grego137 Posted May 15, 2008 Share Posted May 15, 2008 using Imgburn. I just did a ISO to Disc burn and got this messge . it happened after the burn when it was going through the "varify sectors" I have a 7.37 Gb movie project, using verbatim DVD+R DL x2.4 (singapore) burning at 4x It only gave me 1 layer break to choose from @ 54/46, I selected that and checked seamless. Error report: I/O Error Revise 0:1:0 Scsi Status: 0x02 Interpretation: Check condition CDB: 28 00 00 00 6F 00 00 01 00 Interpretation: Read (10) - Sector 28656 Sense area: 70 00 05 00 00 00 00 0E 00 00 00 00 64 00 00 00 00 00 Interpretation: Illegal mode for this track then gives me the following options: Cancel / Try Again / Continue and the only thing it responds to is cancel Any idea what this means?? thank you Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted May 15, 2008 Share Posted May 15, 2008 It means you got a bad burn. It's much easier if you just copy + paste everything from the Log window. Link to comment Share on other sites More sharing options...
grego137 Posted May 15, 2008 Author Share Posted May 15, 2008 It means you got a bad burn. It's much easier if you just copy + paste everything from the Log window. im wondering why this happened? did I do correct by selecting the chapter break & checking the seamless box? or are you supposed to do only one or the other? thanks for the reply Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted May 15, 2008 Share Posted May 15, 2008 It's nothing do with the LB position, the LBA/Sector the drive can't read is Waaaaaay before the layer break. Link to comment Share on other sites More sharing options...
blutach Posted May 16, 2008 Share Posted May 16, 2008 Check your firmware is up to date. Regards Link to comment Share on other sites More sharing options...
Recommended Posts