted January 9, 2006 I'd try returning them either way. Those are poor discs by almost everyones standard, and the sooner Ritek catches on that people won't pay good money for shite the better.
LIGHTNING UK! Posted January 9, 2006 Posted January 9, 2006 Yeah try and send them back and get verbatims instead. Also, your burner (OEM LiteOn 852) is actually quite an old one now (by todays standards), it's quite possible that hardware/firmware isn't great for DL burning.
lfcrule1972 Posted January 10, 2006 Posted January 10, 2006 I always send back discs that are defective - if the online retailer is worth anything they will replace them for you.
Movie Junkie Posted January 11, 2006 Posted January 11, 2006 Get some Verbatims and I'm sure you'll have much more luck. I think these have all been failing at the DL boundary. Given that do u think I could called these discs "defective" and return send them right &^&@^%-ing back? But given consistent failing at the boundary and the unsuccessful try with Verbatims, could the SONY drive be the problem? (It's quite new and I don't think dirt could be the problem). One of my two Sony drives (DRU710A) is starting to fail and the problem I am having with it is reading some DL discs past the layer-break. This problem is showing up on pressed and DVD+R DL discs. I am going to be replacing the defective drive and I might replace the other one at the same time. Both drives are just 15 months old.
ArNolDs Posted January 11, 2006 Author Posted January 11, 2006 (edited) Thanks for all the help and suggestions. OK. I lost a couple more $1.95 Ritek trash and then went out and got myself some really really really expensive Verbatims. I copied a fresh DVD from disc using DVDD and tried ImgBurns ISO/Check layer boundary and it was alright. Then I used IMGBurn again to write the disc to a blank Verbatim. This burn, too, died in the same way as all others have (some fails using programs other than IMGBurn). At the very start of the burn I get error messages (see attached .gif). Retries result in another same message. When I cancel it goes on to apparently write data on the whole disc. I 10:32:15 Filling Buffer... I 10:32:19 Writing LeadIn... W 10:32:49 Failed to Write Sectors 0 - 31 - Power Calibration Area Error W 10:32:49 Retrying (1 of 20)... I 10:32:51 Writing LeadIn... I 10:32:52 Writing Image... I 10:32:52 Writing Layer 0... (LBA: 0 - 2086911) I 10:54:24 Writing Layer 1... (LBA: 2086912 - 4006948) W 10:55:19 Failed to Write Sectors 2086912 - 2086943 - Power Calibration Area Error W 10:55:19 Retrying (1 of 20)... I 10:55:19 Writing Image... Verify croaks, apparently at the boundary. Can't play the DVD. Mounts like a blank CD. Why do I consistently get these same error messages every burn? What is it failing to write? the DL boundary info to the burned DVD? Could I have an incorrect setting in IMG Burn (I think I have all defaults)? Given I consistently get this same problem over and over again burning DL's (no successes yet), is the drive the problem? I can post a complete log for this (last) run if anyone thinks it can help. Edited January 11, 2006 by ArNolDs
polopony Posted January 11, 2006 Posted January 11, 2006 power calibration is where the drive samples the disc and sets the laser power level for the proper burn .I'd try using a disc type cleaned for the laser it might be dirty and the source of the problem, otherwise the drive may be on the way out make sure that your firmware is up to date.As said the Ritek d/l's arent enjoying the same success as say the single layer riteks .I did burn some Ritek GO4's a couple of years ago and they still work fine
LIGHTNING UK! Posted January 11, 2006 Posted January 11, 2006 Yes, I would say that the drive is the problem. It's probably cheaper to just buy a new one than to keep messing around making DL coasters!
ArNolDs Posted January 11, 2006 Author Posted January 11, 2006 (edited) power calibration is where the drive samples the disc and sets the laser power level for the proper burn .I'd try using a disc type cleaned for the laser it might be dirty and the source of the problem, otherwise the drive may be on the way out make sure that your firmware is up to date.As said the Ritek d/l's arent enjoying the same success as say the single layer riteks .I did burn some Ritek GO4's a couple of years ago and they still work fine Firmware is up to date (thx to CD Freaks as the seller provided firmware upgrade doesn't work). It's both Verbatims and Ritek dual layers that are failing. The discs should be clean already (they are brand new). I see about cleaning the burner. The single layers that are working very well are TDKs. The drive is under warranty. I'm now just looking for that explanation of the defect to use when calling them for replacement. It looks like it consistently fails to write on one section of the DL disc ??? Edited January 11, 2006 by ArNolDs
LIGHTNING UK! Posted January 11, 2006 Posted January 11, 2006 Have you tried cross flashing to a real liteon firmware rather than the sony version? It's failing to write to any DVD+R DL media really. That's where the power calibration failures are coming from. The drive / firmware isn't able to calculate a decent laser power to use for the actual burn. The real liteon firmware may have better support for DL media, that's why I said you should try cross flashing.
ArNolDs Posted January 11, 2006 Author Posted January 11, 2006 (edited) Have you tried cross flashing to a real liteon firmware rather than the sony version? I got my present firmware, PDS7, here: http://forum.rpc1.org/dl_firmware.php?download_id=1965 My very first attempt was a (probably) same-reason failure (with Verbatim) at the original supplied firmware of PDS3 (maybe it was PFS3). That's when I decided to upgrade. As to XFlashing I get as far as: http://www.liteonit.com/ODD/English/e_down...odel=SOSW-852SX but if I click any zip file I just get the same page back, no download (in all 4 browsers I got). How bizarre! :-( I guess I'll have to try again tomorrow. There is a warning on that LiteonIt site that you can't go back if u upgrade firmware. Is loading the same firmware version, perhaps from a different source, what u mean by "cross flashing"? Edited January 11, 2006 by ArNolDs
LIGHTNING UK! Posted January 11, 2006 Posted January 11, 2006 Go back over to cdfreaks. You can get LtnFlash from there (the flashing tool). You can also get onmipatcher. Download the bin file of the 852 firmware from the onmipatcher site and run it through omnipatcher to allow crossflashing. (i.e. going from Sony -> LiteOn). The LiteOn forum will help you out with all the info you need, you just need to read the right posts
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now