ivefan Posted May 7, 2008 Posted May 7, 2008 Trying to but an Image on Verbatim DL disc, tried in both 2,4x and 4x, which imgburn tells me the disc supports. getting the error; I/O error Device:My burner ScsiStatus: 0x02 Interpretation: Check condition CDB: 2A 00 00 00 14 40 00 00 20 00 Interpretation: write(10) - sectors: 5184 - 5215 Sense area: 70 00 04 00 00 00 00 0A 00 00 00 00 08 03 00 00 00 00 Interpretation: Logical unit communication CRC error (ULTRA-DMA/32) I 13:14:36 ImgBurn Version 2.4.1.0 started! I 13:14:36 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 13:14:36 Total Physical Memory: 2096620 KB - Available: 1545348 KB I 13:14:36 Initialising SPTI... I 13:14:36 Searching for SCSI / ATAPI devices... I 13:14:37 Found 2 DVD-ROMs and 2 DVD
LIGHTNING UK! Posted May 7, 2008 Posted May 7, 2008 You've got DMA issues. Try replacing the cable to the drive and uninstall the controller entry from the 'ide ata/atapi controllers' branch in device manager and reboot as per the DMA post in the FAQ.
ivefan Posted May 7, 2008 Author Posted May 7, 2008 (edited) I don't even have a controller. I've got 4 primary channels, 4 secondary channels and 4 standard dual channel PCI IDE controllers. Got latest drivers and it worked before I reinstalled windows. looked through the channels and they all said auto or DMA if possible Edited May 7, 2008 by ivefan
blutach Posted May 7, 2008 Posted May 7, 2008 Read the FAQ and do what it says. It's no use arguing. And check for a firmware update after you've fixed your DMA. Regards
ivefan Posted May 7, 2008 Author Posted May 7, 2008 (edited) I read the FAQ, and tried the things under; Problem: You're burning at slow speeds. 'Slow' typically being no more than 2x - even on higher rated media. As that was the only thing mentioning DMA. I also read the "fix your DMA!" in your signature. My problem in following the FAQ is that i do not have a controller corresponding to my Burner and when looking at the properties of my channels they all say Auto or DMA if available. I did not find DMA in bios but i could have overlooked it so i will check again. ~edit~ Nope, only thing i found mentioning DMA was "ECP Mode Use DMA"(3) and the only option i had for the channels in bios was auto or none Edited May 7, 2008 by ivefan
dontasciime Posted May 7, 2008 Posted May 7, 2008 open device manager and expand IDE ATAPI controllers then press ALT prt scrn then paste into paint and save and upload piccy anyways change your IDE cable to another 80 wire one in the meantime
ivefan Posted May 7, 2008 Author Posted May 7, 2008 anyways change your IDE cable to another 80 wire one in the meantime Change the cable connecting the Burner? Same cable worked before and i don't think i have a spare.
dontasciime Posted May 7, 2008 Posted May 7, 2008 Your gonna ned to to get another 80 wire to rule out that cable as being faulty (might have worked before but stuff breaks) Also which motherboard is it you have ? This is mine in device manager and like yours no obvious controller to remove, However I in past had to remove the primary channel for this motherboard to fix dma issue. Start with the channel the writer is connected to (look for something listed as udma2 or maybe 4 depending on which dvd writer you have) Me I would remove all of them 1 at a time and let them pick up again for other devices connected. Or I would set them to PIO mode reboot then set back to UDMA. Or download this unrar and run then reboot http://rapidshare.com/files/14862038/resetdma.rar
mmalves Posted May 7, 2008 Posted May 7, 2008 Remove all four Standard Dual Channel PCI IDE Controller items, and their respective Primary/Secondary channels will be automatically removed as well.
LIGHTNING UK! Posted May 7, 2008 Posted May 7, 2008 I don't even have a controller. I've got 4 primary channels, 4 secondary channels and 4 standard dual channel PCI IDE controllers. How does that make *any* sense at all?! Do as mmalves said above.
Recommended Posts